Canon network camera VBH610VE User Manual

List of Log Messages
161
8
Appendix
R304 Abnormal termination of client [err]
R304 Client disconnected [err]
R304 Client disconnected [err]
R305 RTSP processing error [err]
Description delete session from some kind of error: 
client_IP=%1, session_ID=%2 (R304)
%1 Client IP address
%2 Session ID
Meaning The client session terminated abnormally.
Description connection reset by peer: 
client_IP=client_IP=%1 (R304)
%1 Client IP address
Meaning Disconnected from client.
Description RTP/HTTP connection closed...

162
Messages Displayed in the Information Field
Messages displayed in the information field of the viewer are classified into the following three types.
„Information Messages
List of Viewer Messages
IconCategoryExplanation
  Information Message Help messages on various buttons, pull-down lists, etc., as well as frame rate and other 
information from the camera are shown. 
  Warning Message A message will be displayed notifying the user when camera control privileges cannot 
be obtained, the audio session...

List of Viewer Messages
163
8
Appendix
„Warning Messages
MessageExplanation
Could not connect to the camera.  Connection failed due to an invalid IP address, etc. 
The camera is busy.  The connection limit was exceeded. 
Failed to get camera control privileges.  The request for camera control privileges was denied because the camera 
was being used by the Admin Viewer, etc. 
Failed to establish audio connection.  Connection for audio reception failed. 
You are not connected to the camera.  An attempt was...

164
It is recommended that you write down the settings for respective camera functions. If you have forgotten the settings and 
want to set the camera from the beginning, restore the factory default settings first. 
*For factory default settings, see p. 166. 
Restoring the Initial Setting from the 
Maintenance Page in the Web Browser
To display the settings menu, you need to enter the IP 
address of the camera, user name and administrator 
password (p. 42).  
The maintenance page appears. 
A confirmation...

Restore Default Settings
165
8
Appendix
For dome case attachment, see the “Installation 
Guide” included with the camera.
Important
If the reset switch is pushed, network-related settings will also 
be restored to factory default settings including the cameras IP 
address, subnet mask, default gateway address, etc. 
Accordingly, you can no longer operate the camera from the 
PC you were using to connect to the camera before. When 
initializing the camera, use the “VB Initial Setting Tool” installed 
in...

166
List of Factory Default Settings
ItemSetting
  User Name (Administrator ID)  root
  Administrator password camera
  Path to setting pages admin

LAN Interface Auto
Maximum Packet Size 1500

IPv4 Address Setting Method Manual
IPv4 Address   192.168.100.1
Subnet Mask 255.255.255.0
IPv4 Default Gateway Address
AutoIP Enable
IPv4 Address (AutoIP)

IPv6 Enable
Auto (RA) Enable
Auto (DHCPv6) Enable
IPv6 Address (Manual) 
Prefix Length 64
IPv6 Default Gateway Address
IPv6 Address (Auto) 
 DNS
Name Server...

List of Factory Default Settings
167
8
Appendix
 External Input Device 1
Device Name (alphanumeric 
characters) 
 External Input Device 2
Device Name (alphanumeric 
characters) 
 External Output Device 1
Device Name (alphanumeric 
characters) 
 External Output Device 2
Device Name (alphanumeric 
characters) 

Video Quality: 320 x 240 3
Video Quality: 480 x 270 3
Video Quality: 960 x 540 3
Video Quality: 1920 x 1080 3
Video Quality: 
Digital PTZ 3
Video Size: Video Transmission 480 x 270
Maximum Frame...

168
Audio Transmission Disable
 General Upload
Upload Upload Disabled
Video Format JPEG
Frame Rate 1
Pre-event Buffer (number of 
frames)0
Post-event Buffer (number of 
frames)0
Pre-event Buffer (sec) 0
Post-event Buffer (sec) 0
 HTTP Upload
Notification Notification Only with 
HTTP
URI
User Name
Proxy Server
Proxy Port 80
Proxy User Name
Parameter (query string) 
 FTP Upload
Notification Video data upload with 
FTP
FTP Server
User Name
PASV Mode Enable
File Upload Path
File Naming YYMMDDHHMMSSms...

List of Factory Default Settings
169
8
Appendix
 External Device Output 2
Operation Mode Normally Open
Active Output Format Continuous
Pulse Output Time (sec) 1
 External Device Input External Device Input Event Enable
 External Device Input 1 Operation Mode Normally Open
Active Event Operation Disable
Inactive Event Operation Disable
Ongoing Active Event Operation Disable
Preset None
Video Record Disable
E-mail Notification Disable
External Device Output for 
Active Event Disable
External Device Output...

170
 User Authority
Authorized User
Privileged Camera Control Checked
Camera Control Checked
Video Distribution Checked
Audio Distribution Checked
Guest user
Camera Control Checked
Video Distribution Checked
Audio Distribution Checked
 IPv4 Host Access Restrictions
Apply Host Access Restrictions Disable
Default Policy Authorize Access
Network Address / Subnet 01: / 32 Yes
     02: / 32 Yes
03: / 32 Yes
04: / 32 Yes
05: / 32 Yes
06: / 32 Yes
07: / 32 Yes
08: / 32 Yes
09: / 32 Yes
10: / 32 Yes
11: / 32...