Canon Ir Advance C5030 User Guide

1
Basic Copying Features2-19
2
Making Copies in the Voice Navigation Mode
Canceling a Copy Job
1Press   (Back) or   (Next) to 
move the focus to [Stop]   press 
  (Select) on the pop-up screen that 
appears while the machine is 
scanning, printing, or waiting to print.
The copy job is canceled.
NOTE
If you cancel a copy job while the 
machine is scanning, make sure to 
remove your originals.
 

Making Copies in the Voice Navigation Mode
Placing Originals
2-20
2
Placing Originals
Place your originals on the platen glass or 
into the feeder, depending on the size and 
type of the original, and the copy modes you 
want to use.
NOTE
If the original has too many pages to be 
placed in the feeder all at once, use the Job 
Build mode on the Options screen. For more 
information on using the Job Build mode, 
see the instruction manuals that came with 
your machine. The Job Build mode is not 
supported...

1
Placing Originals2-21
2
Making Copies in the Voice Navigation Mode
Feeder
Place your originals into the feeder when 
you want to copy several originals at the 
same time, and press   (Start). The 
machine automatically feeds the originals 
to the platen glass and scans them. 2-sided 
originals can also be automatically turned 
over and scanned as 2 or 1-sided 
documents.
 

Making Copies in the Voice Navigation Mode
1
2
Placing Originals
2-22
Orientation
You can place an original either vertically or 
horizontally. Always align the top edge of your 
original with the back edge of the platen glass 
(by the arrow in the top left corner) or the 
back edge of the feeder.
Place the original 
face down. 
Place the original 
face down. 
Platen Glass
Vertical Placement Horizontal Placement
Place the original 
face up. 
Place the original 
face up. 
Feeder
Vertical Placement...

1
Placing Originals2-23
2
Making Copies in the Voice Navigation Mode
NOTE
•If the top edge of the original is not aligned 
with the back edge of the platen glass (by 
the arrow in the top left corner), your 
original may not be scanned correctly, 
depending on the copy modes that you 
have set.
•Originals of the following sizes can be 
placed either vertically or horizontally. 
However, the scanning speed for 
horizontally placed originals is somewhat 
slower than vertically placed originals. 
Place...

Making Copies in the Voice Navigation Mode
1
2
Placing Originals
2-24
Platen Glass
You should use the platen glass when 
copying bound originals (such as books and 
magazines), heavy or lightweight originals, 
and transparencies. (See Paper Selection, 
on p. 2-37.)
NOTE
The machine automatically detects the size 
of the following originals: 11 x 17, LGL, 
LTR, LTRR, and STMTR/A3, B4, A4, A4R, 
B5, B5R, A5, and B6.
 

1
Placing Originals2-25
2
Making Copies in the Voice Navigation Mode
1Lift the feeder.
IMPORTANT
This machine is equipped with an open/
close sensor on the feeder (see circled 
area in the above illustration). When 
placing originals on the platen glass, lift 
the feeder approximately 
11
 7/8 (300 mm) so that the sensor 
detaches from the feeder. If the sensor 
does not detach from the feeder, the size 
of the originals may not be detected 
correctly.
Sensor
 

Making Copies in the Voice Navigation Mode
1
2
Placing Originals
2-26
2Place your originals face down.
The surface of the original that you want 
to copy must be placed face down.
Align the top edge of your original with 
the back edge of the platen glass (by 
the arrow in the top left corner).
 

1
Placing Originals2-27
2
Making Copies in the Voice Navigation Mode
Place books and other bound originals 
on the platen glass in the same way.
NOTE
When you are enlarging an LTR or STMT/
A4, B5 or A5 original onto 11 x 17 or 
LGL/A3 or B4 paper, place the original 
horizontally on the platen glass, and align 
it with the LTRR or STMTR/A4R, B5R, or 
A5R marks.
3Gently close the feeder.
 

Making Copies in the Voice Navigation Mode
1
2
Placing Originals
2-28
IMPORTANTCAUTION
• Close the feeder gently to avoid 
catching your hands, as this may 
result in personal injury.
• Do not press down hard on the 
feeder when using the platen glass 
to make copies of thick books. 
Doing so may damage the platen 
glass and result in personal injury.
IMPORTANT
If you are placing the original on the 
platen glass, the size of the original is 
detected after the feeder is closed. Be 
sure to close the...