Canon Imageprograf Ipf815 Mfp M40 User Guide

Printer Specifications
Specifications .................................................................................................................................................. 765
Print Area ........................................................................................................................................................ 768Specifications
Important
• The following values may vary depending on the operating environment. Printer
Power supply
100–120 V AC (50/60 Hz), 220–240 V...

Interface
USB
2.0(*1
→P.766
)Format
Internal port
Mode Full-speed (12 Mbps), high-speed (480 Mbps), bulk transfer
Connector Series B (4-pin)Ethernet
FormatInternal port
Specification IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX/Auto-Negotia- tion, IEEE 802.3x Full Duplex
Protocols IPX/SPX (Netware 4.2, 5.1, 6.0), SNMP, TCP/IP, AppleTalk, HTTP*1: Use in USB 2.0 High Speed mode requires the following environment:
•Computer: USB 2.0 High-Speed–compatible
• Operating 
system: Windows 2000/Windows XP/Windows...

Paper Size
Roll width44-in. Roll (1117.6mm), 42-in. Roll (1066.8mm), JIS B0/B1 Roll
(1030.0mm), 36-in. Roll (914.4mm), ISO A0/A1 Roll (841.0mm),
30-in. Roll (762.0mm), JIS B1/B2 Roll (728.0mm), 24-in. Roll
(609.6mm), ISO A1/A2 Roll (594.0mm), JIS B2/B3 Roll
(515.0mm), 17-in. Roll (431.8mm), ISO A2/A3 Roll (420.0mm), 16-
in. Roll (406.4mm), 14-in. Roll (355.6mm), ISO A3/A4 Roll
(297.0mm), 10-in. Roll (254.0mm)
Sheets ISO A0, ISO A1, ISO A2, ISO A2+, ISO A3, ISO A3+ , ISO A4,
ISO B0, ISO B1, ISO B2, ISO B3...

Print Area
A margin required by the printer is added with respect to the size of paper loaded in the printer. Except in borderless print-
ing, the actual printing area corresponds to the paper size minus the space for this margin. Note
• Printable Area: The area that can be printed.
• There is no margin (that is, a margin of 0 mm) during borderless printing on rolls.
• Recommended Print Area: We recommend printing within this area.
• To 
print  so  that  your  original  matches  the  print  area...

•
Printable Area
A  margin  of  3  mm  (0.12  in)  on  all  sides  is  required.  During  borderless  printing,  the  margin  on  all  sides  is  0  mm.  For
information  on  paper  compatible  with  borderless  printing,  see  the  Paper  Reference  Guide.    (See  "Types  of  Paper.")→P.617
•
Recommended Print Area
A margin of 20 mm (0.79 in) on top, 5 mm (0.20 in) on bottom, and 5 mm (0.20 in) on left and right sides is required.
Printer Parts 
> Printer Specifications >
iPF815
Print Area 9
769
 

Network Setting
Network Setting
771Network Setting (Windows)
783Network Setting (Mac OS X)
793Network Setting >
iPF81510
770
 

Network Setting
Network Environment ...................................................................................................................................... 771
 
Configuring the IP Address on the Printer ....................................................................................................... 773
Configuring the IP Address Using the Printer Control Panel .......................................................................774
Configuring the IP Address Using ARP and PING...

•
Mac OS X 10.2.8–10.4
• Compatible computer
•A computer that runs one of the above operating systems Note
• The printer cannot be used over a LocalTalk network.
• Compatible with EtherTalk Phase 2.
• The imagePROGRAF printer driver is not compatible with AppleTalk. •
Printing over a NetWare network
•Compatible servers
•Novell NetWare 4.2/5.1/6.0
• Compatible clients
•Windows 2000 (Professional or Server)
• Windows XP (Professional)
• Compatible computer
•A computer that runs one of the above operating...

•
Example of a Macintosh network
In Macintosh networks, print over AppleTalk (EtherTalk) or TCP/IP, using Bonjour (Zeroconf) functions.
Note
• The imagePROGRAF printer driver is not compatible with AppleTalk. •
Example of a NetWare network
Note
• Even if there is a NetWare server in your network environment, you can use it in conjunction with TCP/
IP or AppleTalk. In this case, complete the settings for each protocol you will use. Configuring the IP Address on the Printer
You must configure the...

Important
• If you  use  a  DHCP  server  for  automatic  assignment  of  the  printer's  IP  address,  printing  may  no  longer  be
possible  after  the  printer  is  turned  off  and  on.  This  is  because  an  IP  address  different  from  before  has  beenassigned.  Thus,  when  using  DHCP  server  functions,  consult  your  network  administrator  and  configure  the
settings in one of the following ways.
• Configure the setting for dynamic DNS updating
In  RemoteUI,  activate  the  setting...