Canon Ir Advance C5030 User Guide

1
Basic Copy Settings2-39
2
Making Copies in the Voice Navigation Mode
NOTE
For instructions on placing originals, see 
Placing Originals, on p. 2-20.
2Press   (Back) or   (Next) to 
move the focus to [Select Paper]   
press  (Select).
The voice guide announces that the 
Select Paper Setting screen is 
displayed.
 

Making Copies in the Voice Navigation Mode
1
2
Basic Copy Settings
2-40
3Press   (Back) or   (Next) to 
move the focus to the paper source 
containing the desired paper size   
press  (Select).
The voice guide announces the paper 
source number, paper size, and paper 
type that is loaded in that paper source.
4Press  (Con firm).
The display returns to the Regular Copy 
Basic Features screen.
 

1
Basic Copy Settings2-41
2
Making Copies in the Voice Navigation Mode
NOTE
You can also move the focus to [OK] and 
press Numeric Key   (Select) to close 
the Paper Selection screen.
5Press  (Start).
Copying starts.
NOTE
To cancel all settings and return the 
machine to the Standard mode, press 
 (Reset).
Manual Exposure Adjustment
You can manually adjust the exposure to the 
most appropriate level for the original.
1Place your originals.
NOTE
For instructions on placing originals, see 
Placing...

Making Copies in the Voice Navigation Mode
1
2
Basic Copy Settings
2-42
2Press   (Back) or   (Next) to 
move the focus to [Density]   press 
 (Select).
The voice guide announces that the 
Density settings screen is displayed.
NOTE
If the [Density] shor tcut key is not 
displayed on the Copy Basic Features 
screen, you cannot use the Density 
mode. For information on how to display 
the shortcut key, see the instruction 
manuals that came with your machine.
 

1
Basic Copy Settings2-43
2
Making Copies in the Voice Navigation Mode
3Press   (Back) or   (Next) to 
move the focus over the Adjust Basic 
Level indicator  press   (Select).
Adjust Basic Level Indicator
 

Making Copies in the Voice Navigation Mode
1
2
Basic Copy Settings
2-44
4To manually set the copy exposure, 
press   (Back) to move the 
indicator between [ ] and [ ] to the 
left to make the exposure lighter. 
Press    (Next) to move the indicator 
to the right to make the exposure 
darker.
The voice guide informs you of the 
position of the indicator (from -4 to +4).
Example:
If the indicator is in the middle (the 
Standard setting), and you press 
 (Next), the indicator moves to the 
right.
You will...

1
Basic Copy Settings2-45
2
Making Copies in the Voice Navigation Mode
IMPORTANT
When you make a copy, the copy 
exposure is automatically set to 
Standard (between the lightest and 
darkest settings (-4 to +4)). Negative 
numbers make the copies lighter. -1, is 
slightly lighter than the Standard setting, 
and -4 is the lightest setting. The 
movement from +1 to +4 follows the same 
pattern, making the copy darker.
5Press  (Select).
6Press  (Confirm).
NOTE
To automatically adjust the background 
density,...

Making Copies in the Voice Navigation Mode
1
2
Basic Copy Settings
2-46
8Press  (Start).
Copying starts.
NOTE
To cancel all settings and return the 
machine to the Standard mode, press 
 (Reset).
Original Type Selection
You can select the original type so that the 
machine reproduces copies as faithful as 
possible to the original. The following four 
original type modes are available for 
adjusting the image quality.
IMPORTANT
Combinations of these four modes (Text/
Photo/Map, Printed Image, Photo...

1
Basic Copy Settings2-47
2
Making Copies in the Voice Navigation Mode
Text/Photo/Map Mode
This mode is best suited for originals 
containing text, images/photos, as well as 
fine graphics, such as those on a map.
 Printed Image Mode
This mode is best suited for making copies 
of images printed with halftone dots.
 Photo Printout Mode
This mode is best suited for photos printed 
on photographic paper.
 Text Mode
This mode is best suited for making copies 
of text originals. Blueprints or pencil drawn...

Making Copies in the Voice Navigation Mode
1
2
Basic Copy Settings
2-48
2Press   (Back) or   (Next) to 
move the focus to [Original Type]   
press  (Select).
The voice guide announces that the 
Original Type selection screen is 
displayed.
NOTE
If the [Original Type] shortcut key is not 
displayed on the Copy Basic Features 
screen, you cannot use the Original Type 
mode. For information on how to display 
the shortcut key, see the instruction 
manuals that came with your machine.