Canon Imageprograf Ipf815 Mfp M40 User Guide

Item
DetailsDefault
Setting
NDS PSer-
ver Tree Name
Specify the name of an NDS tree that has a NetWare print server.
(0–32 characters) —
Context Name Specify the name of a context that has a NetWare print server.
(0–255 characters) —
Print Server
Name Specify the name of a NetWare print server.
(0–64 characters) —
Print Server
Password Set a password for the print server.
(0–20 characters) —
Polling Interval Specify the interval to confirm jobs.
(1–255 seconds) 5
NPrinter Print Server Name Specify the...

6.
In IP Address ,  enter the IP address assigned to the printer, and then enter the subnet mask in  Subnet Mask and the
default gateway in  Gateway Address. Important
• You 
must specify the IP address here to be able to configure NetWare protocol settings using Remo-
teUI.
7. Click  Set.
8. Click  OK after the  Confirmation message dialog box is displayed.
9. Exit imagePROGRAF Device Setup Utility. Specifying the Frame Type Using the Printer Control Panel
1. Press the Menu button to display  MAIN...

10.
Press the Online  button to bring the printer online.
If any of the settings is changed, a message for confirmation is displayed. In this case, press the  OK button.Important
• Be sure to complete step 10. This will activate the values you have entered. Note
• If an error message is displayed, check the settings and correct any invalid values.
• To cancel the setup process, hold down the  Stop button for a second or more. Specifying NetWare Print Services
Before printing in a NetWare network, you...

When using queue server mode, all print server functions are supported, so there is no need for other print server
software  or  hardware.  In  NDS  queue  server  mode  (NDS  PServer),  the  NDS  print  server  is  used  for  printing.  In
bindery  queue  server  mode  (Bindery  PServer),  the  bindery  print  server  is  used  for  printing.  Note  that  if  you  use queue server mode, a NetWare user license is required for each network interface.
• Remote printer mode
In remote printer mode, the...

4.
To use the printer in remote printer mode, start the print server.
To  use  the  NetWare  file  server  as  the  print  server,  enter  LOAD  PSERVER.NLM  at  the  file  server  and  press  the
Enter key. Note
• This procedure is not required when using queue server mode.
Use PCONSOLE to set up the print server if bindery queue server mode or remote printer mode is used. 1. Log into NetWare as Supervisor and start PCONSOLE.
2. Switch to bindery mode.
3. If the print server has not been created, create...

1.
Start the  web  browser  and  enter  the  following  URL  in  the  Location  (or Address   )  box  to  display  the  RemoteUI
page.
http://printer IP address or name/
Example: http://xxx.xxx.xxx.xxx/
2. Select  Administrator Mode and click  Logon.
3. If a password has been set on the printer, enter the password.
4. Click  Network  in the Device Manager  menu at left to display the  Network page.
5. Click  Edit in the upper-right corner of the  NetWare group to display the Edit NetWare Protocol...

2.
In Print  Server  Name,  enter  the  name  of  the  print  server  created  in  " Specifying  NetWare  Print  Serv-
ices →P.787
."
3. In Print 

Server  Password,  enter  the  password  of  the  print  server  created  in  " Specifying  NetWare  Print
Services →P.787
."
4. In Polling Interval , specify the interval at which the printer checks the NetWare print queue.
• If you have selected NPrinter: Remote Printer Mode (Using a NDS Print Server)
1. In Print 

Server  Name ,  enter  the...

4.
As the destination port, specify the print queue created by configuring the NetWare print service settings.
Network Setting > Network Setting (Windows) > Configuring NetWare Network Settings
iPF81510
792
 

Network Setting (Mac OS X)
Configuring the Printer Driver Destination  ...................................................................................................... 793
 
Configuring the Printer's AppleTalk Network Settings ..................................................................................... 793
Configuring the Destination for AppleTalk Networks  ...................................................................................... 794
Configuring the Destination for TCP/IP...

Item
Details Default Setting
Zone (*2) However, do not use the following single-byte characters: @, :, and =. Also avoid us- ing * (which represents the default zone) in the middle of a string. **1:The object name you have specified in 
Name is  displayed in Printer Setup Utility  (or Print Center  ) in Mac OS
X  10.2.8–10.4.  If  you  use  multiple  printers  in  the  same  zone,  assign  a  unique  name  to  each  printer.  By  default,
the  network  interface  name  is  Canon  NB-17FB  (xxxxxx)....