Canon network camera VBC50iVBC50iR User Manual

7-9
Appendix
Log Messages
Message
●B103 Client access forced disconnection (notice)
%1 access denied[%2]
Explanation
%1Client host IP address
%2Denial type (41 | 42 | ...) There was a forced disconnection because access was forbidden since 
settings have been changed, although the access had been permitted at 
first (the same denial type as B102).
Message
● B111 Au dio file error (notice)
[%1] file not found [%2]
%2
File number
Explanation
There is no audio file registered.
Response
Check audio file...

7-10
Log Messages
Message
●B401 Audio device initialization failed (crit)
audio device initialization error[%1]
%1Error number
Response
If rebooting does not solve this problem, there is a malfunction. Contac\
t an 
authorized Canon service representative.
Explanation
Initialization of the audio device has failed. The audio server will shut down.
Message
●
B302 Reception audio device error (err)
cannot use audio device for rx[%1:%2]
%2
Error number
Explanation
Response
An error in the audio device has...

7-11
Appendix
Message
Explanation
● S005 System settings changed (info)
System settings updated
The VB software settings were modified without a reboot. 
■  System-related Log Messages
Message
%1
%2
%3
●H043 User not found (notice)
HTTPD: %1: user %2 not found: %3
Client host IP address
User name
URL
Explanation
Y ou have specified an unknown user in user authentication. 
Message
%1
●S004 System start and stop (info)
%1 webview
starting and stopping
Explanation
Starting and stopping of the video server...

7-12
Log Messages
Fault Severity
Fault which affects task execution
Fault which does not affect task execution
Level
Error
Wa rning
Information on correct operationInformation
The VBCollector Log Messages
The VBCollector log messages are classified into the following 3 categor\
ies.
■  Log messages output by Task Scheduler Service
● S100 (info)
Message VBCollector Task Scheduler Service has started.
●S101 (info)
Message VBCollector Task Scheduler Service has stopped.
●S102 (err)
Message Stops the...

7-13
Appendix
Log Messages
●S011 (err)
Message Execution failure: Access to the data directory was denied.
Explanation The drive for storing files does not exist or the service could not log \
on to the remote host specified as Data Directory.
 ●S015 (warning)
Message The task was running longer than the execution interval.
Explanation The specified task did not end before the start time of the next task.
● S019 (err)
Message The account information is invalid.
Explanation The user information cannot be...

7-14
Log Messages
●D001 (info)
Message Download has started.
●D002 (info)
Message Download is completed: image=%1audio=%2 [delete:image=%3
audio=%4]
%1 No. of downloaded images
%2 No. of downloaded audio files
%3 No. of deleted images
%4 No. of deleted audio files
● D003 (warning)
Message Download has aborted.
●D010 (err)
Message Not enough memory.
●D011 (err)
Message Communication error.
●D020 (err)
Message Cannot start because the server is recreating the list of the recorded
pictures.
●D021 (err)...

7-15
Appendix
Log Messages
●D025 (err)
Message Could not perform data deletion and audio file download because login
as Administrator failed.
●D029 (err)
Message Download is aborted because of insufficient free space.
●D035 (info)
Message The number of downloaded data has reached to the limit.
Explanation Output when the download limit for a single download has been reached.
● D050 (err)
Message Failed to start the downloader.
●D051 (err)
Message Downloader was stopped due to time-out.
●D052 (err)...

7-16
VB-C50i/VB-C50iRVideo signal Conforms to NTSC/PALImage Sensor 1/4-inch CCDNumber of pixels NTSC Effective 340,000PAL Effective 400,000
Synchronization InternalScanning Method 2 : 1 interlacedMin. subject illumination Day mode: 1Lux (F1.6, color, NTSC: 1/30 sec PAL: 1/25 sec)Night mode: 0.35Lux (F1.6, monochrome, NTSC: 1/30 sec PAL: 1/25 sec) /with infrared lamp 0Lux(F1.6, monochrome, NTSC: 1/30 sec PAL : 1/25 sec\
)
Imaging modes Day mode/Night modeFocusingDay mode/Night mode: Auto/Manual...

7-17
Appendix
Specifications
+3.3V
0.1 µF
10k
Ω 10kΩ 10k
Ω
Internal controllerInput terminals 
IN+, IN–
Output terminals 
OUT A, OUT B, OUT C
+
–
External Device I/O Terminals
You can use Input/Output external devices together with the Multi-Termin\
al Module VB-EX50.
External Device Input Terminals (IN+, IN–)
The external device input terminals consist of 2 terminals (IN+, IN-). The ‘–’ terminal is grounded
on the inside of the main unit. By connecting 2 cables to the + and ‘\
–’ terminals and then...

7-18
Note
●Install the Viewer for PC from the “VBToolsInstall.exe” file on th\
e supplied CD-
ROM ( → P.2-11).
● The User’s Manual for the viewer software is provided on the supplied\
 CD-ROM
(Viewer-E.pdf).
● To connect the VB-C50i/VB-C50iR to the Internet, you require a leased li\
ne connection
to an Internet service provider or a LAN-type dial-up IP connection. If \
you are using a
LAN-type dial-up connection, check that the connection supports bidirect\
ional calling.
System Configuration
This...