Canon large format printer imagePROGRAF iPF6400 User Manual

CauseCorrective ActionThe type of paper specified in the printerdriver does not match the type loaded inthe printer.
1.
Press the Stop button and stop printing.
2.
Change the type of paper in the printer driver and try printing again.Depending on the type of paper, printedlines may be noticeably misaligned.Specify Proof in Print Priority in the printer driver. (See "Giving Priority to Particular Graphic Elements and Colors for Printing.")→P.61
Borders appear during borderless printing
Borders...

Cannot print over a network
Cannot print over a network
Cannot connect the printer to the network .............................................................................................................. 902
Cannot print over a TCP/IP network ............................................................................................................................ 902
Cannot print over a NetWare network...

CauseCorrective ActionThe NetWare server and servicesare not configured correctly.
2.
Make sure there is enough free disk space on the NetWare file server. Insufficient disk space mayprevent you from processing large print jobs.
3.
Start NWADMIN or PCONSOLE and confirm that the print service is configured correctly and the printqueue is available.
4.
If data transmission to a printer on another subnet fails, deactivate NCP burst mode in that printer'snetwork protocol settings.
5.
If the printer is...

Installation problems
Installation problems
Removing Installed Printer Drivers
Removing Installed Printer Drivers
Follow these steps to remove installed printer drivers and utilities.
Removing printer drivers (Windows)
Remove the printer driver as follows.
Note
•The following instructions are for Windows XP. The method of removing printer drivers varies depending on the version ofWindows.1
From the Windows  start menu, select  Programs > Canon Printer Uninstaller  > imagePROGRAF Printer
Driver...

1
From the Windows start menu, select  Programs > imagePROGRAF Device Setup Utility  > Uninstaller (im-
agePROGRAF Device Setup Utility)  to start the wizard.
2
In the wizard window, click Delete, and then click  Next.
3
Follow the instructions on the screen to remove imagePROGRAF Device Setup Utility.
iPF6400                                                                                                                                                                                     Removing...

Other problems
Other problems
The printer does not go on ............................................................................................................................................... 906
If the Printer Makes a Strange Sound ......................................................................................................................... 906
Messages advising to check the maintenance cartridge are not cleared .................................................... 906
The printer...

CauseCorrective ActionHead Cleaning B in the ControlPanel menu is executed frequently.Head Cleaning B in the Control Panel menu consumes a lot of ink. This does not indicate a problemwith the printer. Unless the printer has been moved or stored for a long period or you are troubleshoot-ing Printhead problems, we recommend not performing Head Cleaning B, to the extent possible.You have just finished initial installa-tion, when more ink is consumed tofill the system.After initial installation or at the...

3
 
A confirmation message is shown on the Display Screen about releasing
ink level detection. After checking the message, press the  ▶ button.
4
 
After checking the message, press the  ▶ button.
5
 
Press  ▲ or  ▼ to select  Yes, and then press the  OK button.
6
 
Check the message and press the  ▶ button.
7
 
Check the message and press the  ▶ button.
  
 
  
Ink Level Detection...

8
 
Press  ▲ or  ▼ to select  Yes, and then press the  OK button.
9
 
A confirmation message about updating ink information is shown on the
Display Screen. After checking the message, press the  ▶ button.
10
 
Press  ▲ or  ▼ to select  Yes, and then press the  OK button.
Ink level detection is now released.
 
 
 
iPF6400...

                                                                                                                                                                                                                                           iPF6400                                                                                                                                                                                                                                         User's Guide
 910