Canon network camera VBS805D User Manual
Here you can view all the pages of manual Canon network camera VBS805D User Manual. The Canon manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 31
![Page 31
31
2
Initial Settings
When initial camera settings are complete, access the
camera with the Camera Management Tool and check if
video can be viewed properly.
Access the Top Page from Camera
Management Tool
You can use the Camera Management Tool to launch the
camera top page.
The web browser will start and the camera top page
appears.
Note
The web browser will not start when [Connection Status] for a
camera is [Not connectable].
You can also launch the camera top page by entering the IP
address...](http://img.usermanuals.tech/thumb/14/1410/w300_network-camera-vbs805d-1478297761_d-30.png "Page 31
31
2
Initial Settings
When initial camera settings are complete, access the
camera with the Camera Management Tool and check if
video can be viewed properly.
Access the Top Page from Camera
Management Tool
You can use the Camera Management Tool to launch the
camera top page.
The web browser will start and the camera top page
appears.
Note
The web browser will not start when [Connection Status] for a
camera is [Not connectable].
You can also launch the camera top page by entering the IP
address...")
31 2 Initial Settings When initial camera settings are complete, access the camera with the Camera Management Tool and check if video can be viewed properly. Access the Top Page from Camera Management Tool You can use the Camera Management Tool to launch the camera top page. The web browser will start and the camera top page appears. Note The web browser will not start when [Connection Status] for a camera is [Not connectable]. You can also launch the camera top page by entering the IP address...
Page 32
![Page 32
32
The factory default user name and password are:
User Name: root
Password: camera
The user name “root” is the administrator account for the
camera.
Note
Only administrators can connect to a camera using the Setting
Page and Admin Tools.
Authorized users with camera control privileges can also
connect using Admin Viewer. You can set the user privileges of
registered users with [Access Control] > [User Authority] on
the Setting Page (p. 64).
Depending on the security settings in Internet...](http://img.usermanuals.tech/thumb/14/1410/w300_network-camera-vbs805d-1478297761_d-31.png "Page 32
32
The factory default user name and password are:
User Name: root
Password: camera
The user name “root” is the administrator account for the
camera.
Note
Only administrators can connect to a camera using the Setting
Page and Admin Tools.
Authorized users with camera control privileges can also
connect using Admin Viewer. You can set the user privileges of
registered users with [Access Control] > [User Authority] on
the Setting Page (p. 64).
Depending on the security settings in Internet...")
32 The factory default user name and password are: User Name: root Password: camera The user name “root” is the administrator account for the camera. Note Only administrators can connect to a camera using the Setting Page and Admin Tools. Authorized users with camera control privileges can also connect using Admin Viewer. You can set the user privileges of registered users with [Access Control] > [User Authority] on the Setting Page (p. 64). Depending on the security settings in Internet...
Page 33
Access the Top Page of the Camera to Check Video 33 2 Initial Settings
Page 34
34
Page 35
Chapter 3 Setting Page ❏Administrator Password and Network Detailed Settings ❏Camera Date and Time Settings ❏Camera Name and Initial Camera Settings Related Settings ❏Video Size and Quality Settings ❏RTP Streaming Settings ❏Upload and E-mail Notification Settings ❏Video Server, Audio Server, HTTP/FTP Server and WS-Security Settings ❏Settings Related to Events ❏Administrator Password, User Registration/Authorities and Access Restriction Settings ❏IPsec Settings ❏HTTP Communication Encryption (SSL/TLS)...
Page 36
36 From the Setting Menu, you can navigate to each setting page to set various items regarding the camera. Information describing what can be set from each setting page is listed as follows. See each setting page for details. Administrator password, LAN, IPv4, IPv6, DNS, mDNS and SNMP Settings (p. 40) Date and Time Camera date and time, time zone and daylight saving time settings (p. 44) Camera Camera name, initial camera settings, camera control, day/night, installation conditions, camera...
Page 37
![Page 37
Setting Menu
37
Setting Page
3
Important
Notes on Use with Internet Explorer 8/9/10/11
If the pop-up is blocked and an information bar appears when
attempting to access [View Logs] or [View Current Settings] on
the maintenance page, enable Pop-up by following the procedure
explained in the information bar.](http://img.usermanuals.tech/thumb/14/1410/w300_network-camera-vbs805d-1478297761_d-36.png "Page 37
Setting Menu
37
Setting Page
3
Important
Notes on Use with Internet Explorer 8/9/10/11
If the pop-up is blocked and an information bar appears when
attempting to access [View Logs] or [View Current Settings] on
the maintenance page, enable Pop-up by following the procedure
explained in the information bar.")
