Canon Imageprograf Ipf8300 User Guide

Support Sheet
You can display product support information and the electronic manual.
Support Information  button
Click the button to display websites that contain the latest product information.
Note• An Internet connection is needed to view the websites.
User Manual  button
Click the button to display the printer manuals installed on the computer.
Note• You must have User Manual installed on your computer.
About  button
Click the button to open the version information window of the Print Plug-In. Click...

Paper Detailed Settings Dialog BoxThis dialog box appears when you click the  Advanced Settings button on the Main Sheet. You can set  Drying Time and
Roll Paper Margin for Safety  by media type.
Drying Time
Between Pages
This sets the wait time for the ink to dry between each completely printed sheet and the output of the sheet.
SettingDetailsPrinter DefaultThe settings of the printer operating panel are applied.NoneThe paper is ejected immediately after printing.30sec.  / 1min.  / 3min.  / 5min.  /...

SettingDetails5mm*Select for Media Type that has no problem when printing with a standard sizemargin.20mmThis setting sets the margin about 17 mm (in the feed direction) longer than thestandard margin for the media size.
*This is for Media Type that has a strong tendency to curl, causing the printhead to
scratch the surface.
 
Cut Speed
This selects the auto cut speed.
SettingDetailsPrinter DefaultThe settings of the printer operating panel are applied.FastSelect this setting if cutting with the...

Set Configuration Dialog Box
This dialog box appears when you click the  Set Configuration button on the Main Sheet. You can set the adjustment of
image sharpness and image enlargement method.
Sharpen
Performs adjustment of the sharpness (outline) settings.  
Image Enlargement Method
You can select the image enlargement method.
The following settings are available for the image enlargement method.
SettingDetailsNearest NeighborPerforms simple enlargement.BilinearPerforms line vector...

Note•If printing does not finish correctly because it was canceled or an error occurred, the plug-in does not close.
Output Method
You can select the output method.
The following settings are available for the output method.
SettingDetailsPrintNormal printing. The print job data is stored temporarily in the box as the job
prints.Save in mail boxSaves the print data in the mail box.
If you select  Save in mail box , you must specify  Name of data to be saved .Print after reception is com-
pleteWhen you...

Note•This can be used if  Adobe CMM is selected as the  Conversion Engine .
 
Proof Options
Configures settings related to printing press simulation.
The proof options consist of the following settings.
SettingDetailsSimulate Paper ColorSelect this when performing paper color simulation.
Roll Paper Options Dialog Box
This dialog box appears when you click the  Roll Paper Options button on the Page Setup Sheet. You can set the roll paper
width and perform the auto cut settings.
Roll Paper Width
This...

Size Options Dialog Box
This dialog box appears when you click the  Size Options button on the  Page Setup Sheet. You can select a media name,
size and other settings.
Paper Size List
Displays all the standard sizes and custom media sizes.
 
Custom Paper Size Name
You can enter any name up to 63 characters.
 
Units
You can select the units of measure to use when you define custom media size. Switching this setting resets the units of measure for the entire Plug-In.  
Paper Size
Width
Enter the width of...

Curves Dialog BoxThis dialog box appears when you click the  Curves button on the  Color Settings  Sheet. You can set  Channel and other
settings.
Channel
Select from among  RGB, Red , Green , or Blue .
Note• Gray  is displayed for monochrome printing and this selection cannot be changed.
Input
Enter an input value.
Note• The allowed entry range is 0 to 255.
• You can change the numbers by clicking either  ▲ button or  ▼ button.
Output
Enter an output value.
Note• The allowed entry range is 0 to 255.
•...

Load Curves button
Click the button to load stored data for a tone curve.  
Save Curves  button
Click the button to stores the current tone curve settings.
 
Print History Details Dialog Box
This dialog box appears when you click the  Details button on the  Print History Sheet. This controls print history. For more
information about  Print History Details , see " Utilize Print History ."
→P.654
Print History
Print History appears in list format.
Display ItemsDetailsPrint History NumberDisplays...

Add button
Click the 
 button to add the selected print history to preferences.
Note• Up to 200 print preference items can be added.
Favorites
The print history stored in print preferences displays in list format.
Note• You can change the order by selecting an item and dragging it to another place.
Import  button
Click the button to import print history saved as a file.
 
Export  button
Click the button to save print history as a file that is stored in print preferences.
 
Delete  button
Click the button...