Canon Imageprograf Ipf8300 User Guide

Check Image with Print Area Layout
Displays the print range and the area out of the print range in the layout matching the media size set in the print area layout.
Select  Print Area Layout  in Preview .Note•When  the  cursor  on  the  preview  is  displayed  as   on  the  preview,  you  can  specify  the  print  position  by
dragging the image.
• When the cursor is displayed as 
 on the preview, the below conditions on the  Page Setup sheet have all
been met.
• There is no checkmark in  Borderless...

Check the original image with Image
In the image preview you can check the entire image that you have input.
Select  Image in Preview .Note•When  the  cursor  appears  as  a  small  magnifying  glass   while  there  is  an  Image  in  the  Preview   area,  the
Selected Range  feature is enabled and you an drag the cursor on the image and select an area for printing.
• When you click the image while the cursor is displayed as 
 on the preview, the selected area is deselec-
ted.
Mac OS X Software 
>
 Print...

Check Image with Roll Paper Preview
Display the media size and roll paper information on the top in the layout printing on roll paper in Roll Paper Preview
Select  Roll Paper Preview  in Preview .Note•To select  Roll Paper Preview  in Preview , select Roll Paper  in Paper Source .
Print with a Desired Picture Quality
You can specify and print at the resolution you desire.
1. Display the  Main sheet.
Mac OS X Software 
>
 Print Plug-In for Photoshop/Digital Photo Professional 
>iPF8300Check Image with...

2.Select the media set to the printer in  Media Type.Note•Always  select  media  type  that  is  actually  set  in  the  printer.  When  the  media  you  chose  is  different
from the media set in the printer, you may not receive the desired print results.
3. Choose either  Accuracy 300ppi  or High Accuracy 600ppi  for the resolution to process images in  Input Resolution
to Plug-in .
Note•When  you  select  Accuracy  300ppi   images  are  processed  at  an  accurate  resolution.  This  can  control...

Adjust the Colors while Checking the Preview (for Color)
You can adjust the colors while checking the adjustments in the preview.
The following explanation is on the procedures for adjusting example image below.
• Low  for Cyan
• High  for Yellow
• Low  for Saturation
• Warm Black  for Gray Tone
• Enhance brightness for the curves
The above image adjustments are reflected in the before and after images below.Before ApplicationAfter Application
1. Display the  Color Settings  sheet.
2.Drag the slide bar...

3.Drag the slide bar in the direction of  High in Yellow .
4. Drag the slide bar in the direction of  Low in Saturation .
5. Drag the slide bar in the direction of  Warm Black in Gray Tone .Note•You can change the numbers by inputting in numerical characters.
• You can change the numbers by clicking either  ▲ button or  ▼ button.
6. Click the  Curves button then click near the center of the curve.
7. Enter 120 in  Input and 135 in  Output then click the  OK button.
8. Click the  Print button.
 
The...

• Light for Highlight
• Light  for Shadow
• Enhance brightness for the curves
The unapplied and the applied images of the above image adjustments are as below.Before ApplicationAfter Application
1. Open the  Main sheet.
2. Select  Auto (Monochrome Photo)  in Output Profile .
Mac OS X Software 
>
 Print Plug-In for Photoshop/Digital Photo Professional 
>iPF8300Adjust the Colors while Checking the Preview (for Monochrome)5639
 

3.Open the  Color Settings  sheet.
4.In Contrast , drag the slide bar toward  Low.
5. In Highlight , drag the slide bar toward  Light.
6. In Shadow , drag the slide bar toward  Light.
Note•You can change the numbers by inputting in numerical characters.
• You can change the numbers by clicking either  ▲ button or  ▼ button.
7. Click the  Curves button then click near the center of the curve.
Mac OS X Software 
>
 Print Plug-In for Photoshop/Digital Photo Professional 
>Adjust the Colors while Checking...

8.Enter 120 in  Input and 135 in  Output then click the  OK button.
9. Click the  Print button.
 
This applies the image adjustments and starts the print job.
Mac OS X Software 
>
 Print Plug-In for Photoshop/Digital Photo Professional 
>iPF8300Adjust the Colors while Checking the Preview (for Monochrome)5641
 

Adjust the Colors by Color Matching
When you print a color image imported from a scanner or a digital camera, the image may appear different from the image
on the screen. That is due to the differences in color on the screen and in the printer. In Print Plug-In, you can get the color
balance of the print product closer to the color balance displayed on the screen through performing ICC (International Color
Consortium) color profile settings, matching method settings, and settings for the internal...