Canon Maxify Mb5020 User Guide

Notice for the Power Plug/Power CordCheck the power plug/power cord once a month to confirm that it does not have anything unusual describedbelow.•
The power plug/power cord is hot.
•
The power plug/power cord is rusty.
•
The power plug/power cord is bent.
•
The power plug/power cord is worn.
•
The power plug/power cord is split.
Caution
•
If you find anything unusual with the power plug/power cord described above, unplug the power cord
and call for service. Using the machine with one of the unusual...

Notice for Unplugging the Power CordTo unplug the power cord, follow the procedure below.
Important
•
When you unplug the power cord, press the  ON button, then confirm that the  POWER lamp is off.
Unplugging the power cord before the  POWER lamp is turned off may cause drying or clogging of the
print head and print quality may be reduced.
•
If the power cord is unplugged, all documents stored in the machine's memory will be lost. Send or print a necessary document, or save it on a USB flash drive...

Using the Operation PanelThe operation panel consists of the touch screen (A) and buttons (B).Touch the HOME screen on the touch screen with your finger tip to select menus for copying, scanning, and
other functions.
The HOME screen comprises three separate screens.
A: touch screen
B: Buttons on the operation panel
Basic Operation of the touch screen
Touch the touch screen lightly with your finger tip or move your finger to access various functions or
settings.
Important
•
When operating the touch...

Touch
Touch lightly with your finger tip.
To move forward (or go back) menus or photos continuously, keep touching the forward (or back) mark.
Flick
Flick your finger on the screen up, down, left, or right. Use to switch menus or move forward or backward through photos.
Drag
While lightly touching the screen, move your finger up, down, left, or right.
Use to view lists of items or move sliders.
154
 

An Operation Example of the touch screen
Example: The touch screen operations available on the copy standby screen
Tap A to display the print settings menu.
Drag the screen up or down, then tap the option you want to select.
After the list is displayed, tap the setting to select.
Tap B to display the screen for selecting the number of copies.
Tap the numbers to specify the number of copies, then tap  OK.
155
 

Tap C to display the preview screen.
Drag the sidebar (D) up or down to enlarge or reduce the zoom % while viewing the preview image at left.
Tapping  or  (E) also changes the zoom. Hold your finger on  or  to continuously change
the magnification.
After the copy magnification is selected, tap  OK.
156
 

Entering Numbers, Letters, and SymbolsThe machine allows you to enter or edit characters by selecting them from an on-screen character list whenentering information, such as unit name, a recipient's name for the directory, etc.
Switching the Input Mode
The machine has an alphabetic mode and number/symbol mode. To switch between them, tap 
 (A)
at the bottom left.
To switch between lower and upper case modes in the alphabetic mode and the type of symbols in the
number/symbol mode, tap 
 (B).
Note
•...

Entering or Editing Numbers, Letters, and Symbols
The input method is as follows.
•
To move the insertion position (cursor position) in the entry field (C)
Tap 
 or  (D).
•
To delete an entered character
Move the cursor under the character to delete, then tap 
 (E).
Keep on touching 
 to continue deleting characters.
•
To insert a space
Tap 
 (F).
After entry is complete, tap  OK (G).
Key assignments for multiple languages
Repeatedly tap the same key until the character you want to enter is displayed in...

Loading Paper / Originals
Loading Paper
Loading Originals
Inserting the USB Flash Drive
159
 

Loading Paper
Paper Source to Load Paper
Loading Plain Paper / Photo Paper
Loading Envelopes
Media Types You Can Use
Media Types You Cannot Use
Printing Area
160