Canon network camera VBH730F User Manual

[SSL/TLS] Setting HTTP Communication Encryption
81
Setting Page
4
(6) [Display Server Certificate Details] 
Click [Exec] to view the details of the server 
certificate. 
(7) [Display Self CA Certificate] 
Used for the purpose of testing SSL communications, 
but otherwise not normally used. 
(8) [Backup] 
Click [Exec] to perform a backup of the certificates 
and private key. This operation can only be performed 
when [HTTPS Connection Policy] is set to use [HTTPS] 
or [HTTP and HTTPS], and SSL...

82
802.1X Authentication
(1) [802.1X Authentication]
Set 802.1X authentication to [Disable] or [Enable].
If [802.1X Authentication] is set to [Enable] and [Exec] 
is clicked, “Before changing the setting, set 802.1X 
authentication to “Disable”.” is displayed below the 
setting items and all settings are disabled, including 
changing the authentication method and installation/
deletion of certificates.
To change settings, first set [802.1X Authentication] to 
[Disable] and click [Exec].
(2)...

[802.1X] Network Port Authentication Settings
83
Setting Page
4
(5) [Delete Certificate]
Deletes all installed CA certificates, client certificates, 
and client private keys. Only “CA Certificate” is 
displayed when [Authentication Method] is set to 
[EAP-TTLS] or [EAP-PEAP], but any installed client 
certificates and client private keys are also deleted.
Important
 If any CA certificates, client certificates, and client private 
keys already exist, they are discarded and new versions are 
installed.
 An...

84
Memory Card Operations (unmount status) 
(1) [Mount/Unmount] 
In unmount status, [Mount] will appear. Click [Mount] 
to mount the MEMORY card. 
Note
SD, SDHC and SDXC memory cards can be used with the 
camera.
When an MEMORY card is inserted in the card slot, it is mounted 
automatically. It is also mounted automatically if inserted in the 
camera at the time of booting. 
For inserting and removing the MEMORY card, see “Installation 
Guide” > “Using an Memory Card”. 
(2) [Operation Settings] 
Set...

[Memory Card] Memory Card Operations and Settings
85
Setting Page
4
Note
The quick formatting method is used.
Memory Card Operations (mount status) 
(1) [Mount/Unmount] 
In mount status, [Unmount] will appear. Click 
[Unmount] to unmount the 
memory card. 
(2) [Operation Settings], [Video Format], [Pre-event 
Buffer], [Post-event Buffer], [Overwrite videos]
These settings are the same as in “Memory Card 
Operations (unmount status)”.
(3) [Delete Videos] 
Click [Exec] to delete videos from the memory...

86
Note
For accessing files saved to the memory card, see “Memory Card 
Access” (p. 162). 
Important
Information recorded to the memory card may be regarded as 
“personal information”. Take sufficient precautions for handling 
this information when releasing to third parties for disposal, 
transfer or repair.  

87
4
Setting Page
(1) [LAN] 
LAN interface, maximum packet size settings (p. 50)
(2) [IPv4] 
IP address, IPv4 settings, etc. (p. 50) 
(3) [IPv6] 
Settings regarding IPv6 (p. 51) 
(4) [Installation Conditions] 
Dome setting (p. 59) 
(5) [HTTP Server] 
Authentication method, HTTP, and HTTPS port 
settings (p. 70) 
[Reboot Item] Setting Items Requiring Rebooting 
The following settings that require rebooting before 
changes take effect can be found on a single page. 
 LAN, IPv4, IPv6, Installation...

88
Device Information
[Model Name], [Firmware Version], [Serial Number], [Build 
Number], [MAC address] 
Displays information about the currently connected 
camera.
Tool
(1) [View Logs] 
Display a history of camera operations and 
connections to each viewer, etc. 
(2) [View Current Settings] 
Display a list of current settings. 
(3) [Reboot] 
The camera is rebooted. 
(4) [Restore Default Settings] 
Except for the following items, all user-defined 
settings will be discarded and restored to factory...

[Maintenance] Viewing Current Settings, Event Logs and Performing Maintenance
89
Setting Page
4
e-mail when [Enable] is selected.
For details on log messages, see [List of Log 
Messages] (p. 168).
(2) [Notification Level]
Select [Error], [Errors and warnings], or [All] for the 
log message notification level.
For details on log messages, see [List of Log 
Messages] (p. 168).
(3) [Copy E-mail Settings]
Copy the mail settings used in [Upload] > [E-mail 
Notification] (p. 68).
(4) [Mail Server Name] 
Enter...

90