Canon Imageprograf Ipf825 User Guide

14.
Click GScaling and enter 120. Note
• You can specify enlargement that exceeds the paper size, but in this case, the portion off the edge of
the paper will not be printed.
• If the original size after enlargement or reduction is smaller than the paper size, the original is printed
in  the  upper-left  corner.  In  this  case,  you  can  center  originals  by  selecting  the  JPrint  Centered
check box.
15. Confirm the print settings, and then click  MPrint  to start printing. Note
• For tips on...

Printing at full size
Printing on Oversized Paper ............................................................................................................................. 86
Printing at Full Size (Windows) ..................................................................................................................... 87
Printing at Full Size (Mac OS X) ................................................................................................................... 88
 
Borderless Printing at...

Note
• Paper larger than the maximum size supported by the printer cannot be used as paper for oversized printing.
(See "Paper Sizes →P.626
")
• To 

specify  a  non-standard  paper  size  in  oversized  printing,  register  the  paper  size  as  a  Custom  Paper  Size.
Oversized  printing  is  not  available  with  Custom  Size.(See  "Printing  on  Non-Standard  Paper
Sizes →P.126
")
For instructions on oversized printing, refer to the following topics, as appropriate for your computer...

4.
In the  AMedia Type  list, select the type of paper that is loaded. In this case, click Plain Paper.
5. Click the  Page Setup tab to display the  Page Setup sheet.6.
Click  OSize Options to display the  Paper Size Options dialog box.
7. In the Paper Size Options  dialog box, select the Oversize check box in Display Series .
8. Click  OK to close the  Paper Size Options  dialog box.
9. Click Oversize - ISO A4  in the APage Size  list.
10. Select and click a roll paper in the  LPaper Source list.
11....

•
Page size: A4 (210.0 × 297.0 mm [8.3 × 11.7 in])
• Paper: Roll paper
• Paper type: Plain Paper
• Roll paper width: A2/A3 roll (420.0 mm [16.5 in])
 
1. This sets the  BFormat for  and CPaper Size. Note
• The configuration method varies depending on the OS and application software you are using.
If  Page 
Setup  is  displayed  in  the  application  menu,  the  settings  are  configured  by  opening  the  Page
Attributes  dialog box from  Page Setup. If it is not displayed, the settings are configured in...

5.
Access the Main  pane.6.
In the  AMedia Type  list, select the type of paper that is loaded. In this case, click Plain Paper.
7. Make your selection in the  EPrint Target  list.
8. Make your selection in the  FPrint Quality  list.
9. Access the Page Setup pane. 10.
Select and click a roll paper in the  APaper Source  list.
Enhanced Printing Options > Printing at full size >
Printing at Full Size (Mac OS X)
iPF8253
90
 

11.
Make sure the width of the loaded roll is displayed in the  BRoll Width list—in this case,  ISO A2/A3 (420.0mm). Note
• If the width of the roll loaded in the printer is not shown in  BRoll Width , click LPrinter Informa-
tion on the  Main pane to update the printer information. 12.
Make sure  CPage Size  shows 
 the original size as specified in CPaper Size  in the Page Attributes  dialog box—in
this case,  ISO A4 - Oversize. 13.
Confirm the print settings, and then click  MPrint to start printing....

Borderless Printing at Actual Size
Take advantage of borderless printing to print documents such as posters (made up mainly of photos or images) without a
surrounding margin, or border.
Borderless Printing
In regular printing, a margin required by the printer is added around the original. With borderless printing, you can print
documents without the margin, so that the printed image covers the entire surface of the paper. Important
• Borderless printing is only available with rolls.
• Paper 
you  can...

Print Image with Actual Size
Prints originals at actual size, without enlarging or reducing them. Originals must be prepared in a size that exceeds the
dimensions of the paper by 3 mm (0.12 in) on each side. Note
• Not all page sizes are available.
• Even 
if  you  prepare  originals  of  the  same  size  as  the  paper  size,  the  originals  are  automatically  enlarged
when  you  print  borderlessly  in  combination  with  resizing  originals  to  match  the  paper  size.  This  may  affect
image...

3.
Select the printer in the dialog box, and then display the printer driver dialog box.(See " Accessing the Printer Driv-
er Dialog Box from Applications (Windows) →P.216
")
4. Make sure the  Main sheet is displayed. 5.
In the  AMedia Type  list, select the type of paper that is loaded. In this case, click Heavyweight Coated Paper.
6. Select the print target in the  EPrint Target  list.
Enhanced Printing Options 
> Printing at full size >
Borderless Printing at Actual Size (Windows)
iPF8253
94