Canon Ir 2230 User Guide

2-1
CHAPTER
2Printer Settings Menu
This chapter describes how to use the Printer Settings menu and its submenus.
An Overview of Printer Settings  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-2
Settings Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-5Copies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

An Overview of Printer Settings2-2
2
Printer Settings Menu
An Overview of Printer Settings
The following table lists all settings of the Printer Settings menu.
■Settings Menu
ItemSettingsApplicable Page
Copies1 to 9999; 1*p. 2-5
2-Sided PrintingOn, Off*p. 2-5
Paper Feed
  Default Paper SizeLetter, Legal, A4*, A3, A5, 11 x 17, Executive, Statement, Envelope Monarch, Envelope COM10, Envelope DL, Envelope ISO-B5, Envelope ISO-C5p. 2-6
  Default Paper TypePlain Paper*, Transparency, Heavy Paper, Recycled...

An Overview of Printer Settings2-3
2
Printer Settings MenuAn asterisk (*) indicates the default setting.*1 The menu will not be displayed when Toner Save is set to On.*2 The menu will not be displayed when Copy Set Numbering is set to On.*3 The menu will not be displayed when Booklet is set to Off.*4 This function is not available if the Booklet or Transparency Interleaving option is specified as any setting other than Off.*5 Settings are not applicable for the iR3530/iR2230.
■UFR II Settings
An asterisk...

An Overview of Printer Settings2-4
2
Printer Settings Menu
■Imaging Settings
An asterisk (*) indicates the default setting.
■Utility Menu
ItemSettingsApplicable Page
Image OrientationAuto*, Vertical, Horizontalp. 2-27
ZoomOff*, Autop. 2-27
Print PositionAuto*, Center, Top Leftp. 2-28
Show WarningsOn*, Offp. 2-28
Enlarge Print AreaOff*, Onp. 2-28
ItemSettingsApplicable Page
Reset Printer— p. 2-29
 

Settings Menu2-5
2
Printer Settings Menu
Settings Menu
Copies
1 to 9999; 1*
This setting enables you to specify the number of copies printed. The default setting is 1, but you can specify up to 9999 copies.
2-Sided Printing
On, Off*
This parameter selects one-sided or two-sided printing. When 2-Sided Printing is specified, the document is printed on both sides of the paper.
NOTE
 
•Two-sided printing can use either the paper drawer or the stack bypass in sizes of A3, JIS-B4, A4, A4R, JIS-B5, JIS-B5R,...

Settings Menu2-6
2
Printer Settings Menu
Paper Feed
■Default Paper Size
Letter, Legal, A4*, A3, A5, 11 x 17, Executive, Statement, Envelope Monarch, Envelope COM10, Envelope DL, Envelope ISO-B5, and Envelope ISO-C5
This parameter defines the default paper size used when the paper size cannot be set within the application software, when no paper source is specified.
■Default Paper Type
Plain Paper*, Transparency, Heavy Paper, Recycled Paper, Color Paper, Tracing Paper, Labels, Bond Paper, and Envelope...

Settings Menu2-7
2
Printer Settings Menu
■Paper Size Override
On, Off*
If paper of the size that is set in the printer driver has not been loaded in the paper drawer, the paper that is printed is changed to the following sizes.
If [On] is selected, the paper size is changed.
If [Off] is selected, the paper supply message is displayed and the paper size is not changed.
NOTE
 
The paper size does not change if there is no paper in the paper source of the size that is set in the printer driver, even if...

Settings Menu2-8
2
Printer Settings Menu
■Density
1 to 9; 5*
This setting adjusts the print density.
Pressing [Dark] makes the print image darker, pressing [Light] makes the image lighter. This setting has 9 levels you can adjust, with level 5 (middle level) being the default setting.
NOTE
 
This function is not available if the Toner Save option is set to On.
■Toner Save
On, Off*
This setting determines whether Toner Save is enabled. Toner Save uses less toner to print documents and may result in longer...

Settings Menu2-9
2
Printer Settings Menu
Layout
■Binding Location
Long Edge*, Short Edge
This parameter determines whether the binding position is along the long edge or the short edge of the paper. When binding for two-sided printing, the image orientation is automatically adjusted for correct layout.
When the binding position is on the long edge of the paper:
When the binding position is on the short edge of the paper:
NOTE
 
•You cannot create a binding margin with this setting alone. Use this setting...

Settings Menu2-10
2
Printer Settings Menu
■Margin
-50.0 to +50.0 mm (in increments of 0.5 mm); 0.0* mm
This setting sets the page margin in millimeters. The settings can be set between -50.0 mm (-1.90 inch) and +50.0 mm (+1.90 inch) in increments of 0.5 mm (0.01 inch). 
Use [   ] to increase the width of the inside margin. 
Use [   ] to increase the width of the outside margin.
You can specify the edge along which the margin will be created in the Binding Location setting (previous setting). To create a...