Canon Imageprograf Ipf815 User Guide

7.
Click the  Page Setup tab to display the  Page Setup sheet.8.
In APage  Size,  click  the  size  of  the  original  as  specified  in  the  application  software.  In  this  case,  click  ISO  A3  or
Letter (8.5"x11").
9. Select and click a roll paper in the  LPaper Source list.
10. Select the width of the loaded roll in the  MRoll Paper Width list—in this case,  ISO A2/A3 Roll (420.0mm).
Enhanced Printing Options 
> Tiling and multiple pages per sheet >
iPF815
Printing Multiple Pages Per...

11.
Click the  Layout tab to display the  Layout sheet.12.
Select the  APage Layout  check box.
13. Click 4 Pages/Sheet in the  APage Layout list. Note
• You can select the layout order for placing four pages on a sheet and a frame border in the  Page Lay-
out Printing  dialog box by clicking  BSet.
14. Confirm the print settings and print as desired. Note
• For tips on confirming print settings, see " Confirming Print Settings (Windows) →P.206
" Printing Multiple Pages Per Sheet (Mac OS X)
This...

1.
This sets the  BFormat for  and CPaper Size. Note
• The configuration method varies depending on the OS and application software you are using.
If  Page 
Setup  is  displayed  in  the  application  menu,  the  settings  are  configured  by  opening  the  Page
Attributes  dialog box from  Page Setup. If it is not displayed, the settings are configured in the upper part of the printer driver displayed when
you select  Print from the application software menu. 2.
Select the printer in the  APrinter...

5.
Access the Layout pane. 6.
Click 4 in the  APages per Sheet  list. Note
• You can  choose  the  layout  order  and  specify  a  boundary  line  for  the  four  pages  in  BLayout  Direc-
tion and  CBorder.
7. Access the Main  pane.8.
In the  AMedia Type  list, select the type of paper that is loaded. In this case, click Plain Paper.
9. Make your selection in the  EPrint Target  list.
10. Make your selection in the  FPrint Quality  list.
Enhanced Printing Options 
> Tiling and multiple pages per sheet...

11.
Access the Page Setup pane. 12.
Select and click a roll paper in the  APaper Source list.
13. Make sure the width of the loaded roll is displayed in the  BRoll Width list—in this case,  ISO A2/A3 (420.0mm). Note
• If the width of the roll loaded in the printer is not shown in  BRoll Width , click LPrinter Informa-
tion on the  Main pane to update the printer information. Enhanced Printing Options 
> Tiling and multiple pages per sheet >
iPF815
Printing Multiple Pages Per Sheet (Mac OS X) 3
149
 

14.
Make sure  CPage Size  shows  the original size as specified in CPaper Size  in the Page Attributes  dialog box—in
this case,  ISO A3. 15.
Confirm the print settings, and then click  MPrint to start printing. Note
• For tips on confirming print settings, see " Confirming Print Settings (Mac OS X) →P.429
" Printing Posters in Sections
You can enlarge an original to print it in sections on several sheets. By assembling the printed sheets, you can create a post-
er larger than the maximum...

Note
• This method of poster printing is supported in Windows. Printing Large Posters (Windows)
You can enlarge an original to print it in sections on several sheets. By assembling the printed sheets, you can create a post-
er larger than the maximum supported paper size of the printer. This topic describes how to enlarge an A2 original for print-
ing it in sections on four sheets, based on the following example.
•Document: Poster
• Page size: A2 (420.0×594.0 mm [16.5 × 23.4 in])
• Paper: Sheets
• Paper...

6.
Click the  Page Setup tab to display the  Page Setup sheet.7.
In APage Size, click the size of the original as specified in the application. In this case, click  ISO A2.
8. Click Cut Sheet in the  LPaper Source list.
9. Click the Layout tab to display the  Layout sheet.Enhanced Printing Options > Tiling and multiple pages per sheet >
Printing Large Posters (Windows)
iPF8153
152
 

10.
Select the  APage Layout check box.
11. Click Poster (2 x 2) in the  APage Layout list. Note
• Follow the steps below to print only a portion of the poster as divided for printing.
• Click  BSet under  APage Layout to display the  Pages to Print dialog box.
• On the Pages to Print dialog box, clear the check boxes of the portion you do not want to print.
• Click OK to close the  Pages to Print dialog box.
12. Confirm the print settings and print as desired. Note
• For tips on confirming print...

Centering originals
Printing Originals Centered on Rolls ............................................................................................................... 154
Printing Originals Centered on Rolls (Windows) ......................................................................................... 154
Printing Originals Centered on Rolls (Mac OS X) ....................................................................................... 156
 
Printing Originals Centered on Sheets...