Canon large format printer imagePROGRAF iPF6400 User Manual

SettingDetailsAdobe RGBUses wide color space. Use this setting to print images created with Adobe RGB color space.
ICC Matching Mode
ICC Matching Mode
1
 
Under  Matching Mode , select ICC Matching Mode .
2
Click the Matching Method  list, and then select a setting.
SettingDetailsPerceptualColor-matching optimized for printing typical photos attractively. Smooth gradation is a feature.This is also an easy-to-use mode when performing color adjustment using application software.SaturationColor-matching...

4
Click the Printer Profile  list and select a printer profile.
ColorSync
ColorSync
1
 
Check that  ColorSync is selected in  Matching Mode .
2
Place a checkmark on  Soft Proof to simulate the output product in Layout Area.
 
ColorSync (Mac OS X)                                                                                                                                                                                                        iPF6400...

Preferences Dialog Box
Preferences Dialog Box
This dialog box appears when you select 
Preferences from the imagePROGRAF Advanced Preview menu. You can
set the preferences for Free Layout.
•
Units
Set the unit for paper length, margins, and so on.
•
Gridlines
You can input a grid line width value in numerical characters so that they serve as a guide to laying out objects.
Note
•You can input between 10.0 and 200.0(mm) (between 0.39 and 7.87(inch)).•You can change the numbers by clicking either ▲ button...

•
Auto Arrange Spacing
Change the object-to-object spacing to be applied in the operation of laying out objects automatically.Note
•You can input between 0.0 and 100.0(mm) (between 0.00 and 3.94(inch)).•You can change the numbers by clicking either ▲ button or ▼ button.
Page Setup Dialog Box
Page Setup Dialog Box
This dialog box appears when you select 
Page Setup from the File menu.This dialog box provides selections for set-
ting the media size, orientation and other important features.
•
Paper...

Note
•When you have selected Roll Paper Length > Auto Settings and Paper Orientation > Vertical, you can choose onlyUpper Left to Right.•When you have selected Roll Paper Length > Auto Settings and Paper Orientation > Horizontal, you can chooseonly Upper Left to Bottom.•
Paper Size
You can select the size of the print media.
Note
•You cannot display this if Roll Paper is selected in Paper Source.
Zoom Dialog Box
Zoom Dialog Box
This dialog box appears when you select 
Zoom from the  View menu. You can...

•
Rotate
When you place a checkmark here, you can select Rotate Right or Rotate Left .
SettingDetailsRotate RightRotates the object 90 degrees clockwise.Rotate LeftRotates the object 90 degrees counterclockwise.
Note
•When several objects are selected, you cannot select Rotate.•
Scaling
You can input the value for enlargement or reduction of the obeject in numerical characters.
Note
•You can input between 25 and 400.•You can change the numbers by clicking either ▲ button or ▼ button.•
Object Size
You can...

Selecting an Object
Selecting an Object
When an object is selected, a select box (blue border) appears around the object.Note
•To select an object, click that object.•To select multiple successive objects, click them while holding down the shift key.•To select multiple arbitrary objects, click them while holding down the command key.•To select all objects, select Select All from the Edit menu.
Changing the Object Size
Changing the Object Size
You can change the object size by means of mouse operation or...

Resizing by specifying a scaling value
1
Select an object.
2
Open the Format Dialog Box→P.435.
3
Use Scaling  to set the magnification for enlargement or reduction. You either enter numbers directly.
Note
•You can input between 25 and 400.•You can change the numbers by clicking either ▲ button or ▼ button.4
Click the  OK button.
Moving an Object
Moving an Object
You can move the object position.
1
Select an object.
2
 
Place the pointer inside the selection box of the object
to show the crosshair handle,...

Laying out Objects Automatically
Laying out Objects Automatically
Click 
Auto Arrange  in the tool bar. This automatically lays out objects. Alternatively, you may select  Auto Arrange
Object  from the  Object menu.Note
•The object layout order varies depending on the Order setting on the Page Setup Dialog Box→P.434.
Aligning Objects
Aligning Objects
You can align objects systematically.
1
Select multiple objects.
2
Select the align menu from the 
Object menu.
•
Align Top
Lays out the objects, justifying...

•
Center Vertically
Lays out the objects, justifying them to the vertical
center.
•
Align Bottom
Lays out the objects, justifying them to the bottom.
•
Align Left
Lays out the objects, justifying them to the left.
•
Center Horizontally
Lays out the objects, justifying them to the horizon-
tal center.
    
Aligning Objects (Mac OS X)...