Canon Lbp 5000 User Guide

5-24Cleaning the Outside of the Printer
Routine Maintenance
5
Cleaning the Outside of the Printer
Periodically clean the outer surfaces and ventilation slots of the printer to maintain 
the optimal printing quality. When cleaning the printer, be careful of the following 
points in order to prevent an electrical shock or printer malfunctions.
WARNING
•When cleaning the printer, turn OFF the main power switch, and then unplug the 
power plug. Failure to observe these steps may result in a fire or electrical...

5-25
Routine Maintenance
5
Cleaning the Outside of the Printer
1Turn the printer and computer OFF     
aa a a
, remove the USB cable 
bb b b
, and then disconnect the power plug from the AC power 
outlet cc c c
.
2Firmly wring a soft cloth dampened with water or a mild 
detergent diluted with water, and wipe off the dirt.
If you use a mild detergent for cleaning, be sure to wipe away the detergent with 
a soft cloth dampened with water.
c
ba
a
 

5-26
Routine Maintenance
5
Cleaning the Outside of the Printer
3After wiping off the dirt, wipe the printer with a dry cloth.
4When the printer is completely dry, plug the power plug into 
the AC power outlet, and then connect the USB cable.
 

5-27Moving the Printer
Routine Maintenance
5
Moving the Printer
When changing the location of the printer or moving the printer for maintenance, be 
sure to perform the following procedure.
IMPORTANT
Make sure that the front cover and output tray are closed before carrying the printer.
NOTE
For details on the installation site, see Getting Started Guide.
1Turn the printer and computer OFF aa a a
, remove the USB cable 
bb b b
, and then disconnect the power plug from the AC power 
outlet cc c c
....

5-28
Routine Maintenance
5
Moving the Printer
2Remove all the interface cables and the power cord from the 
printer.
3Close the output tray.
4Pull out the paper cassette.
 

5-29
Routine Maintenance
5
Moving the Printer
5Remove the cassette protective cover.
Pressing the right side of the cassette protective cover a, remove it b.
6Move the printer unit from the installation site.
From the front side, securely hold the printer by the lift handles located on the 
lower portion of the printer with both hands.
b
a
 

5-30
Routine Maintenance
5
Moving the Printer
CAUTION
•• • •
This printer weighs approximately 17.1 kg without the paper cassette and 
cassette protective cover installed (Printer Unit: approx. 14.7 kg; Toner 
Cartridge x 4: approximately 2.4 kg). Please be careful not to hurt your 
back or other portions of your body when carrying the printer.
•• • •
Be sure not to hold the printer by the front panel, delivery slots, or any 
portions other than the lift handles. If you do so, you may drop the printer,...

5-31
Routine Maintenance
5
Moving the Printer
•• • •
The front portion of the printer (A) is relatively heavy. Be careful not to get 
off-balanced when lifting the printer. If you do so, you may drop the printer, 
resulting in personal injury.
•• • •
Be sure to hold the printer from the front side when carrying it. If you hold 
the printer from the rear side, you may get off-balanced and drop the 
printer, resulting in personal injury.
•• • •
Do not carry the printer with the paper cassette attached. If...

5-32
Routine Maintenance
5
Moving the Printer
•• • •
Do not carry the printer with the paper feeder installed. If you do so, the 
paper feeder may drop resulting in personal injury.
NOTE
If the optional paper feeder was previously installed in the printer, place the paper 
feeder on the new installation site before carrying the printer to the site. For details 
on the procedure for installing the paper feeder, see Installing the Paper Feeder, 
on p. 6-14.
7Put the printer down carefully at the new...

5-33
Routine Maintenance
5
Moving the Printer
8Install the cassette protective cover.
Install the left side of the cassette protective cover a on the printer, then while 
pressing the right side of the cover b, insert the cover into the back of the printer 
c as shown in the figure.
9Set the paper cassette in the printer.
Push the paper cassette into the printer firmly until the front side of the cassette is 
flush with the front surface of the printer.
b
a
c