Canon network camera VBS805D User Manual
Here you can view all the pages of manual Canon network camera VBS805D User Manual. The Canon manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 21
Notes on Operating Environment 21 1 Before Use „Enabling the Sound Function to Use Audio In Windows Server 2008/Windows Server 2012, the sound function is disabled by default. To receive audio with the Viewer, follow the steps below to enable the sound function. Note If [Control Panel] is in the classic view, double-click [Sound]. Important Note that when IE Enhanced Security Configuration is turned back on, the [Do not save encrypted pages to disk] checkbox also becomes enabled. 1Open [Control...
Page 23
Chapter 2 Initial Settings ❏Preparing the Camera for Use ❏Installing the Necessary Software ❏Initial Settings ❏ Access the Top Page of the Camera to Check Video
Page 24
24 ▼ ▼ ▼ ▼ ▼ ▼ Preparing the Camera for Use Performing Initial Settings for the Camera Before installing the camera, read this chapter and use the Camera Management Tool to configure the IP address. “Installing the Necessary Software” (p. 26) “Making Initial Camera Settings” (p. 28) Checking Video When initial settings are complete, access the camera via a web browser and check the video using the VB Viewer. “Access the Top Page of the Camera to Check Video” (p. 31) Installing the Camera Install the...
Page 25
Preparing the Camera for Use 25 2 Initial Settings Operating If an error message appears or the camera fails to operate correctly, see the error message and log message information in “Chapter 6 Appendix”. “Chapter 6 Appendix” Important Before starting operations, make sure that the setting page and Admin Tools settings are functioning correctly.
Page 26
26 Install the following software to perform initial settings for the camera. Camera Management Tool: Software required for performing initial camera settings and maintenance Admin Tools Certificate: An electronic certificate that is required for using Admin Viewer and Admin Tools .NET Framework 3.5 SP1/.NET Framework 4.5: The execution environment required for network camera software (not required if already installed on the computer) You can perform either an Easy Installation or a Custom...
Page 27
Installing the Necessary Software 27 2 Initial Settings The Camera Management Tool icon appears on the desktop.
Page 28
28 To use the camera, you must first set the network settings for the camera and then establish a network connection between the camera and a computer. Use Camera Management Tool for these settings. This section will explain, in addition to network settings, how to set the camera name, the date and time and other settings. It will also explain how to use the Camera Management Tool to make initial camera settings. Note For details on using Camera Management Tool, please refer to “Camera Management...
Page 29
Making Initial Camera Settings 29 2 Initial Settings (2) [IPv4 Address] If you selected [IPv4 Address Setting Method] > [Manual], enter a fixed IPv4 address. (3) [Subnet Mask] If you selected [IPv4 Address Setting Method] > [Manual], enter the designated subnet mask values for each network. (4) [Enter a default gateway address] checkbox Select this to manually set the default gateway address. (5) [IPv4 Default Gateway Address] Be sure to set this if you select [IPv4 Address Setting Method] >...
Page 30
30 „Video Settings Click [Video] and configure the size and quality settings of the video transmitted from the camera. For setting details, please refer to “[Video] Setting Video Size, Quality and Frame Rate” (p. 50). Registering Camera’s IP Address to Trusted Sites With Internet Explorer 9 or greater and Windows Server 2008/Windows Server 2012, Internet Explorer’s security level for Internet and intranet sites is set to [High] by default. As a result, it may be necessary to register the camera’s...