Canon Imageprograf Ipf8300 User Guide

Note•If a version of Photoshop that is not compatible with Print Plug-In is installed, the message  No target
software exists.  is displayed. Install Print Plug-In in a computer with a compatible Photoshop instal-
led.   (See " Operating Environment .")
→P.301
• If  the  folder  for  the  Photoshop  Plug-In  to  install  Print  Plug-In  cannot  be  found,  Specify  the  destina-
tion  for  installation  of  the  plug-in?   will  appear.  In  this  case,  refer  to  the  Photoshop  manual  then...

6.Click  Install  button.
7.Click  Finish  button.
Print Plug-In installation is complete.
Uninstall Procedures
The procedures for uninstalling the Print Plug-In are as follows. •Uninstall the Print Plug-In for Photoshop
 
1. Select  start in Control Panel  menu.
2. Open  Add or Remove Programs .
Windows Software 
>
 Print Plug-In for Photoshop/Digital Photo Professional 
>Uninstall ProceduresiPF83004304
 

3.Select  Canon iPFxxxx Print Plug-In for Photoshop xx , then click Change/Remove .
 
• Uninstall the Print Plug-In for Digital Photo Professional
 
1. Select  start in Control Panel  menu.
2. Open  Add or Remove Programs .
3. Select  Canon iPFxxxx Print Plug-In for Digital Photo Professional , then click Change/Remove .Note•iPFxxxx is the name of your printer.
Starting from Photoshop
Follow the procedure below to start the Print Plug-In from Photoshop.
1. Start Photoshop.
2. Open the image that you wish...

Note•If  the  message  below  is  displayed  but  the  Print  Plug-In  window  is  not  displayed,  install  the  newest
imagePROGRAF printer driver and then attempt step 3.
The  imagePROGRAF  Printer  Driver  for  iPFxxxx  is  either  not  installed  correctly  or  not  instal-
led at all. Please install.
(The iPFxxxx portion of the above message will reflect your printer name.)
• If the message below is displayed but the Print Plug-In window is not displayed, convert the image to
RGB color or grayscale...

4.Select  File from the  Plug-in printing  menu and then select the output plug-in that matches your printer.
The imagePROGRAF Print Plug-In for Digital Photo Professional window (hereinafter referred to as the Print Plug-
In window) is displayed.Important• If the profile was created by a commercially available profile creation tool, the profile may have been
created  in  ICCv4  format.  If  the  image  source  profile  is  ICCv4,  Adobe  CMM  is  required.  If  AdobeCMM has not been installed, a message...

Sheet Selection AreaThe tabs used to switch between each sheet on the Print Plug-In window are displayed.
When you select a tab, a sheet is displayed. The settings available on each sheet are as follows.
•Main Sheet
→P.311
• Page Setup Sheet
→P.315
• Color Settings Sheet
→P.318
• Print History Sheet
→P.319
• Support Sheet
→P.321
Preview Area
You can check the settings you made on the image in this area.
Windows Software 
>
 Print Plug-In for Photoshop/Digital Photo Professional 
>Print Plug-In Main...

About the settings available on the preview area, see "Preview Area ."→P.310
 
Button Area
This contains the buttons  Print, Quit  and Help
• Print Button
Click this button to begin printing.  
• Quit Button
Click this button to close the Print Plug-In window and return to application software.  
• Help Button
Click this button to display the Print Plug-In Help file.
Windows Software 
>
 Print Plug-In for Photoshop/Digital Photo Professional 
>iPF8300Print Plug-In Main Window4309
 

Preview AreaYou can check the settings you made on the image in this area.
Preview
Select the preview display method.
For more information about  Preview, see " Utilize Three Types of Previews ."
→P.330
SettingDetailsPrint Area LayoutDisplays the print range and the area out of the print range in the layout matching
the  Paper Size  set.
 
*You can change the image print position when you drag the image while the cur-
sor is displayed as 
.
ImageThe entire image is displayed.  
*You can select...

Perform Proof in Preview
Place a checkmark here to simulate the colors of the output product in the preview.Note• If  Auto (Color)  is selected under  Output Profile, some media types are enabled.
• If ICC profile is selected under  Output Profile, this is always enabled.
• The actual color balance of the print product and the simulation product may differ with some environments
and conditions. In addition, when you have selected an ICC Profile with  Output Profile and it is not compat-
ible with the...

PrinterThe printer types are displayed.
 
Select  button
Click this button to display the  Select Printer dialog box.
When you click the  OK button after selecting the printer in the  Select Printer dialog box, you can change the printer that
corresponds with Print Plug-In.
 
Media Type
This allows you to select the media type.
For more information about  Media Type, see " Customize Media Settings ."
→P.352
Note•Always  select  media  type  that  is  actually  set  in  the  printer.  When  the...