Canon Ir 2230 User Guide

Settings Menu2-11
2
Printer Settings Menu
Binding Location : Long edgeMargin : [+]ABC
Binding Location : Long edgeMargin : [-]
Binding Location : Short edgeMargin : [+]
Binding Location : Short edgeMargin : [-]
Portrait printing  with margin
ABC
ABC
ABC
DEF
DEF
DEF
DEF
ABCDE
ABCDE
ABCDE
ABCDE
FGHIJK
FGHIJK
FGHIJK
FGHIJK
Front Back(Two-sided printing)Front
Binding Location and Margin Settings
Refer to the figures below to set binding location and margins.
Set the paper orientation in the application you...

Settings Menu2-12
2
Printer Settings Menu
■Offset X/Offset Y
-50.0 to +50.0 mm (in increments of 0.5 mm); 0.0* mm
This setting sets the offset position in millimeters. The settings can be set between -50.0 mm (-2.00 inch) and +50.0 mm (+2.00 inch) in increments of 0.5 mm (0.01 inch).
The print position is adjusted in the vertical or horizontal direction to the value specified in the setting value.
You can increase or decrease the setting in increments of 0.5 mm (0.01 inch) to adjust the print position,...

Settings Menu2-13
2
Printer Settings Menu
Auto Continue
On, Off*
This setting enables you to automatically clear an error and continue printing when an error occurs (Error skip).
If [On] is selected, error skips are performed automatically.
If [Off] is selected, you must perform error skips from the touch panel display.
NOTE
 
•To perform an error skip, press [Print] on the System Monitor screen ➞ select the job containing the error ➞ press [Details] ➞ [Error Skip].
•Error skip only temporarily clears an...

Settings Menu2-14
2
Printer Settings Menu
Timeout
Timeout (5 to 300 seconds), Off; 15* seconds
This setting enables you to force jobs to finish if no data is received during the set period of time.
If Timeout is On, jobs can finish automatically. For example, if print data still remains in the machine because a form feed command cannot be processed, the paper can be fed automatically.
If Timeout is Off, jobs will not end automatically.
IMPORTANT
 
•If this function is set so that a job will timeout, the...

Settings Menu2-15
2
Printer Settings Menu
Finisher
Off*, Collate, Rotate+Collate, Rotate+Group, Offset+Collate, Offset+Group, and Staple+CollateStaple Position:Corner (Upper-L)*, Double (Top), Corner (Upper-R), Double (Right), Corner (Lower-R), Double (Bottom), Corner (Lower-L), and Double (Left)
Some of the above options require specific delivery trays and may not be available unless appropriate delivery trays are installed:
You can choose from several features when collating printed matter. 
Off
This...

Settings Menu2-16
2
Printer Settings Menu
Offset+Collate
This setting prints all pages of each copy (collating), and offsets every other complete copy to indicate where each copy starts.
Offset+Group
This setting prints all copies of the same page before printing the next page. It offsets every other complete set of pages to indicate where each new set starts.
Staple+Collate
This setting prints all pages of each copy (collating) and prepares them for stapling according to the option selected for...

Settings Menu2-17
2
Printer Settings Menu
IMPORTANT
 
Please note that the memory of the machine can store up to 8,000 pages. When you send a secured document to be stored in the memory to be printed at a later time, and the memory is full (already reached its maximum capacity), your document will not be stored. The memory may be full because the machine is being used for other functions (such as storing a document in an inbox or storing a form) or other jobs, which use memory space.
NOTE
 
•...

Settings Menu2-18
2
Printer Settings Menu
• [Staple+Collate] is available for selection if the paper size is A3, JIS-B4, A4, A4R, JIS-B5, 11 x 17, LGL, LTR, LTRR, or EXEC. Available staple locations depend on paper size and image orientation, as shown.
•The maximum number of sheets that can be stapled is 30 for A4R, A3, JIS-B4, LGL, and 11 x 17, 50 for A4, JIS-B5, LTR, LTRR, and EXEC. If the number of sheets is greater than the limit, they will not be stapled.
•The maximum number of sheets that can be...

Settings Menu2-19
2
Printer Settings Menu
Punch
Off*, Top, Bottom, Left, and Right
This setting enables you to specify the desired paper position for two holes to be punched for binding.
NOTE
 
•This function is available for selection in combination with the following optional units. 
- If the Finisher-S1 is attached to the Puncher Unit-Q1.
- If the Finisher-Q3 or Saddle Finisher-Q4 is attached to the Puncher Unit-L1.
•Acceptable paper sizes for this option are A3, JIS-B4, A4, A4R, JIS-B5, JIS-B5R, 11 x...

Settings Menu2-20
2
Printer Settings Menu
Booklet
On, Off*
This setting enables you to prepare the printout for binding as a booklet. Booklet printing is a process whereby two pages of data are printed on the front and back of one page and it is folded in half to create a book.
If [On] is selected, the pages are bound on the left side.
IMPORTANT
 
Please note that the memory of the machine can store up to 8,000 pages. When you send a secured document to be stored in the memory to be printed at a later...