Canon network camera VBH651V User Manual

Setting Page
5
171
the detection type.
Set which operations to carry out for video detection in the [Event] tab (P. 184).
The settings are saved to the camera.
Note
To restore settings, click [Clear] before  applying. This discards the settings you have  specified and restores the settings saved in 
the camera. However, note that detection settings only added to  the detection setting area by clicking [Add] are all discarded.
You can check the detection stat us of the specified detection settings in...

172
The non-detection area settings added in [Non-detection Area Settings] are displayed and [Enable non-detection 
area] is selected.
Note
 Up to five non-detection area settings can be registered.
 To disable non-detection area settings, cl ear the [Enable non-detection area] checkbox.
 To delete non-detection area settings, select the non-detection  area settings to delete and click [Delete] in Non-detection Area 
Settings (List).
Click the mouse to create a polygon. For information on th e creation...

Setting Page
5
173
Note
 You can create a polygonal area with a maximum of 32 vertices. You cannot set a non-detection area with only a straight line.
 Click [Clear Area] to set the non-detection area again.
 Enter [Non-detection Area Name (within 64 hal f-width alphanumeric characters)] as necessary.
 The non-detection area is displayed in the video display  area in black. The display color cannot be selected.
The settings are saved in the camera.
Note
Click [Clear] to discard the settings and restore...

174
Settings Common to Each Detection Type
(1) [Detection Settings Name (within 64 half-width alphanumeric characters)]
Enter a detection name. Be sure to enter a name in [Detection Settings Name].
(2) [Area Shape] Configure whether the detection area is  a rectangle or a free-shape polygon.
Note
You cannot select [Area Shape] for camera tampering detection.
Using [Rectangular]
Configure the detection area by moving, resizing or changing  the shape of the rectangle that is displayed in the 
video...

Setting Page
5
175
[Clear Area]
The detection area configured with [Polygonal] is deleted.
(3) [Display Color] Select the color for detection areas and detection lines.
How to Configure Moving Object Detection
Set the area you want to detect a mo ving object in as a detection area.
This determines how large the moving ob ject must be in relation to the detection area you set in step 2 for motion 
detection to be triggered.
When the setting values or slider is  changed, an indicator frame representing...

176
Note
If an object is placed in or removed from the moving object detection area, “detected”  status will be triggered for Moving Object 
Detection.
 How to Configure Abandoned Object Detection
Set the area you want to detect an aband oned object in as a detection area.
This determines how large the abandoned  object must be in the detection area you set in step 2 to detect as an 
abandoned object.
When the setting values or slider is  changed, an indicator frame representing the object size is...

Setting Page
5
177
How to Configure Remo ved Object Detection
Set an area around the target objects, for Removed Obje ct Detection. The following methods are available for 
configuring removed object detection.
– Setting a broad area for det ecting the removal of objects
– Specifying the profile lines of objects for removal detection
If you cannot detect the intended objects usin g one of these methods, use the other method.
Setting a Broad Area for Detecting Removed Objects
Configure the following...

178
Specifying the Profile Lines of Objects for Removal Detection
Temporarily remove the target object for removed object detection from the video display area.
▼
Click [Restart intelligent function] (P. 187).
The background image is generated ▼
Return the target object to its original position.
▼
Click [Automatic Profile Settings].
A profile line of the object is drawn using a polygon with up to 32 vertices.
If there are multiple objects detected,  the profile lines are drawn around the object occupying...

Setting Page
5
179
Click [Restart intelligent function] again.
Detection Status for Removed Object Detection
All moving objects detected are shown with profile lines.
If you set [Object Size (%)] and [Duration (Sec)], the following occurs.
If [Object Size (%)] and [Duration (Sec)] are not met, the profile line is displayed with a white line.
If both [Object Size (%)] and [Duration (Sec)] are exceeded, the profile line is displayed in the same color as the 
detection area to indicate that  something has...

180
Detection Status for Camera Tampering Detection
Moving objects detected are shown with profile lines.
If an object is smaller than [Change Ratio (%)], its profile lines are white.
If the obscured area in the video exceeds [Change Ratio (%)], profile lines take on the same color as the detection 
area, indicating that the came ra has “detected” tampering.
Note
Detection will not be possible for three seconds after the change ratio for camera tampering detection is changed, or when 
switching to camera...