Canon large format printer imagePROGRAF iPF6400 User Manual

5
 
Fold an A4 sheet lengthwise four times and insert it through
the gap of the Back Cover. Push the scrap out toward the Platen.
6
Remove the scrap when it is pushed out onto the Platen.
7
If any scraps remain inside the paper feed slot, repeat steps 5 and 6.
8
Close the Top Cover.
9
Turn the printer off.   (See "Turning the Printer On and Off .")→P.21
Clearing Jammed Roll Paper
Clearing Jammed Roll Paper
If paper from a roll becomes jammed, "
Paper jam" is shown on the Display Screen of...

3
Remove the jammed paper.
•
If paper is jammed inside the Top Cover
→User's Guide (HTML)1.
 
Open the Top Cover and move the Carriage to
the side.
2.
Clear any jammed paper from inside the Top Cover. After removing the paper, make sure there are no other scraps of paper in the printer.
3.
 
Close the Top Cover.
 
 
Clearing Jammed Roll Paper...

Important•Do not move the Carriage over jammed paper. This may damage the Printhead.•Do not touch the Linear Scale (a) or Carriage Shaft (b).This may stain your hands and damage the printer. •
If paper from a roll is jammed by the Paper Feed Slot
→User's Guide (HTML)1.
Open the Roll Feed Unit Cover.
2.
 
Remove the jammed paper from the Paper
Feed Slot.
After removing the paper, make sure there are no other scraps of paper in the printer.
If paper is jammed deep in the Paper Feed
Slot, remove the...

•
If the paper is jammed by the Ejection Guide
Remove the jammed paper from the Output Tray.
After removing the paper, make sure there are no oth-
er scraps of paper in the printer.
4
 
Press the  OK button.
Clearing a Jammed Sheet, Fed Manually
Clearing a Jammed Sheet, Fed Manually
If a sheet you have fed manually becomes jammed, "
Paper jam" is shown on the Display Screen of the Control Panel.
Remove the jammed paper as follows.
1
 
Press the  OK button.
2
Remove the jammed paper.
•
If paper is...

1.
 
Open the Top Cover and manually move the
Carriage to the side.
2.
Clear any jammed paper from inside the Top Cover. After removing the paper, make sure there are no other scraps of paper in the printer.
3.
 
Close the Top Cover.
 
 
iPF6400                                                                                                                                                                           Clearing a Jammed Sheet, Fed ManuallyUser's Guide...

Important•Do not move the Carriage over jammed paper. This may damage the Printhead.•Do not touch the Linear Scale (a) or Carriage Shaft (b).This may stain your hands and damage the printer. •
If the paper is jammed by the Paper Feed Slot of the Top Paper Feed Slot
Remove the jammed paper from the Paper Feed
Slot.
After removing the paper, make sure there are no
other scraps of paper in the printer.
If paper is jammed deep in the Paper Feed Slot, remove the roll feed unit, and then clear the paper
jam....

•
If the paper is jammed by the Ejection Guide
Remove the jammed paper from the Output Tray.
After removing the paper, make sure there are no oth-
er scraps of paper in the printer.
•
If paper is jammed in the back of the printer
Remove the jammed paper from the back of the print-
er.
After removing the paper, make sure there are no oth-
er scraps of paper in the printer.
3
 
Press the  OK button.
Roll paper cannot be inserted into the paper feed slot
Roll paper cannot be inserted into the paper feed...

CauseCorrective ActionPaper rises by the ends of the cut position before it iscut.Reload the paper correctly.You are using paper that cannot be cut with the CutterUnit.Specify Manual in Cutting Mode in the Control Panel menu and use scissors or acutting tool to cut the roll after printing. (See "Specifying the Cutting Method for Rolls.")→P.544Cut Speed is not configured correctly in the ControlPanel menu.Change the Cut Speed setting in the Control Panel menu. (See "Menu...

Printing does not start
Printing does not start
The Data lamp on the Control Panel does not light up ........................................................................................ 889
The printer does not respond even if print jobs are sent ................................................................................... 889
Ink Filling.. is displayed...

The printer stops during a print job
The printer stops during a print job
An error message is shown on the Display Screen ............................................................................................... 890
The printer ejects blank, unprinted paper .................................................................................................................. 890
An error message is shown on the Display Screen
An error message is shown on the Display Screen
CauseCorrective ActionAn error...