Canon large format printer imagePROGRAF iPF6400 User Manual

4
Press ▲ or  ▼ to select " Yes", and then press the  OK button.
The paper is ejected from the front of the printer.
Important•If the trailing edge of a sheet is not ejected, pull the sheet out, keeping the front edge level. Accidentally removingthe sheet at an angle may scratch the printed surface.
Removing heavyweight sheets from the front paper feed slot
1
 
On the  Tab Selection screen  of the Control Panel, press  ◀ or  ▶ to se-
lect the Paper tab (
).
Note
•If the Tab Selection screen is...

8
 
Lift the four Front Tray Guides above the Ejection Guide,
store them toward the front, and then press the  OK button.
 
Removing Sheets                                                                                                                                                                                                               iPF6400...

Output Stacker
Output Stacker
Output Stacker Precautions ............................................................................................................................................. 563
Using the Output Stacker .................................................................................................................................................. 564
Output Stacker Precautions
Output Stacker Precautions
Documents can be stored in the Output Stacker after printing from rolls.
To...

Using the Output Stacker
Using the Output Stacker
This topic describes how to use the Output Stacker.
Use the Output Stacker in position (1) when storing printed documents.
When the Output Stacker is not used, fold the stacker to stow it in position (2).
Important•The Output Stacker can hold paper up to 36 inches (914.4 mm) long.•The number of sheets that can fit in the Output Stacker is one sheet. When printing multiple pages, remove each sheet afterit is printed.•Before printing banners or other long...

For information on types of paper you can use with the stacker in extended position, refer to the Paper Reference
Guide.   (See "Types of Paper .")
→P.524
iPF6400                                                                                                                                                                                                  Using the Output StackerUser's Guide...

Media Configuration Tool (Windows)
Media Configuration Tool (Windows)
The Features of Media Configuration Tool ................................................................................................................ 566
Installation Procedures ....................................................................................................................................................... 567
Starting Method...

Installation Procedures
Installation Procedures
The Media Configuration Tool installation screen appears when you start the installation of a new version of the Media
Configuration Tool. The installation procedure started from this screen is described below.
Important•If the printer driver is installed from the User Software CD-ROM, the Media Configuration Tool is also installed and the mediainformation is also configured. Therefore, the following procedure does not normally need to be performed. To...

3
 
The  License Agreement  is displayed.
Select  I accept the terms of the license agreement
and click the  Next button.
4
 
The  Choose Destination Location  screen appears.
Select the destination folder then click the  Next button.
5
 
The  Ready to Install the Program  screen appears.
Click the  Install button.
   
Installation Procedures (Windows)...

6
 
All the required files are copied to your computer and
InstallShield Wizard Complete  screen appears.
Click the  Finish button.
 
This completes the installation of Media Configuration
Tool.
Starting Method
Starting Method
Follow the procedure below to start Media Configuration Tool.
From the  start menu go to  All Programs  > iPFxxxx Media Configuration Tool  > iPFxxxx Media Configuration
Tool .
Media Configuration Tool main window is displayed.
Media Configuration Tool Main Window
Media...

•
Add Genuine Paper button
When this button is clicked, the  Edit Media Types dialog box is displayed, which allows you to add media informa-
tion files released by Canon to the printer control panel and printer driver. You can also change names, toggle
between displaying and hiding, and delete added media types.
You can also change the display order of Canon genuine paper and custom paper.
Refer to  Editing Media Type Information for Genuine Paper and Feed Confirmed Paper
→P.570 for details on  Add...