Canon Lbp 5200 User Guide

 
viii 
Introduction 
Thank you for purchasing the Canon LBP5200. In order to fully understand the features of 
this product and thus be able to use it more effectively, please be sure to fully read this 
instruction manual before using the product. Store this manual in a safe place after reading 
it. 
How To Use This Manual 
Conventions 
The following symbols are used in this manual to explain procedures, restrictions, 
handling precautions, and instructions that should be observed for safety.
WARNING...

 
ix 
Screen Shots 
The screen shots shown in this manual may differ slightly from the screens on your 
computer depending on the operating system.
The locations of buttons that you need to press during a procedure are circled with 
a   as shown below.
When there is a choice of buttons that can be pressed during a procedure, all of the 
buttons are circled. Select the button that suits your needs. 
Abbreviations 
In this manual, product names and model names are abbreviated as follows: 
Microsoft 
®...

x
Legal Notices
Model Name
The following names may be provided for the safety regulations in each sales 
region of this Laser Beam Printer.110 - 127 V model: L10981A
220 - 240 V model: L10981E
FCC (Federal Communications Commission)
Laser Beam Printer, Model L10981A
■110 - 127 V model
This device complies with part 15 of the FCC Rules. Operation is subject to the following 
two conditions: (1) This device may not cause harmful interference, and (2) this device 
must accept any interference received,...

xi Do not make any changes or modifications to the equipment unless otherwise specified in 
the manual. If such changes or modifications should be made, you could be required to 
stop operation of the equipment.
Canon U.S.A. Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
Tel No. (516) 328-5600
EMC Directive (220 - 240 V model)
This equipment has been tested in a typical system to comply with the technical 
requirements of EMC Directive.
•Use of shielded cable is necessary to comply with the technical...

xii
This printer has been classified under IEC60825-1:1993, EN60825-1:1994 and 
conforms to the following classes:
CLASS 1 LASER PRODUCT
LASER KLASSE 1
APPAREIL A RAYONNEMENT LASER DE CLASSE 1
APPARECCHIO LASER DI CLASSE 1
PRODUCTO LASER DE CLASE 1
APARELHO A LASER DE CLASSE 1
(220 - 240 V model only)
CAUTION
Performance of procedures other than those specified in this guide may result 
in hazardous radiation exposure.
International Energy Star-Program
T rademarks
Canon, the Canon Logo, LASER SHOT, LBP,...

xiii
Copyright
Copyright 2005 by Canon Inc. All rights reserved.
No part of this publication may be reproduced or transmitted in any form or by any 
means, electronic or mechanical, including photocopying and recording, or by any 
information storage or retrieval system without the prior written permission of 
Canon Inc.
Disclaimers
The information in this manual is subject to change without notice.
CANON INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS 
MATERIAL, EITHER EXPRESS OR IMPLIED, EXCEPT...

xiv
Legal Limitations on the Usage of Your Product and the 
Use of Images
Using your product to scan, print or otherwise reproduce certain documents, and 
the use of such images as scanned, printed or otherwise reproduced by your 
product, may be prohibited by law and may result in criminal and/or civil liability. A 
non-exhaustive list of these documents is set forth below. This list is intended to be 
a guide only. If you are uncertain about the legality of using your product to scan, 
print or...

xv
  Important Safety Instructions
Before using this product, make sure you read this section (Important Safety 
Instructions) thoroughly, and that you use the product correctly. The purpose of the 
warnings and cautions contained in this section is to prevent injuries to the user and 
other people, and to prevent damage to property. Make sure you adhere to these 
warnings and cautions. Do not perform any actions that are not explicitly written in 
this manual.
Installation
WARNING
•Do not install the...

xvi
CAUTION
•Do not install the printer on an unsteady platform, an uneven surface, or any other 
unstable location, or any location subject to vibrations. If the printer falls down or the 
platform tips over, someone may be injured.
•Do not install this printer in a location where a wall or other object will block the 
ventilation slots in the printer. Do not install the printer on a bed, sofa, thick carpet, 
etc. If the ventilations slots are blocked, the internal printer components will 
overheat, and...

xvii
•Do not use any electrical cables other than the supplied cord. Doing so may cause 
fire or electrical shock.
•As a general rule, do not connect the printer using an extension cord or connect 
more than one appliance to a single power outlet. However, if there is no choice but to 
use an extension cord or connect multiple appliances to a single power outlet, it is 
the responsibility of the user to observe the following precautions. If these points are 
not followed correctly, a fire or electrical...