Canon large format printer imagePROGRAF iPF6400 User Manual

•
Specify the Range of Images button
When this button is clicked, the  Specify the Range of Images dialog box is displayed for specifying the range of
images.
When you specify the range by using the mouse or other means and then click the  OK button, the  Specify the
Range of Images  dialog box closes and the specified image range is redisplayed as the adjustment pattern.
If you click the  Cancel button, the  Specify the Range of Images  dialog box closes even if a range is selected.
Note
•The selected...

Each of the setting values for the paper type, print mode, and output profile as well as the adjustment values con-
figured in the  Color Settings  sheet (color or monochrome) are printed at the bottom of the paper. However, the
adjustment values for the  Curves are not printed.
Note
•The job name when printing the adjustment pattern is "Original Image Name + Pattern-Print". For example, the print jobname for the image "ABC.jpg" is "ABC_Pattern-Print.jpg".•
Maximize Dialog Box...

SettingDetailsDisregard ValueThe calibration results are not used for printing. Select this option to avoid changes to image colortones during printing due to color calibration.•
Mirror
Specify whether to print a mirror image, as needed. Select this option to print a version of the document or image
with the left and right sides inverted.
 
•
Unidirectional Printing
Select this checkbox to prevent problems such as misaligned lines and improve the print quality. However, the
printing speed becomes...

Note
•If printing does not finish correctly because it was canceled or an error occurred, the plug-in does not close.•
Initialize all warning dialog boxes
When this is checked, all of the warning dialog boxes that have been set to "Do not show this screen again" be-
come displayed.
 
ICC Conversion Options dialog box
ICC Conversion Options dialog box
This is displayed when an ICC profile is selected in the 
Output Profile list in the Main sheet and the  ICC Conversion
Options  button is clicked....

Roll Paper Options Dialog Box
Roll Paper Options Dialog Box
This dialog box appears when you click the 
Roll Paper Options button on the Page Setup Sheet. You can set the roll
paper width and perform the auto cut settings.
•
Roll Paper Width
This selects the width of the roll media set to the printer.  
•
Automatic Cutting
You can set the printer to cut roll paper automatically or print a guideline for cutting.
The following settings are available for automatic cutting.
SettingDetailsAvailableEach page...

•
Paper Size
Width
Enter the width of the media size.
 
Height
Enter the height of the media size.
•
Add  button
Click the button to register the contents of the settings.
 
Curves Dialog Box
Curves Dialog Box
This dialog box appears when you click the 
Curves button on the  Color Settings  Sheet. You can set  Channel and
other settings.
•
Channel
Select from among  RGB, Red , Green , or Blue .
Note
•Gray is displayed for monochrome printing and this selection cannot be changed.•
Input
Enter an input...

Note
•The allowed entry range is 0 to 255.•
Load Curves button
Click the button to load stored data for a tone curve.
 
•
Save Curves  button
Click the button to stores the current tone curve settings.
 
Print History Details Dialog Box
Print History Details Dialog Box
This dialog box appears when you click the 
Details button on the  Print History Sheet. This controls print history. For
more information about  Print History Details, see " Utilize Print History ."
→P.506
•
Print History
Print...

•
Favorites
The print history stored in print preferences displays in list format.Note
•You can change the order by selecting an item and dragging it to another place.•
Import button
Click the button to import print history saved as a file.
 
•
Export  button
Click the button to save print history as a file that is stored in print preferences.
 
•
Delete  button
Click the button to delete print history stored in print preferences.
 
•
Settings
Displays the print history settings selected from the  Print...

Note
•When the cursor on the preview is displayed as  on the preview, you can specify the print position by dragging the image.•When the cursor is displayed as  on the preview, the below conditions on the Page Setup sheet have all been met.•There is no checkmark in Borderless Printing.•There is no checkmark in Enlarged/Reduced Printing or Scaling has been selected.
Check the original image with Image
Check the original image with Image
In the image preview you can check the entire image that you have...

Print with a Desired Picture Quality
Print with a Desired Picture Quality
You can specify and print at the resolution you desire.
1
 
Display the  Main sheet.
2
Select the media set to the printer in  Media Type.
Note
•Always select media type that is actually set in the printer. When the media you chose is different from the media setin the printer, you may not receive the desired print results.3
Choose either  Accuracy 300ppi  or High Accuracy 600ppi  for the resolution to process images in  Input...