Canon large format printer imagePROGRAF iPF6400 User Manual

5
 
Access the  Main pane.
6
In the  AMedia Type  list, select the type of paper that is loaded. In this case, click  Plain Paper.
7
Make your selection in the  EPrint Target  list.
8
Make your selection in the  FPrint Quality  list.
9
 
Access the  Page Setup  pane.
10
Select and click a roll paper in the  APaper Source  list.
  
iPF6400                                                                                                                                                      Resizing Originals...

11
Make sure the width of the loaded roll is displayed in the BRoll Width  list—in this case,  ISO A2/A3
(420.0mm) .Note
•If the width of the roll loaded in the printer is not shown inBRoll Width, click LPrinter Information on the Mainpane to update the printer information. 12
 
Make sure  CPage Size  on the Page Setup  pane
shows the original size as specified in  CPaper Size  in
the  Page Attributes  dialog box—in this case,  ISO A4.
13
Select the  DEnlarged/Reduced Printing  check box.
14
Make sure...

•
Fit Roll Paper Width
Enlarge or reduce the original as a whole to match the roll paper width, as desired.
For instructions on resizing originals to match the roll paper width, refer to the following topics, as appropriate for
your computer and operating system.
•
Resizing Originals to Fit the Roll Width (Windows)→P.73
•
Resizing Originals to Fit the Roll Width (Mac OS X)→P.75
Note
•For better printing results when enlarging photos from a digital camera in TIFF or JPEG format, use an...

3
 
Make sure the  Main sheet is displayed.
4
In the  AMedia Type  list, select the type of paper that is loaded. In this case, click  Plain Paper.
5
Select the printing application in the  EPrint Target  list.
6
 
Click the  Page Setup  tab to display the  Page Setup
sheet.
7
Select and click a roll paper in the  LPaper Source  list.
8
In the APage Size  list, click the size of the original as specified in the application. In this case, click  ISO A4 or
Letter (8.5"x11") .
  
Resizing Originals...

9
Select the CEnlarged/Reduced Printing  check box.Note
•If the CEnlarged/Reduced Printing check box is not dis-played on the Page Setup sheet, clear the BBorderlessPrinting check box. 10
Click 
EFit Roll Paper Width .
Note
•After you click EFit Roll Paper Width, the Information dialog box is displayed. Select the width of the loaded roll inthe Roll Paper Width list and click OK.•Make sure the roll paper width you specify matches the width of the loaded roll.11
Confirm the print settings and print as...

1
This sets the BFormat for  and CPaper Size .Note
•The configuration method varies depending on the OS andapplication software you are using.If Page Setup is displayed in the application menu, the set-tings are configured by opening the Page Attributes dialogbox from Page Setup.If it is not displayed, the settings are configured in the up-per part of the printer driver displayed when you selectPrint from the application software menu.  2
Select the printer in the  APrinter  list.
3
In the FPaper Size...

9
 
Access the  Page Setup  pane.
10
Select and click a roll paper in the  APaper Source  list.
11
Make sure the width of the loaded roll is displayed in the  BRoll Width  list—in this case,  16 in. (406.4mm).
Note
•If the width of the roll loaded in the printer is not shown in BRoll Width, click LPrinter Information on the Mainpane to update the printer information.12
 
Make sure the  CPage Size  setting matches the origi-
nal size as selected in  CPaper Size  in the Page At-
tributes  dialog box—in...

Resizing Originals by Entering a Scaling Value
Resizing Originals by Entering a Scaling Value
You can freely adjust the size of originals by enlarging or reducing them as desired.
•
Enlarged/Reduced Printing
Enlarge or reduce the original in the printer driver, as desired.
•
Scaling
Enlarge or reduce originals by a particular amount, as desired.
For instructions on entering a scaling value to resize originals, refer to the following topics, as appropriate for your
computer and operating system.
•...

3
 
Make sure the  Main sheet is displayed.
4
In the  AMedia Type  list, select the type of paper that is loaded. In this case, click  Plain Paper.
5
Select the printing application in the  EPrint Target  list.
6
 
Click the  Page Setup  tab to display the  Page Setup
sheet.
7
Select and click a roll paper in the  LPaper Source  list.
8
Select the width of the loaded roll in the  MRoll Paper Width  list—in this case,  ISO A2/A3 Roll (420.0mm) .
9
In the APage Size  list, click the size of the original as...

12
Click FScaling  and enter  120.Note
•You can specify enlargement that exceeds the paper size, but in this case, the portions off the bottom and rightedges of the paper will not be printed.•If the original size after enlargement or reduction is smallerthan the paper size, the original is printed in the upper-leftcorner. In this case, you can center originals by selectingEPrint Centered on the Layout sheet. 13
Confirm the print settings and print as desired.
Note
•For tips on confirming print settings,...