Canon Maxify Ib4020 User Guide

Energy Star®
The Energy Star ®
 programme is a voluntary scheme to promote the development and purchase of
energy efficient models, which help to minimise environmental impact.
Products which meet the stringent requirements of the Energy Star ®
 programme for both environmental
benefits and the amount of energy consumption will carry the Energy Star ®
 logo accordingly.
Paper types
This product can be used to print on both recycled and virgin paper (certified to an environmental stewardship scheme),...

Main Components and Basic Operations
Main Components
About the Power Supply of the Printer
LCD and Operation Panel
112
 

Main Components
Front View
Rear View
Inside View
Operation Panel
113
 

Front View
(1) operation panelUse to change the settings of the printer or to operate it.
Operation Panel
(2) front cover Open to replace an ink tank or remove jammed paper inside the printer.
(3) paper output tray Pull out to support printed paper. It will then cover the cassette. Pull out for normal use.
(4) cassette 1 Accepts all sizes of paper compatible with this printer (plain paper, photo paper, envelopes, etc.).
Paper Sources to Load Paper
(5) cassette 2 Accepts A4, Letter, and Legal-sized plain...

Rear View
(1) rear coverOpen when removing jammed paper.
(2) power cord connector Plug in the supplied power cord.
(3) wired LAN connector Plug in the LAN cable to connect the printer to a LAN.
(4) USB port Plug in the USB cable to connect the printer with a computer.
Important
•
Do not touch the metal casing.
•
Do not plug in or unplug the USB cable or LAN cable while printing.
115
 

Inside View
(1) ink tank eject leverPush up when removing an ink tank.
(2) print head holder The print head is pre-installed.
Note
•
For details on replacing an ink tank, see Replacing an Ink Tank .
116
 

Operation Panel* All lamps on the operation panel are shown lit in the figure below for explanatory purposes.
(1) LCD (Liquid Crystal Display) Displays messages, menu items, and the operational status.
(2) ON button Turns the power on or off.
Turning the Printer On and Off
(3) POWER lamp Lights after flashing when the power is turned on.
(4) Stop button Cancels a print job in progress.
(5) Alarm lamp Lights or flashes when an error occurs.
(6) OK button Finalizes the selection of a menu or setting item....

About the Power Supply of the Printer
Confirming that the Power Is On
Turning the Printer On and Off
Notice for the Power Plug/Power Cord
Notice for Unplugging the Power Cord
118
 

Confirming that the Power Is OnThe  POWER  lamp is lit when the printer is turned on.
Even if the LCD is off, if the  POWER lamp is lit, the printer is on.
Note
•
It takes about 10 seconds until you can operate the printer after you turn on its power. Wait until the
standby screen is displayed on the LCD.
•
The LCD will turn off if the printer is not operated for about 5 minutes. To restore the display, press anybutton except the  ON button on the operation panel or perform the print operation.
119
 

Turning the Printer On and OffTurning on the printer1.
Press the  ON button to turn on the printer.
The  POWER  lamp flashes and then remains lit.
Confirming that the Power Is On
Note
•
It takes about 10 seconds until you can operate the printer after you turn on its power. Wait until
the standby screen is displayed on the LCD.
•
If the  Alarm  lamp lights up or flashes and an error message is displayed on the LCD, see A
Message Is Displayed .
•
You can set the printer to automatically turn on when a...