Canon Imageprograf Ipf825 User Guide

7.
Click the  Page Setup tab to display the  Page Setup sheet.8.
In the  APage  Size   list,  click  the  size  of  the  original  as  specified  in  the  source  application.  In  this  case,  click
10"x12".
9. Select and click a roll paper in the  LPaper Source  list.
10. Select the  BBorderless Printing  check box to display the  Information dialog box. Enhanced Printing Options 
> Printing at full size >
iPF825
Borderless Printing at Actual Size (Windows) 3
95
 

11.
Select the width of the loaded roll in the  Roll Paper Width list—in this case, click  10-in. Roll (254.0mm).
12. Click OK  to close the Information dialog box.
13. In CBorderless Printing Method , click FPrint Image with Actual Size.
14. Confirm the print settings and print as desired. Note
• For tips on confirming print settings, see " Confirming Print Settings (Windows) →P.211
" Important
• When  Automatically  switch  paper  sources  (paper  size  priority)   is  enabled  on  the Device...

1.
This sets the  BFormat for  and CPaper Size. Note
• The configuration method varies depending on the OS and application software you are using.
If  Page 
Setup  is  displayed  in  the  application  menu,  the  settings  are  configured  by  opening  the  Page
Attributes  dialog box from  Page Setup. If it is not displayed, the settings are configured in the upper part of the printer driver displayed when
you select  Print from the application software menu. 2.
Select the printer in the  APrinter...

5.
Access the Main  pane.6.
In the  AMedia Type  list, select the type of paper that is loaded. In this case, click Heavyweight Coated Paper.
7. Make your selection in the  EPrint Target  list.
8. Make your selection in the  FPrint Quality  list.
9. Access the Page Setup pane. 10.
Select and click a roll paper in the  APaper Source  list.
Enhanced Printing Options > Printing at full size >
Borderless Printing at Actual Size (Mac OS X)
iPF8253
98
 

11.
Confirm that the roll paper width matches the paper size.
Make sure the width of the loaded roll is displayed in the  BRoll Width list—in this case,  10 in. (254.0mm). Note
• If the width of the roll loaded in the printer is not shown in  BRoll Width , click LPrinter Informa-
tion on the  Main pane to update the printer information. 12.
Make 
 sure  the CPage  Size   setting  matches  the  original  size  as  selected  in  CPaper  Size   in  the Page  Attributes
dialog box—in this case,...

13.
Confirm the print settings, and then click  MPrint  to start printing. Note
• For tips on confirming print settings, see " Confirming Print Settings (Mac OS X) →P.435
"
Enhanced Printing Options > Printing at full size >
Borderless Printing at Actual Size (Mac OS X)
iPF8253
100
 

Borderless Printing
Borderless Printing on Paper of Equivalent Size ............................................................................................. 101
Borderless Printing by Resizing Originals to Match the Paper Size (Windows) ..........................................102
Borderless Printing by Resizing Originals to Match the Paper Size (Mac OS X) ........................................105
 
Borderless Printing by Resizing Originals to Fit the Roll Width...

Fit Paper Size
Enlarge or reduce the original to match the size of the paper you are using. Note
• The printer  driver  automatically  enlarges  originals  3  mm  (0.12  in)  past  the  dimensions  of  the  paper  on  each
side. The 3 mm portion beyond the edge on each side is not printed.
For instructions on borderless printing of photos, images, and other documents to match the paper size, refer to the follow-
ing topics, as appropriate for your computer and operating system.
•Borderless Printing by...

4.
Make sure the  Main sheet is displayed. 5.
In the  AMedia Type  list, select the type of paper that is loaded. In this case, click Heavyweight Coated Paper.
6. Select the print target in the  EPrint Target  list.
7. Click the Page Setup tab to display the  Page Setup sheet. Enhanced Printing Options > Borderless Printing >
iPF825
Borderless Printing by Resizing Originals to Match the Paper Size (Windows) 3
103
 

8.
In the  APage Size  list, click the size of the original as specified in the application. In this case, click  10"x12".
9. Select and click a roll paper in the  LPaper Source list.
10. Select the  BBorderless Printing check box to display the  Information dialog box.11.
Select the width of the loaded roll in the  Roll Paper Width list—in this case, click  10-in. Roll (254.0mm).
12. Click OK to close the  Information dialog box.
13. In CBorderless Printing Method, click  DFit Paper Size .
14....