Canon Ir 2016i User Guide
Have a look at the manual Canon Ir 2016i User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 82
List of Error Messages3-8
Troubleshooting
3
MEMORY FULL
Cause The machine’s memory is full of scanned documents.
Remedy Divide the original into some stacks and scan them one by one.
NO APPROPRIATE SIZE
Cause Although is selected when copying, paper of suitable size is not set in
the paper drawer nor on the stack bypass.
Remedy Select the paper size, or set the copy ratio.
If you press [Start] while this message is displayed, the paper with the least
margin is selected automatically and printing...](http://img.usermanuals.tech/thumb/14/56481/w64_canon_ir_2016i-user-guide-81.png "Page 82
List of Error Messages3-8
Troubleshooting
3
MEMORY FULL
Cause The machine’s memory is full of scanned documents.
Remedy Divide the original into some stacks and scan them one by one.
NO APPROPRIATE SIZE
Cause Although is selected when copying, paper of suitable size is not set in
the paper drawer nor on the stack bypass.
Remedy Select the paper size, or set the copy ratio.
If you press [Start] while this message is displayed, the paper with the least
margin is selected automatically and printing...")
![Page 84
List of Error Messages3-10
Troubleshooting
3
STAPLE JAM/OPEN FINISHER COVER
Cause A staple jam may have occurred in the Finisher-U1.
Remedy Check if a staple jam has occurred.
STOP KEY PRESSED/PRESS OK KEY
Cause [Stop] has been pressed while scanning the original using the feeder.
Remedy Press [OK], and set the original again.
SYSTEM ERROR/Exxx*
Cause An error of some kind has occurred in the machine.
Remedy Turn OFF the main power, wait for more than 10 seconds, then turn it ON again. If this does not...](http://img.usermanuals.tech/thumb/14/56481/w64_canon_ir_2016i-user-guide-83.png "Page 84
List of Error Messages3-10
Troubleshooting
3
STAPLE JAM/OPEN FINISHER COVER
Cause A staple jam may have occurred in the Finisher-U1.
Remedy Check if a staple jam has occurred.
STOP KEY PRESSED/PRESS OK KEY
Cause [Stop] has been pressed while scanning the original using the feeder.
Remedy Press [OK], and set the original again.
SYSTEM ERROR/Exxx*
Cause An error of some kind has occurred in the machine.
Remedy Turn OFF the main power, wait for more than 10 seconds, then turn it ON again. If this does not...")
Specifications subject to change without notice.© Canon Europa N.V. 2005 Canon Canon Inc.30-2, Shimomaruko 3-chome,Ohta-ku, Tokyo 146-8501, Japan Europe, Africa and Middle EastCanon Europa N.V.P.O. Box 2262,1180 EG Amstelveen, Netherlands Canon Middle East FZ-LLCP.O. Box 27616DubaiUnited Arab Emirates email: [email protected]