Canon network camera VBC50iVBC50iR User Manual

7-19
Appendix
Sample Network Configurations
This section describes some typical installation modes for the VB-C50i/V\
B-C50iR.
Be sure to assign an IP address to the VB-C50i/VB-C50iR that matches you\
r environment.
This example shows the VB-C50i/VB-C50iR connected to a LAN by Ethernet. \
In this configuration,
videos can be seen by viewers in the same Ethernet segment as the VB-C50\
i/VB-C50iR and by
viewers with access to that segment.
Sample Configuration in an ISP Environment
This example shows an...

7-20
Upgrading the Firmware Remotely
Note
●Do not turn the power off until you have confirmed that the VB-C50i/VB-C\
50iR has
restarted. Turning the power off before completion may prevent it from s\
tarting up
properly.
● Upgrading the firmware deletes all saved web page data ( → P.5-8). Back up your
data before using this function.
Get the new firmware from Canon Web site, and upgrade in command prompt.\
 The firmware file
is called “Firmware_new.bin” and is saved on your PC in “My Doc\
uments”.
1....

7-21
Appendix
Restoring the Factory Default Settings
Since the VB-C50i/VB-C50iR supports a wide variety of functions, we reco\
mmend that you make
a note of the settings for each function (→ P.7-23).  If you want to redo the settings from the
beginning because you have forgotten them or for some other reason, firs\
t restore the factory
default settings.
* Please refer to page 7-23 for more about the factory default settings.
Restoring the Factory Default Settings from the Administration Tools Page via...

7-22
Restoring the Factory Default Settings
Note
●Do not turn the VB-C50i/VB-C50iR power off while the Restoring operation\
. Turning
the power off before completion may prevent it from starting up properly\
.
● If you click the “OK” button at this point, it will not possible t\
o abort the process to
restore the default settings. Click the “Cancel” button if you do \
not wish to restore
the default settings.
● Using “Restore Settings” deletes all saved web page data ( → P.5-8). Back up your
data before...

7-23
Appendix
Initializing the Camera Head Position
○○○○○○To Make Settings...
1. Launch the Web browser and enter the following URL:
http://192.168.100.1/support/
*
 The underlined portion is a sample IP address. Enter the actual IP addre\
ss set for the VB-C50i/VB-
C50iR(
→  P.3-6).
You need the IP address, user name, and the administrator password for t\
his camera to
display the Initialize Camera Head Position page( → P.3-5).
2. In the Initialize Camera Head Position, perform necessary settings.
If...

7-24
Note
During initializing,
●The camera head moves to face front, and then moves back to the current \
position.
Please note that video will be recorded during this time, if using VK-64\
 or other
recording software.
● Live video is displayed on the Viewer.
● Video out of the visible range may be displayed.
● Initializing precedes any Viewer control privileges.
● Motion detection and Preset Tour functions are suspended.
● Video recording, audio recording and audio playback are not available.
●...

7-25
Appendix
Factory Default Settings
Item Setting Item Setting 1 Item setting 2 (m)      (d)      (y) (m)      (d)      (y)
●Administrator ID root
● Administrator password VB-C50i
●Settings page path admin●Ethernet
Address Setting Method Manual Setting
IP Address 192.168.100.1
Subnet Mask 255.255.255.0
Default Gateway Address
Maximum Transmission Unit 1500
● Connection Keeping
Send packet regularly NO
Target IP Address
Interval(min.) 1
●Video Capture
Video Capture Size
Video Transmission Medium Size...

7-26
Factory Default Settings
Item Setting Item Setting 1 Item setting 2 (m)      (d)      (y) (m)      (d)      (y)
●Server(Common Settings)
Maximum Number of Clients 50
Maximum Connection Time (sec.) 0
Restrict Service Time NO
● HTTP Server
HTTP Port 80
Global Address for Web Pages IP Address
IP Address
Port Name
● Camera Server
Video Transmission Port 65310
Camera Control Port 65311
Maximum Frame Rate (fps) 30 (NTSC)/25 (PAL)
Maximum Transmission Rate (Mbps) 0
Control Queue Length 50
Camera Control...

7-27
Appendix
Data Capacity of Recorded Pictures and Audio*
Note
The information provided in this section is an indication only.
Please be sure to confirm under the actual conditions before starting op\
erations.
*
 Audio recording is only available with two particular models.
This section provides information that may help you in specifying and co\
nfiguring various settings
using the VB-C50i/VB-C50iR.
The VB-C50i/VB-C50iR can be used in a wide range of applications with it\
s feature to temporarily...

7-28
NoteThe actual amount of audio data will vary according to the timing of rec\
ording.
Amount of Audio Data*
Regardless of the volume, and even if there is no recorded audio data, t\
he amount of audio data
is approx. 8KB per second.
Data Capacity of Recorded Pictures & Audio
Note
●If you set the Video Quality to 100, the amount of data becomes enormous\
ly large.
● The recorded pictures are saved in the VB-C50i/VB-C50iR memory in units \
of
8KB. For example, an image data of 5KB takes the memory of...