Canon large format printer imagePROGRAF iPF6400 User Manual

7
Under Paper Size , enter 100 in Width  and 500 in Height .
8
Click Add to add the paper size of  My Horizontal Banner.
9
Click OK to close the  Paper Size Options  dialog box.
10
Close the printer driver dialog box.
Note
•Although you can even set Custom Size for the paper size, the maximum settable size is 3.2 m. The setting of Custom Sizeis disabled when you exit the application software.For more information, see "Printing on Non-Standard Paper Sizes →P.117"
Creating the banner in the...

3
 
Make sure the  Main sheet is displayed.
4
In the  AMedia Type  list, select the type of paper that is loaded. In this case, click  Plain Paper.
5
After confirming that  DEasy Settings  is selected, click  Poster in the  EPrint Target  list.
6
 
Click the  Page Setup  tab to display the  Page Setup
sheet.
7
In the  APage Size  list, click the size you registered,  My Horizontal Banner.
  
Printing Vertical or Horizontal Banners (Large-Format Printing; Windows)...

8
Select the CEnlarged/Reduced Printing  check box.Note
•If the CEnlarged/Reduced Printing check box is not dis-played on the Page Setup sheet, clear the BBorderlessPrinting check box. 9
Select and click a roll paper in the 
LPaper Source  list.
10
After you click  EFit Roll Paper Width , the Information  dialog box is displayed.
11
Select the width of the loaded roll in the  Roll Paper Width list. In this case, click  16-in. Roll (406.4mm) , and
then click  OK.
12
Confirm the print settings and print as...

2
 
In the  FineZoom Settings  list, click Yes.
Printing Vertical or Horizontal Banners (Large-Format Printing; Mac OS X)
Printing Vertical or Horizontal Banners (Large-Format Printing; Mac OS X)
By automatic enlargement of a document created with an application software by the printer driver, you can print maxi-
mum 18.0 m vertical or horizontal banners.
This topic describes how to print a banner about five times as long as the roll width based on the following example.
•
Document: An original designed...

3
Select the printer in the APrinter  list.
4
 
Click  Manage Custom Sizes  in the FPaper Size  list to
display the  Custom Page Sizes  dialog box.
5
Double-click Untitled in the list at left, and then enter a name for the page size you want to register. Here, en-
ter  100*500 .
If the  Untitled  size is not listed at left, click  + below the list.
6
Under  Page Size , enter 10 in  Width  and 50 in  Height . Here, measurements are entered in centimeters.
7
Specify the margins by entering  0.3 in Printer...

2
 
Access the  Main pane.
3
In the  AMedia Type  list, select the type of paper that is loaded. In this case, click  Plain Paper.
4
Make your selection in the  EPrint Target  list.
5
Make your selection in the  FPrint Quality  list.
6
 
Access the  Page Setup  pane.
7
Select and click a roll paper in the  APaper Source  list.
  
Printing Vertical or Horizontal Banners (Large-Format Printing; Mac OS X)...

8
Make sure the width of the loaded roll is displayed in the BRoll Width  list—in this case,  16 in. (406.4mm).Note
•If the width of the loaded roll is not displayed in BRollWidth, click LPrinter Information on the Main pane andupdate the printer information. 9
In 
CPage Size , make sure  100*500 is displayed, as registered in  Page Setup.
10
Select the DEnlarged/Reduced Printing  check box.
11
Click FFit Roll Paper Width .
12
Confirm the print settings, and click  MPrint  to start printing.
Note
•For...

Registering and Printing With a Custom Paper Size
This topic describes how to register a non-standard paper size by the name of  430 mm Squareand print based on the
following example.
•
Document: Any Type
•
Page Size: A square sheet (430 × 430 mm [16.9 × 16.9 in])
•
Paper: Sheets
•
Media Type: Any type
•
Paper Size: A square sheet (430 × 430 mm [16.9 × 16.9 in])
1
Load the square paper (430 × 430 mm [16.9 × 16.9 in]) in the printer.
2
Choose  Print in the application menu.
3
Select the printer in the...

7
 
Click the  Page Setup  tab to display the  Page Setup
sheet.
8
Click  OSize Options  to display the  Paper Size Options  dialog box.
9
Enter a desired paper name in  Custom Paper Size Name. 430 mm Square  is used in this example.
10
Select mm in Units .
11
Enter  430 (16.9 in) in both  Width and Height .
Note
•If you select the Fix the Ratio of the Width to Height check box, after you enter a value in either Width or Height,the other value will be automatically applied based on the original aspect...

•Document: Any Type•
Page Size: A square sheet (430 × 430 mm [16.9 × 16.9 in])
•
Paper: Sheets
•
Media Type: Any type
•
Paper Size: A square sheet (430 × 430 mm [16.9 × 16.9 in])
Note
•The following procedures are based on Mac OS X v10.5. The method of setting up non-standard paper sizes varies depend-ing on the version of Mac OS X.1
Create the document in the application.
2
Load the square paper (430 × 430 mm [16.9 × 16.9 in]) in the printer.
3
 
Choose  Print in the application menu.
4
Select the...