Canon large format printer imagePROGRAF iPF6400 User Manual

9
Click OK to close the  Add dialog box.
The favorite you have added is now displayed in  AFavorites .Note
•To save a favorite as a file, click JExport and specify the file to save.
Printing using the favorite
Follow the steps below to print using the favorite you have registered.
1
Choose  Print in the application menu.
2
Select the printer in the dialog box, and then display the printer driver dialog box.(See " Accessing the Printer
Driver Dialog Box from Applications 
→P.181 ")
3
 
Click the...

2
Select the printer, and then display the printer driver dialog box.Note
•The dialog box for specifying printing conditions varies depending on the source application. In some cases, whenyou select the printer, a sheet for configuring the printer driver is added to the dialog box.In the following case, click Preferences.•
Example: Print dialog box displayed by the application software
Six sheets of print settings are displayed by the printer
driver:  Main, Page Setup , Layout , Favorites , Utility ,
and...

Accessing the Printer Driver Dialog Box from the Operating System Menu
Accessing the Printer Driver Dialog Box from the Operating System Menu
1
Click 
start > Printers and Faxes  (or Printers  ).
2
 
Select the printer, and then display the printer proper-
ties dialog box.
3
 
Click  Printing Preferences  to display the Main(or
Printing Preferences ) dialog box, titled with the name
of this printer.
Note
•The Device Settings sheet is also an extension of the printer driver.(See "Device Settings Sheet...

Six sheets of print settings are displayed by the printer
driver:  Main, Page Setup , Layout , Favorites , Utility ,
and  Support .
Important•If you access the printer driver dialog box from the operating system menu, changes you make to the settings will apply to allapplications you use for printing.•You can also access the printer driver dialog box from applications.See "Accessing the Printer Driver Dialog Box from Applications →P.181".
Main Sheet
Main Sheet
The following settings are available...

•BGet Information
Displays  Paper Information on Printer . You can update the printer driver settings for the feed source, media
type, and roll width by selecting the feed source.
•
Paper Information on Printer Dialog Box →P.187
•
C Advanced Settings
Displays  Paper Detailed Settings . You can configure the printing settings to match the type of media, such as the
ink drying time.
•
Paper Detailed Settings Dialog Box →P.187
•
L Open Preview When Print Job Starts
If you turn this on,  imagePROGRAF Preview...

•FPrint Quality
Choose the level of print quality.
•
Giving Priority to Particular Graphic Elements and Colors for Printing→P.61
•
G View Settings
Displays the  EPrint Target  setting values.
You can view and change the order of  EPrint Target  setting values.
•
View Settings Dialog Box for the Printing Application →P.189
Configuration using  Advanced Settings
•
EPrint Priority
Choose the graphic elements that you want to emphasize for printing.
•
Giving Priority to Particular Graphic Elements and Colors...

•JUnidirectional Printing
Select this checkbox to prevent problems such as misaligned lines and improve the print quality. However, the
printing speed becomes slower.
Paper Information on Printer Dialog Box
Paper Information on Printer Dialog Box
On the 
Paper Information on Printer  dialog box, you can obtain information on the paper in the printer and configure
printer driver settings for the paper source and media type.
Note
•To display the Paper Information on Printer dialog box, on the Main sheet,...

ADrying Time
Specify the time that the printer waits for ink to dry, as needed. The  Between Pages setting is only valid for rolls.
•
BBetween Pages
You can set the time to wait after printing 1 document page until ejecting the paper. Since waiting time is required
for ink to dry before a roll is cut, you can deliver paper in the Output Stacker with the ink dried even if  Cutting
Mode  is set to  Automatic .
Setting ItemDetailsPrinter DefaultThe setting of the control panel of the printer is...

HCalibration Value
You can specify whether to apply the results of calibration performed on the printer to image processing.
Setting ItemDetailsPrinter DefaultThe setting of the control panel of the printer is applied.EnabledPrint using the calibration results.DisabledPrint without using the calibration results. Select this to avoid the changing of the color of imagesduring printing by color calibration.
G Mirror
Specify whether to print a mirror image, as needed. Select this option to print a version of...

Note
•To display the Color Adjustment sheet, on the Main sheet, click Color Settings by Color Mode in Advanced Settings.(See"Main Sheet →P.184")
•
ASample Type
Choose a sample image from  Standard, Portrait , Landscape , or Graphics .
•
BView Color Pattern
Select this checkbox to display the color pattern.
•
CApply to Sample
Select this checkbox to apply the changed settings to the sample image.
•
DCyan /E Magenta /F Yellow
Fine-tune color tones by adjusting the levels of each color.
•
G Gray...