Canon large format printer imagePROGRAF iPF6400 User Manual

For detailed instructions on printing with watermarks, refer to the following topics:•
Printing with Watermarks— COPY, FILE COPY, and so on (Windows)→P.161
Printing with Watermarks— COPY, FILE COPY, and so on (Windows)
Printing with Watermarks— COPY, FILE COPY, and so on (Windows)
This topic describes how to print with watermarks, based on the following example of printing with a 
FILE COPY water-
mark.
•
Document: Any type
•
Page size: A2 (420.0×594.0 mm [16.5 × 23.4 in])
•
Paper: Roll paper
•
Paper...

6
 
Click the  Page Setup  tab to display the  Page Setup
sheet.
7
In  APage Size , click the size of the original as specified in the application software. In this case, click  ISO A2.
8
Select and click a roll paper in the  LPaper Source  list.
9
Select the width of the loaded roll in the  MRoll Paper Width  list—in this case,  ISO A2/A3 Roll (420.0mm) .
10
 
Click the  Layout tab to display the  Layout sheet.
11
Select the  CWatermark  check box.
12
Click FILE COPY  in the Watermarks  list.
Note...

Making the Original Orientation Match the Paper Orientation
Making the Original Orientation Match the Paper Orientation
You can specify the original orientation to match the orientation of the paper for printing.
•
Orientation
Paper is usually loaded in the printer in portrait orientation. When you have an original in landscape orientation,
you can specify the printing orientation so that the original is printed in landscape orientation.
•
Rotate 180 degrees
The original is rotated 180 degrees to print...

3
 
Make sure the  Main sheet is displayed.
4
In the  AMedia Type  list, select the type of paper that is loaded. In this case, click  Plain Paper.
5
Make your selection in the  EPrint Target  list.
6
Make your selection in the  FPrint Quality  list.
7
 
Click the  Page Setup  tab to display the  Page Setup
sheet.
8
In the  APage Size  list, click the size of the original as specified in the application. In this case, click  ISO A4 or
Letter (8.5"x11") .
9
In HOrientation , click JLandscape .
10...

12
Confirm the print settings and print as desired.Note
•For tips on confirming print settings, see "Confirming Print Settings →P.178"
Making the Original Orientation Match the Paper Orientation (Mac OS X)
Making the Original Orientation Match the Paper Orientation (Mac OS X)
This topic describes how to print an original in landscape orientation after matching the paper orientation, based on the
following example.
•
Document: An original in landscape orientation
•
Page size: A4 (210.0 × 297.0 mm...

6
 
Access the  Main pane.
7
In the  AMedia Type  list, select the type of paper that is loaded. In this case, click  Plain Paper.
8
Make your selection in the  EPrint Target  list.
9
Make your selection in the  FPrint Quality  list.
10
 
Access the  Page Setup  pane.
11
Select and click a roll paper in the  APaper Source  list.
  
Making the Original Orientation Match the Paper Orientation (Mac OS X)...

12
Make sure the width of the loaded roll is displayed in the BRoll Width  list—in this case,  ISO A2/A3
(420.0mm) .Note
•If the width of the roll loaded in the printer is not shown inBRoll Width, click LPrinter Information on the Mainpane to update the printer information. 13
 
Make sure the  CPage Size  setting matches the origi-
nal size as selected in  CPaper Size  in the Page At-
tributes  dialog box—in this case,  ISO A4.
14
Confirm the print settings, and then click  MPrint  to start printing....

Cutting Roll Paper After Printing
Cutting Roll Paper After Printing
Roll paper can be automatically cut after printing.Note
•It may not be possible to cut certain types of paper, such as adhesive paper. For details on types of paper that cannot be usedwith the auto cut feature, see the Paper Reference Guide. (See "Types of Paper→P.524")•
Automatic Cutting
Roll paper is cut automatically after printing. If you prefer, you can print continuously without cutting the roll, or you
can print a cut...

5
 
Click  NRoll Paper Options  to display the Roll Paper
Options  dialog box.
6
To enable automatic cutting, click  Yes in the  AAutomatic Cutting  list. If you prefer to cut the paper later your-
self, click  Print Cut Guideline .
7
Click OK to close the  Roll Paper Options  dialog box.
8
Confirm the print settings and print as desired.
Note
•For tips on confirming print settings, see "Confirming Print Settings →P.178"
Roll paper will be automatically cut after printing.
Cutting Roll Paper...

2
Select the printer in the APrinter  list.
3
Choose the original size in the  FPaper Size  list.
4
If you configured the settings using the  Page Attributes dialog box, click  FOK  to close the dialog box, and
then select  Print from the application software menu.
5
 
Access the  Page Setup  pane.
6
Select and click a roll paper in the  APaper Source  list.
7
 
Access the  Main pane.
8
In the  AMedia Type  list, select the type of paper that is loaded.
  
Cutting Roll Paper After Printing (Mac OS X)...