Canon Imageprograf Ipf8300 User Guide

CauseCorrective ActionBecause paper expands or contracts
depending on the environment of use, it may become narrower or wider
than the supported width for border-
less printing.However, note that this error may affect the printing quality.The paper is loaded askew.Press  ▲ or  ▼ to select  Change Paper  and straighten the paper so that the
edges are between the ink grooves for borderless printing.
Insert the roll firmly until it touches the flange of the Roll Holder.  (See " Attaching the Roll Holder...

Messages regarding ink
Ink insufficient.  .............................................................................................................................................. 1094
No ink left. ...................................................................................................................................................... 1094
Remaining level of the ink cannot be correctly detected. ..............................................................................1094
 
Close...

Close Ink Tank CoverCauseCorrective ActionThe Ink Tank Cover is open.Close the Ink Tank Cover.
The buzzer will stop once the error is cleared.
Ink tank is empty.
CauseCorrective ActionThere is no ink left in an ink tank.Open the Ink Tank Cover and replace the Ink Tank for which
the Ink Lamp is flashing.  (See " Replacing Ink Tanks .")
→P.984Error Message 
>
 Messages regarding ink 
>iPF8300Close Ink Tank Cover131095
 

Not much ink is left.CauseCorrective ActionNot much ink is left.Prepare a new Ink Tank.
We recommend replacing the Ink Tank with a new Ink Tank at
this point if you plan to print large-format or high-quantity jobs.
No ink tank loaded.
CauseCorrective ActionThere is no Ink Tank of the indicated color in the printer.Load or reload the Ink Tank.
 (See " Replacing Ink Tanks .")
→P.984
There is a problem with the Ink Tank.Replace it with a new Ink Tank.
 (See " Replacing Ink Tanks .")
→P.984...

Messages regarding printing or adjustment
Cannot execute this command. Use other paper. ......................................................................................... 1097
 
 
Cannot calibrate. ........................................................................................................................................... 1097
Excessive temperature or humidity. .............................................................................................................. 1097...

CauseCorrective ActionThe temperature or humidity where
the printer is installed is out of the
acceptable range for operation. (See " Types of Paper .")→P.768Press ▲ or  ▼ to select  Continue , and then press the  OK button to continue
with color calibration. However, note that correct adjustment may not be possi- ble.
Borderless printng not possible. Paper stretched or shrank.
CauseCorrective ActionThe loaded roll has expanded or contracted due to environmen-
tal conditions, making it wider or...

CauseCorrective ActionThe Printhead nozzles are clogged.2.Print a test pattern to check the nozzles.
 (See " Checking for Nozzle Clogging .")
→P.998
3. Clean the Printhead if the nozzles are clogged.
 (See " Cleaning the Printhead .")
→P.999
4. Execute  Adj. Quality  again.
 (See " Automatic Banding Adjustment (Adj. Quality) .")
→P.846
Highly transparent film is loaded
that cannot be used for automatic
feed amount adjustment.Press the  OK button to clear the error, and then adjust...

Messages regarding printheads
Cannot adjust printhead. ............................................................................................................................... 1100
 
PHeads: wrong pos.  ..................................................................................................................................... 1100
Wrong x printhead. (x is L, R, or not displayed) ............................................................................................ 1100
x printhead...

x printhead error (x is L, R, or not displayed)CauseCorrective ActionThere is a prob-
lem with the
Printhead.Follow these steps to replace the Printhead.
1. Open the Top Cover.
2. Replace  the  Printhead  L  with  a  new  one  if  Printhead  L  is  displayed  and  the  Printhead  R  if
Printhead R  is displayed. If neither left or right is indicated, replace both Printhead L and Print-
head R with new ones.
 (See " Replacing the Printhead .")
→P.1000
Follow these steps to replace the Printhead....

Messages regarding the maintenance cartridge
No maintenance cartridge. ............................................................................................................................ 1102
Wrong maintenance cartridge. ...................................................................................................................... 1102
 
Maint. cart. The level is low ..............................................................................................................................