Setting Menu 37 Setting Page 3 Important Notes on Use with Internet Explorer 8/9/10/11 If the pop-up is blocked and an information bar appears when attempting to access [View Logs] or [View Current Settings] on the maintenance page, enable Pop-up by following the procedure explained in the information bar.
Page 38
![Page 38
38
The various settings of the camera are configured by accessing the camera in the web browser. First, access the top page
of the camera (p. 31).
For details on entering the user name and password, see p. 31.
Note
You can also access the Setting Page from the Camera Management Tool. For details, please refer to the “Camera Management Tool User
Manual”.
Setting Menu
(1) [Admin Viewer]
Clicking this button opens Admin Viewer.
(2) [Back to top]
Clicking this button navigates to the top page....](http://img.usermanuals.tech/thumb/14/1410/w300_network-camera-vbs805d-1478297761_d-37.png "Page 38
38
The various settings of the camera are configured by accessing the camera in the web browser. First, access the top page
of the camera (p. 31).
For details on entering the user name and password, see p. 31.
Note
You can also access the Setting Page from the Camera Management Tool. For details, please refer to the “Camera Management Tool User
Manual”.
Setting Menu
(1) [Admin Viewer]
Clicking this button opens Admin Viewer.
(2) [Back to top]
Clicking this button navigates to the top page....")
38 The various settings of the camera are configured by accessing the camera in the web browser. First, access the top page of the camera (p. 31). For details on entering the user name and password, see p. 31. Note You can also access the Setting Page from the Camera Management Tool. For details, please refer to the “Camera Management Tool User Manual”. Setting Menu (1) [Admin Viewer] Clicking this button opens Admin Viewer. (2) [Back to top] Clicking this button navigates to the top page....
Page 39
![Page 39
Accessing the Setting Menu
39
Setting Page
3
„Returning to the Setting Menu
Click [Settings menu] at the top right of each setting page
to return to the Setting Menu.
Note
Click on [Help] at the beginning of any item to display a
detailed explanation of that setting item.
Important
Do not open multiple setting pages at one time and try to
change the settings of a single camera.
Do not use the [Back] or [Forward] buttons in the web
browser to navigate between setting pages. The changed
settings...](http://img.usermanuals.tech/thumb/14/1410/w300_network-camera-vbs805d-1478297761_d-38.png "Page 39
Accessing the Setting Menu
39
Setting Page
3
„Returning to the Setting Menu
Click [Settings menu] at the top right of each setting page
to return to the Setting Menu.
Note
Click on [Help] at the beginning of any item to display a
detailed explanation of that setting item.
Important
Do not open multiple setting pages at one time and try to
change the settings of a single camera.
Do not use the [Back] or [Forward] buttons in the web
browser to navigate between setting pages. The changed
settings...")
Accessing the Setting Menu 39 Setting Page 3 „Returning to the Setting Menu Click [Settings menu] at the top right of each setting page to return to the Setting Menu. Note Click on [Help] at the beginning of any item to display a detailed explanation of that setting item. Important Do not open multiple setting pages at one time and try to change the settings of a single camera. Do not use the [Back] or [Forward] buttons in the web browser to navigate between setting pages. The changed settings...
Page 40
![Page 40
40
Administrator Password
(1) [Password]
Set the administrator password. Up to eight (single-
byte) ASCII characters (space or printable
characters) can be used. The factory default setting is
“camera”. If the Admin Viewer, Admin Tools, etc., are
connected, terminate the connection before changing
the password.
(2) [Confirm Password]
Enter the same password as above for confirmation. LAN
(1) [LAN Interface]
Select [Auto], [Full Duplex] or [Half Duplex]. Normally
[Auto] is used.
(2) [Maximum...](http://img.usermanuals.tech/thumb/14/1410/w300_network-camera-vbs805d-1478297761_d-39.png "Page 40
40
Administrator Password
(1) [Password]
Set the administrator password. Up to eight (single-
byte) ASCII characters (space or printable
characters) can be used. The factory default setting is
“camera”. If the Admin Viewer, Admin Tools, etc., are
connected, terminate the connection before changing
the password.
(2) [Confirm Password]
Enter the same password as above for confirmation. LAN
(1) [LAN Interface]
Select [Auto], [Full Duplex] or [Half Duplex]. Normally
[Auto] is used.
(2) [Maximum...")
40 Administrator Password (1) [Password] Set the administrator password. Up to eight (single- byte) ASCII characters (space or printable characters) can be used. The factory default setting is “camera”. If the Admin Viewer, Admin Tools, etc., are connected, terminate the connection before changing the password. (2) [Confirm Password] Enter the same password as above for confirmation. LAN (1) [LAN Interface] Select [Auto], [Full Duplex] or [Half Duplex]. Normally [Auto] is used. (2) [Maximum...