Canon Lv-s4 Multimedia Projector Owners Manual

E
English
Multimedia Projector
Owner’s Manual
LV-S4 

2
Features and Design
◆Compact Design
This projector is designed compact in size and weight.  It is
easy to carry and work anywhere you wish to use.
◆Compatibility
The projector widely accepts various video and computer
input signals including; Computers, 6 Color systems (PAL,
SECAM, NTSC, NTSC4.43, PAL-M, PAL-N), Component
Video, S-video and RGB scart.
◆Simple Computer System Setting
The projector has the Multi-scan system to conform to
almost all computer output signals quickly.  (See page 25.)
◆Auto...

3
Table of Contents
Features and Design  . . . . . . . . . . . . . . . . . . .2
Table of Contents  . . . . . . . . . . . . . . . . . . . . . .3
To the Owner  . . . . . . . . . . . . . . . . . . . . . . . . .4
Safety Instructions  . . . . . . . . . . . . . . . . . . . .5
Air Circulation 6
Installing the Projector in Proper Position 6
Moving the Projector 6
Compliance  . . . . . . . . . . . . . . . . . . . . . . . . . .7
Part Names and Functions  . . . . . . . . . . . . . .8
Front 8
Back 8
Bottom 8
Rear...

4
To the Owner
CAUTION : T O  REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK).  NO USER-SERVICEABLE PARTS
INSIDE EXCEPT LAMP REPLACEMENT.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE
IMPORTANT OPERATING AND MAINTENANCE
INSTRUCTIONS IN THE OWNERS MANUAL WITH
THIS UNIT.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Before operating this...

5
Safety Instructions
All the safety and operating instructions should be read before
the product is operated.
Read all of the instructions given here and retain them for later
use.  Unplug this projector from AC power supply before
cleaning.  Do not use liquid or aerosol cleaners.  Use a damp
cloth for cleaning.
Follow all warnings and instructions marked on the projector.
For added protection to the projector during a lightning storm,
or when it is left unattended and unused for long periods of
time,...

6
Safety Instructions
USE CAUTION IN CARRYING OR 
TRANSPORTING THE PROJECTOR
–Do not drop or bump the projector, otherwise damages or
malfunctions may result.
–When carrying the projector, use a suitable carrying case.
–Do not transport the projector by using a courier or transport
service in an unsuitable transport case.  This may cause
damage to the projector.  To transport a projector through a
courier or transport service, consult your dealer for their
information.
Moving the Projector
CAUTION...

7
Compliance
Federal Communication Commission Notice
Multimedia Projector, Model : LV-S4E and LV-S4U
This device complies with Part  15 of the FCC Rules.  Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the...

8
qFocus Ring
wInfrared Remote Receiver
eProjection Lens
rZoom Lever
tLens Cover
yAir Intake Vent
uExhaust Vent
qAir Intake Vent 
wTerminals and Connectors
ePower Cord Connector
rExhaust Vent 
tTop Controls and Indicators
qAir Filters 
wAir Intake Vents
eAdjustable Feet
e
w
q
u
y
t
r
i
w
q
t
r
CAUTION
Hot air is exhausted from the exhaust vents.
When using or installing the projector, the
following precautions should be taken. 
– Do not put any flammable objects near these
vents.
– Keep front grills at...

9
Part Names and Functions
A built-in micro processor which controls this unit may occasionally
malfunction and need to be reset. This can be done by pressing the RESET
button with a pen, which will shut down and restart the unit.  Do not use the
RESET function excessively.
Rear Terminal
wAUDIO IN (Stereo)
Connect the audio output from computer or video
equipment connected to qor yto this jack.  (p15, 16)
tMONITOR OUT
This terminal outputs the signal coming from
COMPUTER / S-VIDEO / COMPONENT IN...

MENU INPUTVOLVOL
-
WARNING+
LAMP REPLACE
POWER
10
Part Names and Functions
Top Control
ewqytr
POWER indicator
Flash red until the projector gets ready to be turned 
on.  It turns red when the projector is in the stand-by  
mode.  It remains green while the projector is under
operation.  (p17, 18, 54)
qPOWER button 
Turn the projector on or off.  (p17, 18)r OK button
Execute the item selected.  It is also used to expand/ 
compress the image in Digital zoom +/–  mode.  (p31)
t MENU button
Open or close the...