Canon Imageclass Mf8050cn Quick Start Guide

9
  
 You can perform color 
correction by selecting 
 to obtain optimum 
copy results or printout 
results. For details on the 
procedure, see the following 
Performing Color 
Correction .  •
 Adjust image to
reproduce original
color?
NoYe s
 
 Press  [OK]. 
 Use the numeric keys, 
and then press [OK]. 
 Move the cursor with [] or []. 
 Switch to  or  with 
[
] or []. 
•
•
 
Current Time Settings
2010 01/01 12:5
2AM
 
 Check and press [OK]. 
 
Check that paper is
loaded in Drawer 1.
Next...

10
   Setting a Paper Size and Type 
 Press  [] (Select Paper/
Settings).  Select with [] or [], and then 
press [OK].  Select with [] or [], and then 
press [OK]. 
 Select with [] or [], and then 
press [OK].  Select with [] or [], and then 
press [OK]. 
 
Select Paper MP Tray
LTR:Plain 2
Paper Settings
1
   
Paper Settings
Multi-Purpose Tray
Drawer 1
Register Custom Paper
 
 
Paper Size LT R
LGL
STMT
EXEC
   
Paper Type
Plain 2 (20 lb Bond-
Recycled
Color
Heavy 1 (25 lb Bond...
   Press  [
] (Reset)...

11
    Specifying Initial Fax Settings and Connecting a Telephone Cable 
 1.  Register the fax number and username. 
 Enter information into the machine using the 
following keys. 
 
OK C #
Numeric keys
 
 Entering letters and symbols 
 Enter with the numeric keys or [  ] (Symbols). 
Keys used Entry mode: 
  Entry mode: 
  Entry mode: 
@.-_/ @.-_/ 1
ABC abc 2
DEF def 3
GHI ghi 4
JKL jkl 5
MNO mno 6
PQRS pqrs 7
TUV tuv 8
WXYZ wxyz 9
(Nonenterable text) (Nonenterable text) 0
@ . / - _ ! ? & $ % # ( 
) [ ]...

12
  
 2.  S  et the fax receive mode. 
 mode is set.
→  Proceed to Step 3.
Receives a fax automatically.
Does not use the telephone.*


 If connecting with the telephone in auto receive mode, the telephone 
rings when receiving a fax or telephone call. You can answer the 
telephone while the telephone is ringing. To configure so that the 
telephone does not ring, see “Incoming Ring” in the 
 e-Manual. 
*
 Do you want to use
this machine for fax
only (no telephone)?

 
 
Do you want to auto-
receive...

13
 3.    Connect a telephone line. 
 Press  [OK]. 
 Connect phone line.Follow instructions
on the next screen.
Connect line to A.
*Next: Press OK
Connect phone line.Follow instructions
on the next screen
to make connections:
1. Phone line to A
 
 The displayed screen varies depending on the specified receive mode. 
 Connect telephone cables to the machine as needed. 
 
Telephone line
connector Telephone
(B)
(A)
 
 
Preface1Installing the Machine2Configuring and Connecting the Fax3Connecting to a...

14
 4.  Change the line type. 
 By default, the telephone line type on the machine is set to tone dialing. If you use tone dialing, skip the following procedure. 
 If you use pulse dialing, follow the procedure below and change the telephone line type setting on the machine to pulse 
dialing. 
 If you do not know the type of telephone line you use, contact your local telephone company. 
 Press  [
] (Menu). 
 Select  with [] or [], and then press [OK]. 
 Select  with [] or [], and then press [OK]....

15
    Selecting a Method for Connecting the Machine to a Computer 
 1.  Connect the LAN cable. 
  
 Connect the cable. 
  
 Make sure that the 
green indicator of 
the LAN port is on.  If the indicator is not on 
 Check the following. 
 Whether the machine and hub are 
connected using a LAN cable 
 Whether the power of the machine is 
turned ON •
•
  About the LAN cable 
 The machine does not come with a LAN cable or a hub. 
Have cables or a hub ready as needed. 
 Use a Category 5 or higher twisted...

16
 
   Installing via Network Connection (For Windows) 
 2.  Turn on the computer, and then log on as a user with  administrative privileges. 
 3.  Install the MF Drivers and MF Toolbox. 
 If you have already logged on, exit all applications which are running. 
 
 
 Insert the CD-ROM. 
 Click. 
 Click. 
 Read the contents of the License 
Agreement. 
 Click. 
 If the top screen does not appear 
 Windows 2000, XP, and Server 2003  1.  From the [Start] menu, select [Run]. 
 2.  Enter D:\Minst.exe, and...

17
 If no devices are displayed in [Device List] 
 Perform the following procedure. 
 1.  Check the following.  The computer and device are connected via the 
network. 
 The device is turned on. 
 The IP address is set correctly. 
 The computer and device are on the same subnet. 
 Security software has been exited. 
 2.  Click [Update Device List]. 
 If any devices are not displayed by performing the 
above procedure, perform the following procedure.   1.  Click [Search by IP Address]. 
 2.  Enter the...

18
   Installing with USB Connection (For Windows) 
 1.  Turn on the computer, and then log on as a user with administrative privileges. 
 2.  Install the MF Drivers and MF Toolbox. 
 If you have already logged on, exit all applications which are running. 
 Connect the USB cable after installing the software. 
 Make sure that the power of the machine is turned ON when connecting the USB cable. •
•
  
 Insert the CD-ROM. 
 Click. 
 If the top screen does not appear 
 Windows 2000, XP, and Server 2003  1....