Canon network camera VBR10VE User Manual
Here you can view all the pages of manual Canon network camera VBR10VE User Manual. The Canon manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 131
![Page 131
Setting Page
4
131
Mount Status
The memory card will be automatically mounted when you insert it into the memory card slot. It will also be
automatically mounted if it has been inserted in the memory car d slot when the camera starts up.
[Mount/Unmount]
Click [Unmount] to unmount the memory card.
Be sure to unmount the memory card when turning off t he power to the camera or removing the memory card.
[Operation Settings]
Select the data to save to the memory card.
For details on the video saved...](http://img.usermanuals.tech/thumb/14/1401/w300_network-camera-vbr10ve-1478297221_d-130.png "Page 131
Setting Page
4
131
Mount Status
The memory card will be automatically mounted when you insert it into the memory card slot. It will also be
automatically mounted if it has been inserted in the memory car d slot when the camera starts up.
[Mount/Unmount]
Click [Unmount] to unmount the memory card.
Be sure to unmount the memory card when turning off t he power to the camera or removing the memory card.
[Operation Settings]
Select the data to save to the memory card.
For details on the video saved...")
Setting Page 4 131 Mount Status The memory card will be automatically mounted when you insert it into the memory card slot. It will also be automatically mounted if it has been inserted in the memory car d slot when the camera starts up. [Mount/Unmount] Click [Unmount] to unmount the memory card. Be sure to unmount the memory card when turning off t he power to the camera or removing the memory card. [Operation Settings] Select the data to save to the memory card. For details on the video saved...
Page 132
![Page 132
132
[Overwrite videos]
Select whether to allow overwriting data when the available space on the memory card becomes too low while
recording video to a memory card due to an event being triggered.
If you select [Enable], videos recorded due to an event, timer or ONVIF will be overwritten starting from the oldest file.
[Auto Video Delete]
Select to automatically delete video from the memo ry card that has exceeded the [Days Saved] setting.
If you select [Enable], set [D ays Saved] and [Delete Time]....](http://img.usermanuals.tech/thumb/14/1401/w300_network-camera-vbr10ve-1478297221_d-131.png "Page 132
132
[Overwrite videos]
Select whether to allow overwriting data when the available space on the memory card becomes too low while
recording video to a memory card due to an event being triggered.
If you select [Enable], videos recorded due to an event, timer or ONVIF will be overwritten starting from the oldest file.
[Auto Video Delete]
Select to automatically delete video from the memo ry card that has exceeded the [Days Saved] setting.
If you select [Enable], set [D ays Saved] and [Delete Time]....")
132 [Overwrite videos] Select whether to allow overwriting data when the available space on the memory card becomes too low while recording video to a memory card due to an event being triggered. If you select [Enable], videos recorded due to an event, timer or ONVIF will be overwritten starting from the oldest file. [Auto Video Delete] Select to automatically delete video from the memo ry card that has exceeded the [Days Saved] setting. If you select [Enable], set [D ays Saved] and [Delete Time]....
Page 133
![Page 133
Setting Page
4
133
[Memory Card Recognition]
Displays the current stat us of the memory card.
[Memory Card Operation Status]
Displays the operation st atus of the memory card.
[Operable]: Status of various possible operations.
[Recreating video management information]: This status indicates that video management information is being recreated.
Other operations cannot be performed.
[Deleting videos]: This status indicates that vide os are being deleted. Other operations cannot be performed.
[Video...](http://img.usermanuals.tech/thumb/14/1401/w300_network-camera-vbr10ve-1478297221_d-132.png "Page 133
Setting Page
4
133
[Memory Card Recognition]
Displays the current stat us of the memory card.
[Memory Card Operation Status]
Displays the operation st atus of the memory card.
[Operable]: Status of various possible operations.
[Recreating video management information]: This status indicates that video management information is being recreated.
Other operations cannot be performed.
[Deleting videos]: This status indicates that vide os are being deleted. Other operations cannot be performed.
[Video...")
Setting Page 4 133 [Memory Card Recognition] Displays the current stat us of the memory card. [Memory Card Operation Status] Displays the operation st atus of the memory card. [Operable]: Status of various possible operations. [Recreating video management information]: This status indicates that video management information is being recreated. Other operations cannot be performed. [Deleting videos]: This status indicates that vide os are being deleted. Other operations cannot be performed. [Video...
Page 134
![Page 134
134
Check camera information, such as the firmware version, and perform maintenance on the camera system.
Device Information
Displays information about the connected camera.
Tool
You can display camera logs and settings, initialize and backup/restore settings.
[View Logs]
Display a history of camera operations and connections to each viewer, etc.
[View Current Settings]
Display a list of current se ttings for the Setting Page.
[View License]
Display information on 3rd party software licenses.
[Reboot]...](http://img.usermanuals.tech/thumb/14/1401/w300_network-camera-vbr10ve-1478297221_d-133.png "Page 134
134
Check camera information, such as the firmware version, and perform maintenance on the camera system.
Device Information
Displays information about the connected camera.
Tool
You can display camera logs and settings, initialize and backup/restore settings.
[View Logs]
Display a history of camera operations and connections to each viewer, etc.
[View Current Settings]
Display a list of current se ttings for the Setting Page.
[View License]
Display information on 3rd party software licenses.
