Canon Imagepress C800 User Guide

21
Loading Paper
 Paper  Drawer 
Paper Capacity Upper, middle, and lower decks: 550 sheets (80 g/m2) each
Paper Type Thin 1 to 2, Plain 1 to 2, Heavy 1 to 4, Colour, Recycled, Pre-Punched, Transparency, Clear Film, Tab, Bond,  Letterhead, Textured, Vellum, and Envelopes
Paper Size 330 mm x 483 mm, 320 mm x 450 mm (SRA3), 305 mm x 457 mm, A3, A4, A4R,\
 A5R, Custom Size (100 mm x 148  mm to 330.2 mm x 487.7 mm), and Envelopes
  
 Multi-drawer Paper Deck-B1 OPTION 
Paper Capacity Upper, middle, and lower...

22
 
▀   Registering Paper Types in the Paper Database 
 Register all paper types you are going to use with this machine. You can register paper types by selecting paper types 
from the Paper Database. 
 NOTE 
 If you load paper which is already registered in the machine, such as plain or recycled paper, this step is not necessary. 
Proceed to the next step "Loading Paper into the Paper Drawer". 
  
1Press  .
2Press [Preferences]  [Paper Settings]  [Paper Type Management Settings].
3Press...

23
Loading Paper
 
▀   Loading Paper into the Paper Drawer 
1Open the paper drawer.
• 
Gently pull out the paper drawer until it stops.
2Adjust the position of the paper drawer guides.
• Slide each guide while squeezing it on the top to align for the 
desired paper size.
3Load the paper stack into the paper drawer.
1Load the paper stack against the right wall of the paper drawer.
2Gently push the paper drawer back into the machine until it clicks 
into place in the closed position.
  
 NOTE 
•   Make...

24
 
▀   Selecting Paper Types from the Paper Database 
 Select the loaded paper type from the Paper Database. 
1Press  .
2Press [Preferences]  [Paper Settings]  [Paper Settings].
3Select the paper source in which you loaded paper  
press [Set].
• 
If you load paper other than standard paper, select [Custom 
Size] or [Envelope].
4Select the loaded paper type from the list  press 
[OK].
5Confirm that the selected paper type is displayed in 
  press [OK].
 

25
 Cleaning and Maintenance 
 For optimum operation of the machine, we recommend to clean and check the machine regularly. 
 
▀ Cleaning the Platen Glass 
 If originals cannot be scanned properly, follow the cleaning procedure below. Clean with a cloth which is wrung after 
being dampened in water, and then clean with a soft and dry cloth. Use the provided glass cleaning cloth for simple 
cleaning. 
1Clean the Platen Glass.
•  Clean the platen glass and the underside of the feeder.
  
 
▀ Cleaning the...

26
 
▀ Cleaning the Feeder 
 If originals which are fed from the feeder become dirty, follow the cleaning procedure below. Clean with a cloth which 
is wrung after being dampened in water, and then clean with a soft and dry cloth. Use the provided glass cleaning 
cloth for simple cleaning. 
1Clean the original scanning area.
•  Open the feeder and clean the original scanning area (thin glass 
strip).
2
1
2Open the covers.
1Pull the lever above the feeder, and open the cover.
2Open the inside cover....

27
Cleaning and Maintenance
 
▀ Automatic Feeder Cleaning 
 If originals which are fed from the feeder become dirty, follow the procedure below. 
1Place 10 sheets of blank paper into the feeder.
• 
Use A4 plain paper.
2Press  .
3Press [Adjustment/Maintenance]   [Maintenance]  [Clean Feeder].
4Press [Start].
  
 
▀ Cleaning the Inside of the Main Unit 
 If output paper becomes dirty, follow the procedure below. 
1Press  .
2Press [Adjustment/Maintenance]   [Maintenance]  [Clean Inside Main Unit]....

28
 
▀ Refreshing the Fixing Belt 
 If streaks appear on the output paper, or gloss unevenness occurs in the high density area of the printed heavy paper, 
follow the procedure below. 
1Press  .
2Press [Adjustment/Maintenance]   [Maintenance]  [Refresh Fixing Belt].
3Press [Start].
 NOTE 
 The fixing belt is refreshed automatically every several sheets of paper is printed. You can adjust the refresh frequency 
and time in [Fixing Roller Auto Refresh Level]. 
  
 
▀ Cleaning the Touch Panel Display...

29
Cleaning and Maintenance
 
▀ Inspection of the Breaker 
 This machine has a breaker that detects excess current or leakage current. Make sure to test the breaker once a month 
by following the procedure below. 
1Turn OFF the main power.
• 
Make sure that the main power is turned OFF, before inspecting 
the breaker.
2Push the test button located on the rear of the machine.
• Push the test button with the tip of a ball-point pen or a similar 
object. Briefly push the test button.
3Confirm that the...

30
 Consumables 
 The following consumables are available for this machine. For more information, contact your local authorized Canon 
dealer. For information on using and storing consumables, see "Consumables," on p. 12. 
  
 Recommended  Paper 
 In addition to plain paper, other types of paper stock are available, such as recycled paper, colour paper, 
transparencies/clear film (recommended for this machine), vellums, and labels. For high-quality printouts, use paper 
recommended by Canon....