Canon large format printer imagePROGRAF iPF6400 User Manual

Note
•Auto (Monochrome Photo) can only be selected for the corresponding media types.•
Proof
This is displayed when an ICC profile is selected as the Output Profile.
When this is checked, you can perform printing press simulation prints. Refer to  Perform Printing Press Simulation Print
→P.501 for details on printing press simulation prints.
•
Matching Method
You can select the processing method when performing color conversion.
The following settings are available for the matching method....

Page Setup Sheet
Page Setup Sheet
You can use this sheet to set the size of the image to be printed, the media size, and whether to enlarge/reduce the
image.
•
Input Image Size
The size of the image imported to Print Plug-In is displayed.
 
•
Borderless Printing
When you place a checkmark here, the  Specify Roll Paper Width dialog box is displayed and you can print an
image without borders.
For more information about  Borderless Printing, see " Print with No Borders ."
→P.505
Note
•Available only...

Note
•When Paper Size is smaller than Output Image Size, part of the image may not print.•
Paper Size
You can select the size of the print media.
Note
•This is not displayed when a checkmark is placed in Borderless Printing.•This is not displayed when Fit Roll Paper Width is set in Enlarged/Reduced Printing.•
Orientation
This selects the print orientation.
The following settings are available for orientation.
SettingDetailsPortraitPrints the image on the media as it appears on the screen.LandscapePrints...

SettingDetailsManual (3mm margins)Select for manual paper feed printing when you want to minimize the margin at the far end edgeof paper.Roll PaperSelect to print on roll paper.
Note
•When you select Manual (3mm margins) for Paper Source, the far end edge of printed image may become defectivedepending on the paper used. If this happens, select another media source.•
Roll Paper Options button
Click this button to open the  Roll Paper Options dialog box, where you can set roll paper width and perform auto...

•
Brightness
You can adjust the brightness of the printed image without losing the brightest and darkest areas by either input-
ting a numerical value or dragging the slide bar.
•
Contrast
You can relatively adjust the brightness of the brightest and darkness areas by either inputting a numerical value
or dragging the slide bar.
•
Saturation
You can adjust the saturation of vivid color balance to dark color balance by either inputting a numerical value or dragging the slide bar.
•
Adjustment pattern...

You can click the arrows by the X (horizontal) and  Y (vertical) boxes or enter the values directly.•
Tone
You can adjust the brightness of intermediate tones in an image. Selecting  Hard tone gives a hard impression
with more definition. Selecting  Soft tone gives a soft impression.
•
Brightness
You can adjust the brightness of the printed image without losing the brightest and darkest areas by either input-
ting a numerical value or dragging the slide bar.
•
Contrast
You can relatively adjust the...

Select Restore Defaults  and click the Apply button to restore all settings to their initial settings.
Note
•You can check the 3 print preferences in the preview display.•
Apply button
When you click the button, the print setting content applies to the current image selected with  Print History and
Favorites .
 
•
Details  button
Click the Details button to open the  Print History Details dialog box, where you can manage print history.
For more information about the print history details,  see "Print...

•
Support Information button
Click the button to display websites that contain the latest product information.Note
•An Internet connection is needed to view the websites.•
User Manual button
Click the button to display the printer manuals installed on the computer.
Note
•You must have User Manual installed on your computer.•
About button
Click the button to open the version information window of the Print Plug-In. Click the  OK button in the version
information window to return to the Print Plug-In...

•
Paper Source
Selects the paper feed method for the paper to print the adjustment pattern on. You can split the usage betweenprinting adjustment patterns on cut paper (manual feed) and printing work pieces on roll paper.
•
Use Paper Size
Selects the paper size to print the adjustment pattern on.
The adjustment pattern is printed so that it fits into the selected paper size.
Note
•If the image size is large and Dimensions is selected in Pattern Size, the pattern display might not fit within the...

When None is selected, the image is not rotated.•
Pattern Size
You can specify the size of the image when printing the adjustment pattern.
When  Auto is selected, the image is enlarged or reduced to fit the adjustment pattern into the  Use Paper Size.
When  Dimensions  is selected, the image is printed at the input image size without enlarging or reducing.  Dimen-
sions  cannot be selected when the paper feed method is  Manual.
Note
•If the input image size is large, check the Paper Size before starting...