Canon Imageprograf Ipf8300 User Guide

Perform Proof in Preview
Place a checkmark here to simulate the colors of the output product in the preview.Note• If  Auto (Color)  is selected under  Output Profile, some media types are enabled.
• If ICC profile is selected under  Output Profile, this is always enabled.
• The actual color balance of the print product and the simulation product may differ with some environments
and conditions. In addition, when you have selected an ICC Profile with  Output Profile and it is not compat-
ible with the...

PrinterThe printer types are displayed.
 
Select  button
Click this button to display the  Select Printer dialog box.
When you click the  OK button after selecting the printer in the  Select Printer dialog box, you can change the printer that
corresponds with Print Plug-In.
 
Media Type
This allows you to select the media type.
For more information about  Media Type, see " Customize Media Settings ."
→P.654
Note•Always  select  media  type  that  is  actually  set  in  the  printer.  When  the...

SettingDetailsHighestA setting for printing at the highest resolution when quality is most important.
Printing takes longer and consumes more ink than in other modes, but this mode offers superior printing quality.HighChoose this setting to print at high resolution when quality is most important.Printing takes longer and consumes more ink than in  Standard or Draft  modes,
but this mode offers exceptional printing quality.StandardChoose this setting to print at standard resolution when quality and speed...

The following settings are available for the matching method.SettingDetailsPerceptualThis converts the image to an image with natural color balance and gradation. Thisis useful for pictures.Perceptual (People, Dark
Areas)In subdued, dark photos, optimal color matching is applied to attractive reproduc-
tion images of people and dark scenes.SaturationThis converts the image to an image with heightened color saturation. The color
balance of pictures and drawings may change.Relative ColorimetricThis...

Page Setup SheetYou can use this sheet to set the size of the image to be printed, the media size, and whether to enlarge/reduce the image.
Input Image SizeThe size of the image imported to Print Plug-In is displayed.
 
Borderless Printing
When you place a checkmark here, the  Specify Roll Paper Width dialog box is displayed and you can print an image with-
out borders.
For more information about  Borderless Printing, see " Print with No Borders ."
→P.653
Note•Available only if rolls are selected...

Note•This is not displayed when a checkmark is placed in  Borderless Printing.
Output Image Size
The output image size is displayed up to one place after the decimal point in millimeters.
Note• When  Paper Size  is smaller than  Output Image Size , part of the image may not print.
Paper Size
You can select the size of the print media.
Note• This is not displayed when a checkmark is placed in  Borderless Printing.
• This is not displayed when  Fit Roll Paper Width is set in Enlarged/Reduced Printing ....

SettingDetailsUpper-Left of Roll PaperPrints the top left of Media Size on the top left of the selected roll paper.Center of Roll PaperPrints the center of Media Size on the center of the selected roll paper.Note•Select  Roll Paper Preview  in Preview  when you select  Roll Paper Layout .
Paper Source
You can select the media source.
The following settings are available for media source.
SettingDetailsRoll PaperSelect to print on roll paper.Cut SheetSelect to print on the cut sheet.
Roll Paper Options...

Color Settings Sheet
You can use this sheet to adjust image Color,  Brightness, Contrast , Saturation , and you can set the color balance of print
product more to your liking.
Cyan  / Magenta  / Yellow
You can adjust the strength or weakness of a color by either inputting a numerical value or dragging the slide bar.
Note• You can check the adjustments in the preview display.
Gray Tone
You can adjust gray tone from cool black (cool tones) to warm black (red tones) by either inputting a numerical value or...

Note•You can check the adjustments in the preview display.
Saturation
You can adjust the saturation of vivid color balance to dark color balance by either inputting a numerical value or dragging
the slide bar.
Note• You can check the adjustments in the preview display.
Curves  button
Click the button to open the  Curves dialog box then set the  Channel and other settings.
For more information about  Curves, see " Curves Dialog Box ."
→P.630
 
Defaults  button
Click the button to return all of the...

Apply button
When you click the button, the print setting content applies to the current image selected with  Print History and Favorites.
 
Details  button
Click the Details button to open the  Print History Details dialog box, where you can manage print history.
For more information about the print history details,  see "Print History Details Dialog Box ."
→P.631
 
Print Information
When you place a checkmark here, you can print the file name and print time and date on the image. The following...