Canon Imageprograf Ipf815 User Guide

3.
Make sure the  Main sheet is displayed. 4.
In the  AMedia Type  list, select the type of paper that is loaded. In this case, click Plain Paper.
5. Select the print target in the  EPrint Target  list.
6. Click the  Page Setup tab to display the  Page Setup sheet. Enhanced Printing Options > Centering originals >
iPF815
Printing Originals Centered on Rolls (Windows) 3
155
 

7.
In the  APage  Size   list,  click  the  size  of  the  original  as  specified  in  the  application.  In  this  case,  click  ISO  A4  or
Letter (8.5"x11").
8. Select and click a roll paper in the  LPaper Source list.
9. Select the width of the loaded roll in the  MRoll Paper Width  list—in this case, ISO A3/A4 Roll (297.0mm).
10. Click the  Layout tab to display the  Layout sheet. 11.
Select the  EPrint Centered check box.
12. Confirm the print settings and print as desired. Note
• For tips...

1.
This sets the  BFormat for  and CPaper Size. Note
• The configuration method varies depending on the OS and application software you are using.
If  Page 
Setup  is  displayed  in  the  application  menu,  the  settings  are  configured  by  opening  the  Page
Attributes  dialog box from  Page Setup. If it is not displayed, the settings are configured in the upper part of the printer driver displayed when
you select  Print from the application software menu. 2.
Select the printer in the  APrinter...

5.
Access the Main  pane.6.
In the  AMedia Type  list, select the type of paper that is loaded. In this case, click Plain Paper.
7. Make your selection in the  EPrint Target  list.
8. Make your selection in the  FPrint Quality  list.
9. Access the Page Setup pane. 10.
Select and click a roll paper in the  APaper Source  list.
Enhanced Printing Options > Centering originals >
Printing Originals Centered on Rolls (Mac OS X)
iPF8153
158
 

11.
Make sure the width of the loaded roll is displayed in  BRoll Width —in this case,  ISO A3/A4 (297.0mm). Note
• If the width of the roll loaded in the printer is not shown in  BRoll Width , click LPrinter Informa-
tion on the  Main pane to update the printer information. 12.
Make 
 sure  the CPage  Size   setting  matches  the  original  size  as  selected  in  CPaper  Size   in  the Page  Attributes
dialog box—in this case,  ISO A4.13.
Select the  JPrint Centered check box. Enhanced Printing Options...

14.
Confirm the print settings, and then click  MPrint  to start printing. Note
• For tips on confirming print settings, see " Confirming Print Settings (Mac OS X) →P.429
" Printing Originals Centered on Sheets
You can print originals centered on a page—for example, if the paper is larger than the original, or if you are reducing the
original.
Centering originals on sheets
If you use paper larger than the original size or print originals after reduction, the printed images may be aligned in the...

3.
Make sure the  Main sheet is displayed. 4.
In the  AMedia Type  list, select the type of paper that is loaded. In this case, click Plain Paper.
5. Make your selection in the  EPrint Target  list.
6. Click the  Page Setup tab to display the  Page Setup sheet. Enhanced Printing Options > Centering originals >
iPF815
Printing Originals Centered on Sheets (Windows) 3
161
 

7.
In the  APage Size  list, click the size of the original as specified in the application. In this case, click  ISO A4.
8. Select the  CEnlarged/Reduced Printing check box.
9. Click  Match Page Size in the  GPaper Size  list.
10. Click FScaling and enter 50.
11. Click Cut Sheet in the  LPaper Source  list.
12. Click the  Layout tab to display the  Layout sheet.13.
Select the  EPrint Centered check box.
14. Confirm the print settings and print as desired. Note
• For tips on confirming print settings,...

Printing Originals Centered on Sheets (Mac OS X)
This topic describes how to center originals for printing on sheets, based on the following example. •Document: Any Type
• Page size: A4
• Paper: Sheets
• Paper type: Plain Paper
• Paper size: Non-standard
 
1. This sets the  BFormat for  and CPaper Size. Note
• The configuration method varies depending on the OS and application software you are using.
If  Page 
Setup  is  displayed  in  the  application  menu,  the  settings  are  configured  by  opening...

4.
If you  configured  the  settings  using  the  Page  Attributes  dialog  box,  click FOK  to  close  the  dialog  box,  and  then
select  Print from the application software menu.
5. Access the Main  pane.6.
In the  AMedia Type  list, select the type of paper that is loaded. In this case, click Plain Paper.
7. Make your selection in the  EPrint Target  list.
8. Make your selection in the  FPrint Quality  list.
Enhanced Printing Options 
> Centering originals >
Printing Originals Centered on Sheets...