Canon Imagepress C700 User Guide

11
Important Safety Instructions
 
▀ Maintenance and Inspections 
 Clean this machine regularly. The machine may not operate properly if dust accumulates. Make sure to read the 
followings when cleaning the machine. 
 WARNING 
• 
 When cleaning the machine, first turn OFF the main 
power switch, then disconnect the power cord. 
Failure to observe these steps may result in a fire or 
electrical shock. 
•   Clean the machine using a cloth which is wrung 
after being damped in water. Do not use alcohol,...

12
 
▀   Consumables 
 WARNING 
• 
 If you accidentally spill or scatter toner, carefully 
wipe up the loose toner with a damp, soft cloth and 
avoid inhaling any toner dust. Do not use a vacuum 
cleaner that is not equipped with safety measures 
to prevent dust explosions to clean up loose toner. 
Doing so may cause damage to the vacuum cleaner 
or result in a dust explosion due to static discharge.  • 
 Do not burn or throw toner cartridges in open 
flames. Do not store toner cartridges in places...

13
 Parts and Their Functions 
 This section provides you with the names and functions of all the parts of the machine. The keys and display on the 
control panel are also described. Read this section to use the machine’s various functions smoothly.
 
  "Optional Products" in the e-Manual 
 
▀ Front  View 
 
123
45
 
 1 USB Port (1) 
 Use to connect memory media to the machine via 
USB. 
 2 Upright Control Panel-D1 
 Includes the keys, touch panel display, and 
indicators required for operating...

14
 
▀ Back  View 
 
1
2
3
4
5
 
 1 LAN Port 
 Use a LAN cable to connect the machine to a 
network. 
 2 USB Port (2) 
 Use the USB port to connect external hard disks 
and other devices to the machine. 
 3 USB Connector 
 Use a USB cable to connect the machine to a 
computer. 
 4 Breaker 
 Detects excess current or leakage current. 
 5 Test Button 
 Press this button to test the circuit breaker. 
 

15
Parts and Their Functions
 
▀ Internal  View 
 
1
2
34
5 6
 
 1 Toner Cartridge 
 This cartridge contains toner. Pull out this cartridge 
when replacing it with a new one. 
 2 Front Cover 
 Open this cover to clear a paper jam in the 
 fixing transport unit. 
 3 Toner Replacement Cover 
 Open this cover to replace the toner cartridge. 
 4 Fixing Transport Unit 
 Pull the fixing transport unit out to clear a paper jam. 
 5 Waste Toner Container 
 Waste toner accumulates in this container. Pull out...

16
 
▀ Control Panel (Upright Control Panel-D1) 
  
 
12 34
5
6
7
8
9
10
11
12
13
14
15
1 6
17 18 19 
 1 Processing/Data Indicator 
 Blinks green when the machine is performing 
operations, and maintains a steady green light 
when received data is stored in memory. 
 2 Error Indicator 
 Blinks or lights if there is an error in the machine. 
When the Error indicator blinks, follow the 
instructions that appear on the touch panel display. 
When the Error indicator maintains a steady red 
light, contact...

17
Parts and Their Functions
 12 Reset key 
 Press to restore the standard settings of the 
machine. 
 13 ID (Log In/Out) key 
 Press to log in/out when a login service such as 
Department ID Management or SSO-H has been 
set. 
 14 Touch Panel Display 
 The settings screen for each function is shown on 
this display. 
 15 Brightness Adjustment Dial 
 Use to adjust the brightness of the touch panel 
display. 
 16 Volume Settings key 
 Press to display the screen to specify the audible 
tones for the fax...

18
 Status Monitor/Cancel Screen 
 If you press , the Status Monitor/Cancel screen appears, and you can confirm the status of jobs and 
consumables on this screen. By obtaining information, such as the completion time of the current job or the amount 
of paper remaining, you can perform smooth printing operation without interruption. 
  Useful situations 
•   When you want to know the completion time of jobs 
•   When you want to check the amount of paper remaining for efficient paper loading 
•   When...

19
 How to Turn ON the Main Power 
 This section explains how to turn ON the main power. 
 
▀ Turning ON the Main Power 
 Make sure that the power plug is firmly inserted into the power outlet, and the breaker is turned ON. 
1Open the main power switch cover.
2Press the main power switch to the "|" side.
• 
The main power indicator on the control panel lights.
 IMPORTANT 
 If you want to turn ON the main power again, wait for at least 10 seconds after the main power and the main power 
indicator...

20
 Loading  Paper 
 Load paper by following the procedure below. In this section, A4 custom size paper is used as an example. 
ConfirmationConfirm the paper types that can be loaded. 
 "Available Paper," on p. 20
PreparationRegister all paper types you are going to use.  
 "Registering Paper Types in the Paper Database," on p. 22
OperationLoad paper in the paper drawer.  
 "Loading Paper into the Paper Drawer," on p. 23
RegistrationSpecify the loaded paper size and type for the...