Canon Maxify Mb2020 User Guide

2001Cause
The device incompatible with the machine is connected.
Action Check the device connected to the USB flash drive port. Printing photos directly is possible with a USB
flash drive.1041
 

2002Cause
An unsupported USB hub is connected.
Action If a USB flash drive is connected to the machine through the USB hub, disconnect the hub from the
machine.
Connect a USB flash drive directly to the machine.1042
 

2110Cause
The paper settings for printing or copying are different from the cassette paper information registered to
the machine.
Note
•
For details on the proper combination of paper settings you can specify by the printer driver or on the LCD:
Setting the Media Type with the Printer Driver and on the Printer  (Windows)
Setting the Media Type with the Printer Driver and on the Printer  (Mac)
Setting the Paper Size with the Printer Driver and on the Printer (Windows)
Setting the Paper Size with the...

Select what to do as necessary.
Note
•
Depending on the setting, the choices below may not be displayed.
Print with paper in cass. settings Select if you want to print on the paper loaded in the cassette without changing the paper settings.
For example, when the paper setting for printing or copying is B5 and the cassette paper information
registered to the machine is A4, the machine starts printing or copying with B5 on the paper loaded in
the cassette.
Replace the paper and print Select if you want to...

Note•
You can disable the message which prevents misprinting. When you disable the message, themachine starts printing or copying even though the paper settings for printing or copying and the
cassette paper information registered to the machine are different.
•
To change the setting using the operation panel:
Cassette settings  (Windows)
Cassette settings (Mac)
Cassette settings (Smartphone and so on)
•
To change the setting using the printer driver:
Changing the Printer Operation Mode  (Windows)...

2120Cause
The paper settings of the cassette is not complete.
Action
If the following screen is displayed, the paper settings of the cassette is not complete.
Press the machine's  OK button to terminate the paper settings of the cassette.
1046
 

2500Cause
The cause of following may have occurred the failure of Automatic Print Head Alignment.•
Print head nozzles are clogged.
•
The paper of size other than A4 or Letter is loaded.
•
The paper output slot is exposed to strong light.
Action
Press the machine's  OK button to dismiss the error, then take the actions described below.
•
Print the nozzle check pattern to check the status of the print head.
•
Load one sheet of A4/Letter-sized plain paper and perform Automatic Print Head Alignment...

2700Cause
Possible causes include the following.•
Some errors occurred while copying and a certain time passed.
•
Document is remained in the ADF.
•
Some errors occurred while scanning and the document is remained in the ADF.
Action Take the corresponding actions below.
•
When you copy, press the  OK button to dismiss the error, and try to copy again.
•
When the document is remained in the ADF, press the  OK button to feed out the document.
•
When you scan, press the  Stop button to cancel the scanning,...

2802Cause
No document in the ADF.
Action Press the  OK button to resolve the error, then operate again after loading documents.1049
 

2803Cause
The document is too long or is jammed in the ADF.
Action Press the  OK button to dismiss the error. Then make sure that the document you are loading meets the
machine's requirements before redoing the operation.
If the document is jammed, remove the jammed document following the procedure below.•
If the original is jammed in the ADF: Remove the document following the procedure below.
1.
If printing is in progress, press the  Stop button.
2.
Turn off the machine.
3.
If a multi-page document...