[Reboot]...")
134 Check camera information, such as the firmware version, and perform maintenance on the camera system. Device Information Displays information about the connected camera. Tool You can display camera logs and settings, initialize and backup/restore settings. [View Logs] Display a history of camera operations and connections to each viewer, etc. [View Current Settings] Display a list of current se ttings for the Setting Page. [View License] Display information on 3rd party software licenses. [Reboot]...
Page 135
![Page 135
Setting Page
4
135
Note
It is recommended that you note down each current setting before you click [Exec] in [Restore Default Settings].
The camera can be restored to factory default settings using the reset switch as well. Note, however, that this will reset all camera
settings to factory default settings except for date and time (P. 270).
[Back Up Settings]
All settings, except date and time, will be backed up to the memory card.
The IP address, certificates used by SSL and 802.1X and private...](http://img.usermanuals.tech/thumb/14/1401/w300_network-camera-vbr10ve-1478297221_d-134.png "Page 135
Setting Page
4
135
Note
It is recommended that you note down each current setting before you click [Exec] in [Restore Default Settings].
The camera can be restored to factory default settings using the reset switch as well. Note, however, that this will reset all camera
settings to factory default settings except for date and time (P. 270).
[Back Up Settings]
All settings, except date and time, will be backed up to the memory card.
The IP address, certificates used by SSL and 802.1X and private...")
Setting Page 4 135 Note It is recommended that you note down each current setting before you click [Exec] in [Restore Default Settings]. The camera can be restored to factory default settings using the reset switch as well. Note, however, that this will reset all camera settings to factory default settings except for date and time (P. 270). [Back Up Settings] All settings, except date and time, will be backed up to the memory card. The IP address, certificates used by SSL and 802.1X and private...
Page 136
136
Page 137
Chapter Admin Viewer/VB Viewer Access the Viewers included on the camera with a web browser to view and use live video, and configure those display settings.
Page 138
138 Two types of Viewers are included on the camera, the Admin Viewer and the VB Viewer. All panels are opened in these sample screenshots. Major Differences Between the Admin Viewer and the VB Viewer The scope of operations for Admin Viewer and VB Viewer differ. Admin Viewer: This viewer, in addition to using video, gives users administrative controls, such as for shooting conditions or event detection display. VB Viewer: This viewer is limited to basic im age operations for viewing images. Viewer...
Page 139
![Page 139
Admin Viewer/VB Viewer
5
139
The scope of each privilege and whether it can be granted to a user is shown below.
Note
The factory default setting gives privileged camera control to [Authorized User] as well.
If you disable all guest user privileges, the user authenticati on dialog box will appear when you launch the VB Viewer. When the name
and password for an authorized user or admi nistrator are entered, the VB Viewer can be used with authorized user or administrator
privileges, respectively....](http://img.usermanuals.tech/thumb/14/1401/w300_network-camera-vbr10ve-1478297221_d-138.png "Page 139
Admin Viewer/VB Viewer
5
139
The scope of each privilege and whether it can be granted to a user is shown below.
Note
The factory default setting gives privileged camera control to [Authorized User] as well.
If you disable all guest user privileges, the user authenticati on dialog box will appear when you launch the VB Viewer. When the name
and password for an authorized user or admi nistrator are entered, the VB Viewer can be used with authorized user or administrator
privileges, respectively....")
Admin Viewer/VB Viewer 5 139 The scope of each privilege and whether it can be granted to a user is shown below. Note The factory default setting gives privileged camera control to [Authorized User] as well. If you disable all guest user privileges, the user authenticati on dialog box will appear when you launch the VB Viewer. When the name and password for an authorized user or admi nistrator are entered, the VB Viewer can be used with authorized user or administrator privileges, respectively....
Page 140
![Page 140
140
Launch the Admin Viewer to check the camera status and view video, and to configure settings.
Launch the Admin Viewer
A user authentication window appears.
Launches the Admin Viewer.
Note
You can also launch the Admin Viewer from the Camera Managem ent Tool. For details, please refer to the “Camera Management
Tool User Manual”.
You can also launch the Admin Viewer by cl icking [Admin Viewer] in the upper right of the [Admin Tools] page (P. 193).
In environments without a proxy server, select...](http://img.usermanuals.tech/thumb/14/1401/w300_network-camera-vbr10ve-1478297221_d-139.png "Page 140
140
Launch the Admin Viewer to check the camera status and view video, and to configure settings.
Launch the Admin Viewer
A user authentication window appears.
Launches the Admin Viewer.
Note
You can also launch the Admin Viewer from the Camera Managem ent Tool. For details, please refer to the “Camera Management
Tool User Manual”.
You can also launch the Admin Viewer by cl icking [Admin Viewer] in the upper right of the [Admin Tools] page (P. 193).
In environments without a proxy server, select...")
140 Launch the Admin Viewer to check the camera status and view video, and to configure settings. Launch the Admin Viewer A user authentication window appears. Launches the Admin Viewer. Note You can also launch the Admin Viewer from the Camera Managem ent Tool. For details, please refer to the “Camera Management Tool User Manual”. You can also launch the Admin Viewer by cl icking [Admin Viewer] in the upper right of the [Admin Tools] page (P. 193). In environments without a proxy server, select...