Canon Imageprograf Ipf8300 User Guide

Check Image with Roll Paper Preview
Display the media size and roll paper information on the top in the layout printing on roll paper in Roll Paper Preview
Select  Roll Paper Preview  in Preview .Note•To select  Roll Paper Preview  in Preview , select Roll Paper  in Paper Source .
Print with a Desired Picture Quality
You can specify and print at the resolution you desire.
1. Display the  Main sheet.
Windows Software 
>
 Print Plug-In for Photoshop/Digital Photo Professional 
>iPF8300Check Image with Roll...

2.Select the media set to the printer in  Media Type.Note•Always  select  media  type  that  is  actually  set  in  the  printer.  When  the  media  you  chose  is  different
from the media set in the printer, you may not receive the desired print results.
3. Choose either  Accuracy 300ppi  or High Accuracy 600ppi  for the resolution to process images in  Input Resolution
to Plug-in .
Note•When  you  select  Accuracy  300ppi   images  are  processed  at  an  accurate  resolution.  This  can  control...

Adjust the Colors while Checking the Preview (for Color)
You can adjust the colors while checking the adjustments in the preview.
The following explanation is on the procedures for adjusting example image below.
• Low  for Cyan
• High  for Yellow
• Low  for Saturation
• Warm Black  for Gray Tone
• Enhance brightness for the curves
The above image adjustments are reflected in the before and after images below.Before ApplicationAfter Application
1. Display the  Color Settings  sheet.
2.Drag the slide bar...

3.Drag the slide bar in the direction of  High in Yellow .
4. Drag the slide bar in the direction of  Low in Saturation .
5. Drag the slide bar in the direction of  Warm Black in Gray Tone .Note•You can change the numbers by inputting in numerical characters.
• You can change the numbers by clicking either  ▲ button or  ▼ button.
6. Click the  Curves button then click near the center of the curve.
7. Enter 120 in  Input and 135 in  Output then click the  OK button.
8.
Click the  Print button.
 
The...

Before ApplicationAfter Application
1.Open the  Main sheet.
2. Select  Auto (Monochrome Photo)  in Output Profile .
Windows Software 
>
 Print Plug-In for Photoshop/Digital Photo Professional 
>iPF8300Adjust the Colors while Checking the Preview (for Monochrome)4337
 

3.Open the  Color Settings  sheet.
4.In Contrast , drag the slide bar toward  Low.
5. In Highlight , drag the slide bar toward  Light.
6. In Shadow , drag the slide bar toward  Light.
Note•You can change the numbers by inputting in numerical characters.
• You can change the numbers by clicking either  ▲ button or  ▼ button.
7. Click the  Curves button then click near the center of the curve.
Windows Software 
>
 Print Plug-In for Photoshop/Digital Photo Professional 
>Adjust the Colors while Checking the...

8.Enter 120 in  Input and 135 in  Output then click the  OK button.
9. Click the  Print button.
 
This applies the image adjustments and starts the print job.
Windows Software 
>
 Print Plug-In for Photoshop/Digital Photo Professional 
>iPF8300Adjust the Colors while Checking the Preview (for Monochrome)4339
 

Adjust the Colors by Color Matching
When you print a color image imported from a scanner or a digital camera, the image may appear different from the image
on the screen. That is due to the differences in color on the screen and in the printer. In Print Plug-In, you can get the color
balance of the print product closer to the color balance displayed on the screen through performing ICC (International Color
Consortium) color profile settings, matching method settings, and settings for the internal...

Print High-Quality Adobe RGB16bit Images
This prints a high-quality Adobe RGB16bit image taken with a high-end digital camera. Print Plug-In allows you to print
high color gamut and high tone images, when the Adobe RGB16bit image data has been retouched in Photoshop, without
compromising the level of tone in the image.
1. Select  the  Adobe  RGB16bit  image  data  in  Photoshop  and  start  Print  Plug-In.    (See  "Starting  from  Photoshop .")
→P.305
2.Clickbutton.
3. Check that  Adobe RGB  is...

4.Display the  Main sheet.
5.Select  High Accuracy 600ppi  in Input Resolution to Plug-in .
6. Select  Highest Gradation 16bit  in Input Bit to Plug-in .
7. Select the highest quality possible in  Print Mode.
8. If required, adjust the colors using color matching.
Note•For  more  information  about  the  color  matching,  see  "Adjust  the  Colors  by  Color  Matching ."
→P.340
9.Click the  Print button.
 
Printing of the Adobe RGB16bit image begins.
Windows Software 
>
 Print Plug-In for...