Canon Lv-s4 Multimedia Projector Owners Manual

21
Basic Operation
Menu Bar
PC System Menu
Used to select
computer system.
(p25)
Image Adjust Menu
Used to adjust computer image. [Contrast / Brightness / Color
temp. / 
White balance (R/G/B) /
Gamma](p30)
Setting Menu
Used to change
settings of the
projector or reset  lamp
replace counter. 
(p38-44)
Sound Menu
Used to adjust
volume or mute
sound.  (p23)
Image Select Menu
Used to select  an image
level among Standard,
High contrast,
Blackboard(Green), and
Custom.  (p29)
For computer source
AV System...

Press the NO SHOW button on the remote control unit to black
out the image.  To restore to normal, press the NO SHOW button
again or press any other button.  When a projected image is
captured and set as “User” in the Logo item in the Setting Menu
(p40), the screen changes each time you press the NO SHOW
button as follows.
The message disappears after 4 seconds.black out ➜the captured image ➜normal ➜• • • • •
No Show Function
22
Basic Operation
Press the FREEZE button on the remote control unit to freeze...

23
Basic Operation
1
2
Press the MENU button and the On-Screen Menu will
appear.  Press the Point 
7 8buttons to move the red frame
pointer to the Sound Menu icon.  Volume
Press the VOL +/– buttons on the top control or on the remote
control unit to adjust volume.  The volume dialog box appears on
the screen for a few seconds.
+ button to turn up the volume and – button to turn down the
volume.
Mute
Press the MUTE button on the remote control unit to cut off the
sound.  To restore sound to its previous...

24
Select Computer by pressing the INPUT button on the top control
or press the COMPUTER button on the remote control unit.
Before using these buttons, correct input source should be
selected through menu operation as described below.
Press the MENU button and the On-Screen Menu will
appear.  Press the Point 
7 8buttons to move the red frame
pointer to the Input Menu icon.1
Computer 
Input Menu
Press the Point ed button to move the red arrow pointer to
Computer and then press the OK button.  2
After the...

25
Computer Input
The Auto PC Adj. function
operates to adjust the
projector. 
PC System Menu
The PC System Menu icon 
displays the system being
selected.
Systems on this dialog box
can be selected.Press the MENU button and the On-Screen Menu will
appear.  Press the Point 
7 8buttons to move the red frame
pointer to the PC System Menu icon.
Press the Point d d 
 button to move the red arrow pointer to
the system that you want to set, and then press the 
OK
button.  
1
2
PC System Menu
Custom Mode (1~5)...

26
Computer Input
The Auto PC Adj. function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical to conform to
your computer.  The Auto PC Adj. function can be operated as follows.
Move the red frame pointer to
the Auto PC Adj. icon and
press the OK button.
Wait a moment! message
appears while Auto PC
adjustment is in process.
PC Adjust Menu
PC Adjust Menu icon
To store adjustment parameters
Adjustment parameters from Auto PC Adj. can be memorized in
this projector.  Once...

27
Computer Input
Press the MENU button and the On-Screen Menu will
appear.  Press the Point 
7 8buttons to move the red frame
pointer to the PC Adjust Menu icon.1
2Press the Point d dbutton to move the red frame pointer to
the item that you want to adjust and then press the OK
button.  An adjustment dialog box will appear.  Press the
Point 
7 8buttons to adjust the value.Move the red frame pointer to
an item and press the OK
button.
PC Adjust MenuPC Adjust Menu icon
Eliminate flicker from the displayed...

28
Computer Input
Press the OK button to display the Display area dialog box.  Select
the resolution at the Display area dialog box.Display area
Adjust the horizontal area displayed by this projector.  Press the
Point 7 8buttons to decrease/increase the value and then press
the OK button.Display area H
Adjust the vertical area displayed by this projector.  Press the Point
7 8buttons to decrease/increase the value and then press the OK
button.Display area V
With this function on, SXGA image is fully...

29
Computer Input
Press the MENU button and the On-Screen Menu will
appear.  Press the Point 
7 8buttons to move the red frame
pointer to the Image Select Menu icon.1
2Press the Point d dbutton to move the red frame pointer to
the level that you want to set and then press the OK button.
Move the red frame pointer to
the level and press the OK
button.
The level being selected.
Image Select Menu
Normal picture level preset on this projector.Standard
Picture adjustment improved in reproduction of the...

30
Computer Input
Press the Point 7 8 buttons to
adjust value.
Press the MENU button and the On-Screen Menu will
appear.  Press the Point 
7 8buttons to move the red frame
pointer to the Image Adjust Menu icon.1
2Press the Point d dbutton to move the red frame pointer to
the item that you want to adjust, and then press the OK
button.  The level of each item is displayed.  Adjust each
level by pressing the Point 
7 8buttons.Move the red frame pointer to
the item to be selected and
then press the OK...