Canon Maxify Mb5320 User Guide

13.Enter the password (8 to 10 characters).14.
Tap OK to finish entering the password.
15.
Tap  OK to finish specifying the password setting.
Note
•
If you change the access point mode setting of the machine, also change the access point setting of
the external device such as a computer or a smartphone.
281
 

Registering the Favorite Settings (Custom profiles)You can register the favorite copying, scanning, or faxing settings and call them up from the HOME screen.
You can register up to 20 settings.
Registering the Setting
Calling Up the Registered Setting
Editing/Deleting the Registered setting
Registering the Setting
Tap  Save profile  on each standby screen or on the screen displayed after the settings are specified.
Copy standby screenScan standby screenFax transmission standby screen
When the...

1.Make sure that the machine is turned on.2.
Flick the HOME screen, then tap  Custom profiles .
Using the Operation Panel
3.
Tap Edit/delete .
You can change the order or name of the registered settings and delete the settings.
•
To change the order of the registered settings
1.
Tap  Rearrange .
2.
Tap the setting you want to move.
3.
Tap  or  to move the selected setting.
4.
Tap Apply .
5.
Tap Exit.
•
To change the name of the registered settings
1.
Tap  Rename .
2.
Tap the setting you want to rename....

Checking the Total Number of Uses of the MachineYou can check the total number of uses of the machine (e.g. the total number of printing, copying, sending/
receiving faxes, or scanning).1.
Make sure that the machine is turned on.
2.
Flick the HOME screen, then tap   Records of use .
Using the Operation Panel
The  Records of use  screen is displayed.
3.
Tap the item to check.
Total sheets used on the device Displays the total number of printing.
You can check the total number of black and white printing,...

Information about Network Connection
Useful Information about Network Connection
285
 

Useful Information about Network Connection
Default Values Set at Factory (Network)
Connecting the Machine to the Computer Using a USB Cable
When Detecting the Printers Have the Same Name during Setup
Connecting to Other Computer with LAN/Changing the Connection Method
from USB to LAN
Printing Out Network Setting Information
286
 

Default Values Set at Factory (Network)Default Values of the LAN ConnectionItemThe defaultChange LANDisable LANSSIDBJNPSETUPCommunication modeInfrastructureWireless LAN securityDisableIP address  (IPv4 )Auto setupIP address  (IPv6 )Auto setupSet printer name *XXXXXXXXXXXXEnable/disable IPv6EnableEnable/disable WSDEnableTimeout setting1 minuteEnable/disable BonjourEnableService nameCanon MB5300 seriesLPR protocol settingEnableWireless LAN DRX settingEnableWired LAN DRX settingEnable
("XX"...

Connecting the Machine to the Computer Using a USB CableConnect the machine and the computer using a USB cable as the illustration below. The USB port is located
on the rear of the machine.288
 

When Detecting the Printers Have the Same Name during SetupWhen the printer is detected during setup, you may see multiple printers of the same name on the detection
result screen.
Select a printer with checking the MAC address or the serial number set to the printer against that on the detection result screen.
Note
•
A serial number may not be displayed on the detection result screen.
To check the MAC address of the printer, print out the network setting information using the operation panel
of the...

Connecting to Other Computer with LAN/Changing the Connection
Method from USB to LAN
To add the computer connecting the machine with LAN or to change the connection method between the
machine and the computer from USB to LAN, perform setup with the Setup CD-ROM or perform it according
to the instructions on our website.
Connecting to Other Computer with LANTo add the computer connecting the machine with LAN, perform setup with the Setup CD-ROM orperform it according to the instructions on our website....