Canon network camera VBR10VE User Manual

Admin Tools
6
211
Video Detection
Detects changes to video in a specified area. Th ere are 6 types of detection to suit your needs.
Moving Object Detection
Detect moving objects. This function can be used  to detect visitors or suspicious individuals.
Moving object detection is triggered while mo ving objects are inside the detection area.
Abandoned Object Detection
Detect objects that are carried in and abandoned for a certain duration. Th is function can be used to detect 
suspicious objects that have...

212
Camera Tampering Detection
Detect when capture is being disrupted. This can be used to detect when the camera orientation is changed or the 
video display is obscured with spray, etc. Camera ta mpering detection is triggered when an area exceeding a 
specified ratio of change is continuously altered.
Passing Detection
Detect when a person or moving  object crosses a specified line.
This determines that an object is passing when the decisi on point of the object detection frame crosses a detection...

Admin Tools
6
213
Intrusion Detection
Detect when a person or moving object crosses a specified area. This can be used to detect actions such as when 
someone climbs over a barrier and enters a restricted area in  a museum, etc. This determines that an object is entering 
when the decision point of the object detection frame enters the detection area and the specified duration has elapsed.
 Auto Tracking
The camera automatically tracks an object when it is detect ed moving in a detection area. This...

214
• If the camera is operated while configuring or using the Intelligent Functio n, [Restarting intelligent function. Please wait.] 
is shown and the Intellige nt Function will restart.
 If the display switches between Day mode and Night mode, [R estarting intelligent function. Please wait.] is shown and 
intelligent function will restart.
 If [Basic Settings] > [Video Se ttings] > [All Videos] > [Video Size Set] setti ngs on the Setting Page are changed, be sure 
to change the preset position settings...

Admin Tools
6
215
A confirmation screen appears.
[Video Detection]
When you click [Yes], the Intelligent Function Setting Tool launches with its [Lock camera position] selected. If 
you click [No], select [Lock camera position] after video detection launches.
[Auto Tracking]
If you click [Yes], you will obtain camera control and can configure Auto Tracking settings. If you click [No], 
obtain camera control after Auto Tracking launches and configure Auto Tracking settings.
When [Video Detection] is sel...

216
In video detection, select the type to detect, and set the tracking area for video changes while checking images on the 
camera. You should also set which operati ons (e-mail notification, record video, playing audio from the speaker connected 
to the camera) should be carried  out when changes are detected.
Steps for Configuring Video Detection
The following are the basic steps for configuring video detection.  For details on settings for each type of detection, please 
refer to “Configure Detection...

Admin Tools
6
217
– Presets configured within the view restrictions.
– Presets with pan, tilt and zoom setting values (no empty entries) configured in the [Preset Registration] tab. (P. 171)
Note
You can register up to 15 detection settings.
The added detection setting will appear in the [Detection Setting List] and [Detect Criteria] tab.
To disable detection settings, clear this check box.
2Click [Add] in [Detection  Setting List].
3Select [Detection Setting Number] (1 to 15) and [Detection Type] for...

218
Set criteria in the video display area or [Detection Criteria] tab (P. 219). The detection criteria differ according to 
the detection type.
Set which operations to carry out for vi deo detection in the [Event] tab (P. 227).
The settings are saved to the camera.
Note
To restore settings, click [Restore Settings] before saving. Thi s discards the settings you have specified and restores the settings 
saved in the camera.
6Configure the detection criteria.
7Configure event settings.
8Click [ Save...

Admin Tools
6
219
You can check the detection status of the specified detection settings in video display area and the event display 
panel (P. 234).
Configure Detection Criteria  ([Detection Criteria] Tab)
Detection criteria is controlled  and set in the video display area  for each type of detection. 
Settings Common to Each Detection Type
(1) [Detection  Settings Name]
Enter a detection name of 64 characters or less. Be  sure to enter a name in [Detection Settings Name].
(2) [Area  Shape]
Configure...

220
Drag the area to move it, and drag the vertices to resize it.
You can specify polygonal areas with a maximum of 32 vertices.
Note
If you change the shape of a detection area  you have already configured, the area is deleted and you switch to configuring a ne w 
area.
[Clear]
The detection area configured with [Polygonal] is deleted.
(3) [Display Color] Select the color for detection areas and detection lines.
How to Configure Moving Object Detection
Set the area you want to detect a mo ving object...