Canon Maxify Mb5320 User Guide

Changing the Machine Settings Using the Operation Panel
Changing the Machine Settings Using the Operation Panel
FAX settings
Print settings
LAN settings
Device user settings
Language selection
Firmware update
Cassette settings
Administrator password setting
Operation restrictions
Reset setting
About ECO settings
About Quiet setting
Using the Machine with the Access Point Mode
251
 

Changing the Machine Settings Using the Operation PanelThis section describes the procedure to change the settings in the  Device settings screen, taking the steps
to specify  Prevent paper abrasion  as an example.1.
Make sure that the machine is turned on.
2.
Flick the HOME screen, then tap  Setup .
Using the Operation Panel
3.
Tap  Device settings .
The  Device settings  screen is displayed.
4.
Tap the setting item to adjust.
The setting screen for the selected item is displayed.
5.
Tap the setting...

You can select the setting menus below.
FAX settings
Print settings
LAN settings
Device user settings
Language selection
Firmware update
Cassette settings
Administrator password setting
Operation restrictions
Reset setting
Important
•
Depending on the setting item, authentication by the administrator password is required.
About the Machine Administration
If you do not know the administrator password, ask the administrator of the machine you are using.
Note
•
You can use the machine considering the...

FAX settings
Important
•
This setting item is for the administrator.
This section describes the setting items in  FAX settings.
FAX user settings
Advanced FAX settings
Auto print settings
Auto save setting
Security control
Easy setup
Note
•
Before changing the settings, you can confirm the current settings by printing USER'S DATA LIST.
Summary of Reports and Lists
FAX user settings
•
User information settings
Registers your name and fax/telephone number printed on sent faxes.
Registering User...

If you select ON, the machine transmits the fax after confirming the dial tone.
Note
•
This setting may not be available depending on the country or region of purchase.
•
Pause time settings
Sets the length of pause time for each when you enter "P" (pause).
•
TTI position
Selects the position of the sender information (outside or inside the image area).
•
Remote RX
Enables/disables remote reception.
If you select  ON, you can specify the remote reception ID.
Remote Reception
•
Color transmission...

Auto print settings•
Received documents
Selects whether to print the received fax automatically when receiving a fax.
If you select  Do not print , the received fax is stored in the machine's memory.
For details on the received fax stored in the machine's memory:
Document Stored in Machine's Memory
•
Activity report
Selects whether to print ACTIVITY REPORT automatically.
If you select  Print, the machine prints ACTIVITY REPORT for the 20 histories of sent and received
faxes automatically.
For...

•Check RX FAX information
If you select  ON, the machine checks whether the recipient's fax machine information matches the
dialed number. If it matches the number, the machine starts to send faxes.
Preventing Mistransmission of Faxes
•
Hook key setting
If you select  Enable, you can use the on hook function.
•
FAX reception reject
If you select  ON, the machine rejects the reception of faxes with no sender information or faxes from
specific senders.
Rejecting Fax Reception
•
Caller rejection
If you...

Print settings•
Prevent paper abrasion
Use this setting only if the print surface becomes smudged.
Important
•
Be sure to set this back to  OFF after printing since it may result in lower printing speed or lower
print quality.
258
 

LAN settings
Important
•
This setting item is for the administrator.
•
Change LAN
Enables either wireless LAN, wired LAN, or access point mode. You can also disable all.
•
Wireless LAN setup
Selects the setup method for wireless LAN connection.
Note
•
You can also enter this setting menu by selecting  WLAN on the HOME screen. In this case, enable
wireless LAN.
When this menu is selected, the machine starts searching for a WPS-compatible access point. If the
machine detects the access point, follow the...

ConnectionActive/InactiveSSIDXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXCommunication modeInfrastructureChannelXXWireless LAN securityInactive/WEP(64bit)/WEP(128bit)/WPA-PSK(TKIP)/WPA-PSK(AES)/WPA2-
PSK(TKIP)/WPA2-PSK(AES)IPv4 addressXXX. XXX. XXX. XXXIPv4 subnet maskXXX. XXX. XXX. XXXIPv4 default gatewayXXX. XXX. XXX. XXXIPv6 addressXXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXXIPv6 subnet prefix lengthXXXIPv6 default gatewayXXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXXMAC addressXX:XX:XX:XX:XX:XXIPsec...