Canon Ir5065n User Guide

Periodic Inspection of the Breakerxxix
3Switch the breaker lever to ON (I side).
4Press the main power switch to I side.
5Fill in the check sheet, located on p. 4-6, to 
document your periodic inspections of the 
breaker.
ON
OFF
3
( I side)
( side)
4
 

Periodic Inspection of the Breakerxxx
 

CHAPTER
1-1
1
Before You Start Using This 
Machine
This chapter describes what you should know before using this machine, such as parts and their functions, and how to turn ON the main power.
Installation Location and Handling  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2Installation Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2Handling...

Installation Location and Handling1-2
Before You Start Using This Machine
1
Installation Location and Handling
This section describes precautions for installation location and handling. We recommend that you read this section prior to using this machine.
 
Installation Precautions
Avoid Installing the Machine in the Following Locations
■Avoid locations subject to extremes of 
temperature and humidity, whether low or 
high.
For example, avoid installing the machine near water faucets, hot water heaters,...

Installation Location and Handling1-3
Before You Start Using This Machine
1
■Avoid poorly ventilated locations.
This machine generates a slight amount of ozone during normal use. Although sensitivity to ozone may vary, this amount is not harmful. Ozone may be more noticeable during extended use or long production runs, especially in poorly ventilated rooms. It is recommended that the room be appropriately ventilated, sufficient to maintain a comfortable working environment, in areas of machine operation....

Installation Location and Handling1-4
Before You Start Using This Machine
1
■Avoid exposing the machine to rapid 
changes in temperature.
If the room in which the machine is installed is cold but rapidly heated, water droplets (condensation) may form inside the machine. This may result in a noticeable degradation in the quality of the copied image, the inability to properly scan an original, or the copies having no printed image at all.
■Avoid installing the machine near computers or other precision...

Installation Location and Handling1-5
Before You Start Using This Machine
1
Select a Safe Power Supply
■Plug the machine into a 220-240 V AC outlet.
■Make sure that the power supply for the machine is safe, and has a steady 
voltage.
■Do not connect other electrical equipment to the same power outlet to which 
the machine is connected.
■Do not connect the power cord to a multiplug power strip, as this may cause 
a fire or electrical shock.
■The power cord may become damaged if it 
is often stepped on or...

Installation Location and Handling1-6
Before You Start Using This Machine
1
Provide Adequate Installation Space
■Provide enough space on each side of the machine for unrestricted 
operation.
The optional Copy Tray-L1 is attached.
1,278 mm
1,448 mm
100 mm or more
The optional Saddle Finisher-AD2, Document Insertion/Folding Unit-F1, Puncher 
Unit-AS1, and Paper Deck-AE1 are attached.
2, 591 mm
1,278 mm
100 mm or more
 

Installation Location and Handling1-7
Before You Start Using This Machine
1
Moving the Machine
■If you intend to move the machine, even to 
a location on the same floor of your 
building, contact your local authorized 
Canon dealer beforehand. Do not attempt to 
move the machine yourself.
 
Handling Precautions
■Do not attempt to disassemble or modify 
the machine.
■Some parts inside the machine are subject to high-voltages and 
temperatures. Take adequate precautions when inspecting the inside of the...

Installation Location and Handling1-8
Before You Start Using This Machine
1
■Be careful not to spill liquid or drop any 
foreign objects, such as paper clips or 
staples inside the machine. If a foreign 
object comes into contact with electrical 
parts inside the machine, it might cause a 
short circuit and result in a fire or electrical 
shock.
■If there is smoke, or unusual noise, 
immediately turn the main power switch 
OFF, disconnect the power cord from the 
outlet, and call your local authorized...