Canon Imageprograf Ipf8300 User Guide

SettingDetails5mm*Select for Media Type that has no problem when printing with a standard sizemargin.20mmThis setting sets the margin about 17 mm (in the feed direction) longer than thestandard margin for the media size.
*This is for Media Type that has a strong tendency to curl, causing the printhead to
scratch the surface.
 
Cut Speed
This selects the auto cut speed.
SettingDetailsPrinter DefaultThe settings of the printer operating panel are applied.FastSelect this setting if cutting with the...

Set Configuration Dialog Box
This dialog box appears when you click the  Set Configuration button on the Main Sheet. You can set the adjustment of
image sharpness and image enlargement method.
Sharpen
Performs adjustment of the sharpness (outline) settings.  
Image Enlargement Method
You can select the image enlargement method.
The following settings are available for the image enlargement method.
SettingDetailsNearest NeighborPerforms simple enlargement.BilinearPerforms line vector...

SettingDetailsPrintNormal printing. The print job data is stored temporarily in the box as the job
prints.Save in mail boxSaves the print data in the mail box.
If you select  Save in mail box , you must specify  Name of data to be saved .Print after reception is com-
pleteWhen you place a checkmark here, you can print after saving jobs in the temporary
storage space. This cannot be used when  Save in mail box is selected.
Initialize all warning dialog boxes
When this is checked, all of the warning dialog...

The proof options consist of the following settings.SettingDetailsSimulate Paper ColorSelect this when performing paper color simulation. When this is on, Simulate
Black Ink  is automatically turned on and becomes grayed out.Simulate Black InkSelect this when performing simulation of black ink. In order to enable this setting,
Adobe CMM  needs to be selected under  Conversion Engine.
Roll Paper Options Dialog Box
This dialog box appears when you click the  Roll Paper Options button on the Page Setup...

Size Options Dialog Box
This dialog box appears when you click the  Size Options button on the  Page Setup Sheet. You can select a media name,
size and other settings.
Paper Size List
Displays all the standard sizes and custom media sizes.
 
Custom Paper Size Name
You can enter any name up to 63 characters.
 
Units
You can select the units of measure to use when you define custom media size. Switching this setting resets the units of measure for the entire Plug-In.  
Paper Size
Width
Enter the width of...

Curves Dialog BoxThis dialog box appears when you click the  Curves button on the  Color Settings  Sheet. You can set  Channel and other
settings.
Channel
Select from among  RGB, Red , Green , or Blue .
Note• Gray  is displayed for monochrome printing and this selection cannot be changed.
Input
Enter an input value.
Note• The allowed entry range is 0 to 255.
• You can change the numbers by clicking either  ▲ button or  ▼ button.
Output
Enter an output value.
Note• The allowed entry range is 0 to 255.
•...

Save Curves button
Click the button to stores the current tone curve settings.
 
Print History Details Dialog Box
This dialog box appears when you click the  Details button on the  Print History Sheet. This controls print history. For more
information about  Print History Details , see " Utilize Print History ."
→P.352
Print History
Print History appears in list format.
Display ItemsDetailsPrint History NumberDisplays the print history number.File NameDisplays image file name.Printed atDisplays...

Add button
Click the 
 button to add the selected print history to preferences.
Note• Up to 200 print preference items can be added.
Favorites
The print history stored in print preferences displays in list format.
Note• You can change the order by selecting an item and dragging it to another place.
Import  button
Click the button to import print history saved as a file.
 
Export  button
Click the button to save print history as a file that is stored in print preferences.
 
Delete  button
Click the button...

Check Image with Print Area Layout
Displays the print range and the area out of the print range in the layout matching the media size set in the print area layout.
Select  Print Area Layout  in Preview .Note•When  the  cursor  on  the  preview  is  displayed  as   on  the  preview,  you  can  specify  the  print  position  by
dragging the image.
• When the cursor is displayed as 
 on the preview, the below conditions on the  Page Setup sheet have all
been met.
• There is no checkmark in  Borderless...

Check the original image with Image
In the image preview you can check the entire image that you have input.
Select  Image in Preview .Note
•When  the  cursor  appears  as  a  small  magnifying  glass   while  there  is  an  Image  in  the  Preview  area,
the  Selected  Range   feature  is  enabled  and  you  an  drag  the  cursor  on  the  image  and  select  an  area  for  print-
ing.
• When you click the image while the cursor is displayed as 
 on the preview, the selected area is deselec-
ted....